XMLAWT-00-0000-000HT40F6 - Cree, Inc.

Product family data sheet

registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

WWW.CREE.COM/XLAMP

CLD-DS33 REV 11E

Cree® XLamp® XM-L LEDs

PRODUCT DESCRIPTION

The XLamp® XM-L LED is the industry’s

highest performance, single-die white

lighting-class LED. The XLamp XM-L LED

is 20% more efcient than the XLamp

XP-G LED at the same current, and can

deliver 1000 lumens with 100 lumens per

watt efcacy. The XLamp XM-L LED offers

Cree’s industry-leading features: wide

viewing angle, symmetrical package,

unlimited oor life and electrically neutral

thermal path.

XLamp XM-L LEDs can enable LED light

into new applications that require tens

of thousands of lumens, such as high

bay and high-output area lighting. The

XM-L is also the ideal choice for lighting

applications where high light output and

maximum efcacy are required, such as

LED light bulbs, outdoor lighting, portable

lighting, indoor lighting and solar-

powered lighting.

FEATURES

• Maximum drive current: 3000mA

• Low thermal resistance: 2.5°C/W

• Maximum junction temperature:

150°C

• Viewing angle: 125°

• Available in cool white, 80-CRI

minimum neutral white and 80-CRI,

85-CRI and 90-CRI warm white

• ANSI-compatible chromaticity bins

• Unlimited oor life at

≤ 30ºC/85% RH

• Reow solderable - JEDEC

J-STD-020C

• Electrically neutral thermal path

• RoHS and REACh compliant

• UL® recognized component

(E349212)

TABLE OF CONTENTS

Characteristics ....................................... 2

Flux Characteristics ............................... 3

Relative Spectral Power Distribution .... 4

Relative Flux vs. Junction

Temperature ........................................... 4

Electrical Characteristics ....................... 5

Relative Flux vs. Current ........................ 5

Relative Chromaticity vs. Current (Cool

White) ...................................................... 6

Relative Chromaticity vs. Temperature

(Cool White) ............................................ 6

Relative Chromaticity vs. Current

(Warm White) ......................................... 7

Relative Chromaticity vs. Temperature

(Warm White) ......................................... 7

Typical Spatial Distribution .................... 8

Thermal Design ...................................... 8

Reow Soldering Characteristics .......... 9

Notes .................................................... 10

Mechanical Dimensions ...................... 12

Tape and Reel ....................................... 13

Packaging ............................................. 14

Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of

Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

2

XLamp® Xm-L LED

CHARACTERISTICS

Characteristics Unit Minimum Typical Maximum

Thermal resistance, junction to solder point °C/W 2.5

Viewing angle (FWHM) degrees 125

Temperature coefcient of voltage mV/°C -2.1

ESD withstand voltage (HBM per Mil-Std-883D) V8000

DC forward current mA 3000

Reverse voltage V 5

Forward voltage (@ 700mA) V2.9 3.5

Forward voltage (@ 1500mA) V 3.1

Forward voltage (@ 3000mA) V 3.35

LED junction temperature °C 150

Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of

Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

3

XLamp® Xm-L LED

FLUX CHARACTERISTICS (TJ

The following table provides several base order codes for XLamp XM-L LEDs. It is important to note that the base order codes listed here

are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-

code nomenclature, please consult the XLamp XM-L LED Binning and Labeling document.

Color

CCT Range Minimum Luminous Flux @



Calculated Minimum

 Order Code

Min. Max. Group  1000 mA 1500 mA 2000 mA

Cool White 5000 K 8300 K

T5 260 360 511 643 XMLAWT-00-0000-0000T5051

T6 280 388 551 692 XMLAWT-00-0000-0000T6051

U2 300 416 590 742 XMLAWT-00-0000-0000U2051

Neutral White 3700 K 5000 K

T4 240 332 472 593 XMLAWT-00-0000-000LT40E4

T5 260 360 511 643 XMLAWT-00-0000-000LT50E4

80-CRI White 2600 K 4300 K

T2 200 277 393 494 XMLAWT-00-0000-000HT20E7

T3 220 305 433 544 XMLAWT-00-0000-000HT30F7

Warm White 2600 K 3700 K

T2 200 277 393 494 XMLAWT-00-0000-000LT20E7

T3 220 305 433 544 XMLAWT-00-0000-000LT30F7

85-CRI White 2600 K 3200 K

S4 164 227 323 406 XMLAWT-00-0000-000PS40E7

S5 172 238 338 425 XMLAWT-00-0000-000PS50E7

S6 182 252 358 450 XMLAWT-00-0000-000PS60E7

90-CRI White 2600 K 3200 K

S4 164 227 323 406 XMLAWT-00-0000-000US40E7

S5 172 238 338 425 XMLAWT-00-0000-000US50E7

S6 182 252 358 450 XMLAWT-00-0000-000US60E7

Notes:

• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on

CRI measurements. See the Measurements section (page 10).

• Typical CRI for Cool White (5000 K – 8300 K CCT) is 65.

• Typical CRI for Neutral White (3700 K – 5000 K CCT) is 75.

• Typical CRI for Warm White (2600 K – 3700 K CCT) is 80.

• Minimum CRI for 80-CRI White is 80.

• Minimum CRI for 85-CRI White is 85.

• Minimum CRI for 90-CRI White is 90

* Calculated ux values are for reference only.

Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of

Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

4

XLamp® Xm-L LED

RELATIVE SPECTRAL POWER DISTRIBUTION

RELATIVE FLUX VS. JUNCTION TEMPERATURE (IF m

0

20

40

60

80

100

380 430 480 530 580 630 680 730 780

Relative Radiant Power (%)

Wavelength (nm)

5000 K - 8300 K CCT

3700 K - 5000 K CCT

2600 K - 3700 K CCT

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

25 50 75 100 125 150

Relative Luminous Flux

Junction Temperature (ºC)

Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of

Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

5

XLamp® Xm-L LED

ELECTRICAL CHARACTERISTICS (TJ

RELATIVE FLUX VS. CURRENT (TJ

Electrical Characteristics (Tj = 25ºC)

0

200

400

600

800

1000

1200

1400

1600

1800

2000

2200

2400

2600

2800

3000

2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6

Forward Current (mA)

Forward Voltage (V)

Relative Intensity vs. Current (Tj = 25ºC)

0%

25%

50%

75%

100%

125%

150%

175%

200%

225%

250%

275%

300%

325%

350%

0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000

Relative Luminous Flux

Forward Current (mA)

Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of

Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

6

XLamp® Xm-L LED





Cool White

-0.020

-0.015

-0.010

-0.005

0.000

0.005

0.010

0.015

0.020

0 500 1000 1500 2000 2500 3000

Current (mA)

ΔCCx

ΔCCy

Cool White

-0.020

-0.015

-0.010

-0.005

0.000

0.005

0.010

0.015

0.020

25 50 75 100 125 150

Tsp (°C)

ΔCCx

ΔCCy

Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of

Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

7

XLamp® Xm-L LED





Warm White

-0.020

-0.015

-0.010

-0.005

0.000

0.005

0.010

0.015

0.020

0 500 1000 1500 2000 2500 3000

Current (mA)

ΔCCx

ΔCCy

Warm White

-0.020

-0.015

-0.010

-0.005

0.000

0.005

0.010

0.015

0.020

25 50 75 100 125 150

Tsp (°C)

ΔCCx

ΔCCy

Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of

Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

8

XLamp® Xm-L LED

TYPICAL SPATIAL DISTRIBUTION

THERMAL DESIGN

The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end

product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life

and optical characteristics.

0%

20%

40%

60%

80%

100%

-100 -80 -60 -40 -20 0 20 40 60 80 100

Relative Luminous Intensity

Angle (º)

Thermal Design

0

500

1000

1500

2000

2500

3000

3500

0 20 40 60 80 100 120 140 160

Maximum Current (mA)

Ambient Temperature (ºC)

Rj-a = 4 °C/W

Rj-a = 7 °C/W

Rj-a = 10 °C/W

Rj-a = 15 °C/W

Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of

Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

9

XLamp® Xm-L LED

REFLOW SOLDERING CHARACTERISTICS

In testing, Cree has found XLamp XM-L LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general

guideline, Cree recommends that users follow the recommended soldering prole provided by the manufacturer of the solder paste used.

Note that this general guideline may not apply to all PCB designs and congurations of reow soldering equipment.

Profile Feature Lead-Free Solder

Average Ramp-Up Rate (Tsmax to Tp) 1.2°C/second

Preheat: Temperature Min (Tsmin) 120 °C

Preheat: Temperature Max (Tsmax) 170 °C

Preheat: Time (tsmin to tsmax)65-150 seconds

Time Maintained Above: Temperature (TL) 217 °C

Time Maintained Above: Time (tL) 45-90 seconds

Peak/Classication Temperature (Tp) 235 - 245 °C

Time Within 5°C of Actual Peak Temperature (tp) 20-40 seconds

Ramp-Down Rate 1 - 6 °C/second

Time 25°C to Peak Temperature 4 minutes max.

Note: All temperatures refer to the topside of the package, measured on the package body surface.

TP

TL

Temperature

Time

t 25˚C to Peak

Preheat

ts

tS

tP

25

Ramp-down

Ramp-up

Critical Zone

TL to TP

Tsmax

Tsmin

Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of

Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

10

XLamp® Xm-L LED

NOTES

Measurements

The luminous ux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specications only

and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number

of factors that are not within Cree’s control and are not intended or provided as operational specications for the products. Calculated

values are provided for informational purposes only and are not intended as specications.



Please read the LED Reliability Overview for details of the qualication process Cree applies to ensure long-term reliability for XLamp

LEDs and details of Cree’s pre-release qualication testing for XLamp LEDs.

Lumen Maintenance

Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.

For information on the specic LM-80 data sets available for this LED, refer to the public LM-80 results document.

Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.

Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect

the LED junction temperature.

Moisture Sensitivity

Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.

Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.

Once the MBP is opened, XLamp XM-L LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited oor life in

conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs

in the original MBP.

RoHS Compliance

The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold

limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as

implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product

Documentation sections of www.cree.com.

REACh Compliance

REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)

has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to

insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available

upon request.

Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of

Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

11

XLamp® Xm-L LED

UL® Recognized Component

Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a re and electrical enclosure per ANSI/

UL 8750.

Vision Advisory

WARNING: Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer

to the LED Eye Safety application note.

NOTES - CONTINUED

Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of

Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

12

XLamp® Xm-L LED

MECHANICAL DIMENSIONS

Thermal vias, if present, are not shown on these drawings.

All measurements are ±.13 mm unless otherwise indicated.

SIZE

TITLE

OF

REV.

SHEET

C

DRAWING NO.

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

SCALE

A

B

C

D

123456

6 5 4 3 2 1

A

B

C

D

Phone (919) 313-5300

Fax (919) 313-5558

4600 Silicon Drive

Durham, N.C 27703

UNAUTHORIZED PERSON WITHOUT

THE WRITTEN CONSENT

MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY

CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT

CONTAINED WITHIN ARE THE PROPRIETARY AND

CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

X° ± .5 °

.XXX ± .25

.XX ± .75

.X ± 1.5

FOR SHEET METAL PARTS ONLY

.XX ± .25

.XXX ± .125

X° ± .5 °

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN

MILLIMETERS AND AFTER FINISH.

TOLERANCE UNLESS SPECIFIED:

SURFACE FINISH:

1.6

5.00

3.02

.50

2.78

3.78

4.78

0.73

R2.26

4.78

.80

.25

.50

.80

.25

.97

4.78

.50

2.78

4.78

1/116.000

G

2610-00009

OUTLINE DRAWING, 5050 XM

--

----

04/9/10D. CRONIN

REVISONS

REV DESCRIPTION BY DATE APP'D

A NEW RELEASE DC 4/15/10

B Added die outline DDS 10/22/10 B.Stanton

C ADDED DIMENSION FOR TOP OF FLASH DC 11/18/10 B.Stanton

D 3.02 WAS 3.09 DC 1/5/11 B.Stanton

E ADDED DOME RADIUS DC 10/23/12

F CORRECTED DOME RADIUS DC 11/15/12

G CHANGED SOLDERPAD AND STENCIL DC 6/16/15

RECOMMENDED PCB SOLDER PAD

RECOMMENDED STENCIL PATTERN

(HATCHED AREA IS OPENING)

ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED

Top View Bottom View

Side View

SIZE

TITLE

OF

REV.

SHEET

C

DRAWING NO.

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

SCALE

A

B

C

D

123456

6 5 4 3 2 1

A

B

C

D

Phone (919) 313-5300

Fax (919) 313-5558

4600 Silicon Drive

Durham, N.C 27703

UNAUTHORIZED PERSON WITHOUT

THE WRITTEN CONSENT

MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY

CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT

CONTAINED WITHIN ARE THE PROPRIETARY AND

CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

X° ± .5 °

.XXX ± .25

.XX ± .75

.X ± 1.5

FOR SHEET METAL PARTS ONLY

.XX ± .25

.XXX ± .125

X° ± .5 °

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN

MILLIMETERS AND AFTER FINISH.

TOLERANCE UNLESS SPECIFIED:

SURFACE FINISH:

1.6

5.00

3.02

.50

2.78

3.78

4.78

0.73

R2.26

4.78

.80

.25

.50

.80

.25

.97

4.78

.50

2.78

4.78

1/116.000

G

2610-00009

OUTLINE DRAWING, 5050 XM

--

----

04/9/10D. CRONIN

REVISONS

REV DESCRIPTION BY DATE APP'D

A NEW RELEASE DC 4/15/10

B Added die outline DDS 10/22/10 B.Stanton

C ADDED DIMENSION FOR TOP OF FLASH DC 11/18/10 B.Stanton

D 3.02 WAS 3.09 DC 1/5/11 B.Stanton

E ADDED DOME RADIUS DC 10/23/12

F CORRECTED DOME RADIUS DC 11/15/12

G CHANGED SOLDERPAD AND STENCIL DC 6/16/15

RECOMMENDED PCB SOLDER PAD

RECOMMENDED STENCIL PATTERN

(HATCHED AREA IS OPENING)

ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED

Recommended PCB Solder Pad Recommended Stencil Pattern



Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of

Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

13

XLamp® Xm-L LED

TAPE AND REEL

All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.

All dimensions in mm.

SIZE

TITLE

OF

REV.

SHEET

C

DRAWING NO.

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

X° ± .5 °

.XXX ± .010

.XX ± .03

.X ± .06

FOR SHEET METAL PARTS ONLY

.XX ± .01

.XXX ± .005

X° ± .5 °

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

AND AFTER FINISH.

TOLERANCE UNLESS SPECIFIED:

SCALE

A

B

C

D

123456

6 5 4 3 2 1

A

B

C

D

Phone (919) 313-5300

Fax (919) 313-5558

4600 Silicon Drive

Durham, N.C 27703

UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT

MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY

CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT

CONTANED WITHIN ARE THE PROPRIETARY AND

CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

SURFACE FINISH:

63

330

+.25

-.75

12.4

+1.0

-.5

MEASURED AT EDGE

16.4

+0.2

.0

MEASURED AT HUB

12.4

+.2

.0

MEASURED AT HUB

±.213.1

1.9±.4

±.421

60° 60°

1/10.500

A

2400-00009

REEL, 13" X 12MM, 3 PIECE SNAP

-

ANTI-STATIC HIPS

----

09/29/09D. CRONIN

2400-00009

INDEX QTY ITEM COMMENTS

1 1 2400-00009-CORE

2 2 2400-00009-REEL

REVISONS

REV DESCRIPTION BY DATE APP'D

SIZE

TITLE

OF

REV.

SHEET

C

DRAWING NO.

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

SCALE

A

B

C

D

123456

6 5 4 3 2 1

A

B

C

D

Phone (919) 313-5300

Fax (919) 313-5558

4600 Silicon Drive

Durham, N.C 27703

UNAUTHORIZED PERSON WITHOUT

THE WRITTEN CONSENT

MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY

CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT

CONTAINED WITHIN ARE THE PROPRIETARY AND

CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

X° ± .5 °

.XXX ± .25

.XX ± .75

.X ± 1.5

FOR SHEET METAL PARTS ONLY

.XX ± .25

.XXX ± .125

X° ± .5 °

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN

MILLIMETERS AND AFTER FINISH.

TOLERANCE UNLESS SPECIFIED:

SURFACE FINISH:

1.6

Trailer

160mm (min) of

empty pockets

sealed with tape

(15 pockets min.)

Loaded Pockets

(1000 Lamps)

Leader

400mm (min.) of

empty pockets with

at least 100mm

sealed by tape

(40 empty pockets min.)

12

1.75

4

83.35

1/13.000

B

2402-00012

XM LOADING SPEC

--

----

06/08/10D. CRONIN

REVISONS

REV DESCRIPTION BY DATE APP'D

A Loaded pocket count was 750 DDS 11/8/10 BS

B MADE CATHODE AND ANODE NOTE LARGER DC 2/26/12

END START

User Feed Direction

CATHODE SIDE

ANODE SIDE

1

234

6 5

D

C

B

A

APP'DDATEBY

REVISIONS

REV DESCRIPTION

SIZE

TITLE

OF

REV.

SHEET

A

DRAWING NO.

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

SCALE

A

B

C

D

1

23456

4600 Silicon Drive

Fax (919) 313-5558

Durham, N.C 27703

Phone (919) 313-5300

UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT

MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY

CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT

CONTAINED WITHIN ARE THE PROPRIETARY AND

CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

X° ± .5 °

.XXX ± .010

.XX ± .03

.X ± .06

FOR SHEET METAL PARTS ONLY

.XX ± .01

.XXX ± .005

X° ± .5 °

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

AND AFTER FINISH.

TOLERANCE UNLESS SPECIFIED:

SURFACE FINISH:

63

1/1DRAWING SCALE

A

2402-00011

XM 5050 CARRIER TAPE

4/23/10 D. CRONIN

CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275

.36[.014]

T

5.40[.213]

Ao

3.35[.132]

Ko

3.0°

5.40[.213]

Bo

2.00[.079]

P2

4.00[.157]

Po

Do1.50 +.10

-.00 .0591 +.0039

-.0000 [ ]

10.25

[.404]

E2

7.0°

12.00[.472]

NOMINAL

12.30 [.484]

MAX

W

1.75[.069]

E1

5.50[.217]F

1.50[.059]

D1

8.00[.315]

P

POCKET SIZE

Ao - 5.40mm [.213"]

Bo - 5.40mm [.213"]

Ko - 3.35mm [.132"]

1

234

6 5

D

C

B

A

APP'DDATEBY

REVISIONS

REV DESCRIPTION

SIZE

TITLE

OF

REV.

SHEET

A

DRAWING NO.

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

SCALE

A

B

C

D

1

23456

4600 Silicon Drive

Fax (919) 313-5558

Durham, N.C 27703

Phone (919) 313-5300

UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT

MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY

CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT

CONTAINED WITHIN ARE THE PROPRIETARY AND

CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

X° ± .5 °

.XXX ± .010

.XX ± .03

.X ± .06

FOR SHEET METAL PARTS ONLY

.XX ± .01

.XXX ± .005

X° ± .5 °

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

AND AFTER FINISH.

TOLERANCE UNLESS SPECIFIED:

SURFACE FINISH:

63

1/1DRAWING SCALE

A

2402-00011

XM 5050 CARRIER TAPE

4/23/10 D. CRONIN

CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275

.36[.014]

T

5.40[.213]

Ao

3.35[.132]

Ko

3.0°

5.40[.213]

Bo

2.00[.079]

P2

4.00[.157]

Po

Do1.50 +.10

-.00 .0591 +.0039

-.0000 [ ]

10.25

[.404]

E2

7.0°

12.00[.472]

NOMINAL

12.30 [.484]

MAX

W

1.75[.069]

E1

5.50[.217]F

1.50[.059]

D1

8.00[.315]

P

POCKET SIZE

Ao - 5.40mm [.213"]

Bo - 5.40mm [.213"]

Ko - 3.35mm [.132"]

1

234

6 5

D

C

B

A

APP'DDATEBY

REVISIONS

REV DESCRIPTION

SIZE

TITLE

OF

REV.

SHEET

A

DRAWING NO.

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

SCALE

A

B

C

D

1

23456

4600 Silicon Drive

Fax (919) 313-5558

Durham, N.C 27703

Phone (919) 313-5300

UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT

MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY

CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT

CONTAINED WITHIN ARE THE PROPRIETARY AND

CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

X° ± .5 °

.XXX ± .010

.XX ± .03

.X ± .06

FOR SHEET METAL PARTS ONLY

.XX ± .01

.XXX ± .005

X° ± .5 °

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

AND AFTER FINISH.

TOLERANCE UNLESS SPECIFIED:

SURFACE FINISH:

63

1/1DRAWING SCALE

A

2402-00011

XM 5050 CARRIER TAPE

4/23/10 D. CRONIN

CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275

.36[.014]

T

5.40[.213]

Ao

3.35[.132]

Ko

3.0°

5.40[.213]

Bo

2.00[.079]

P2

4.00[.157]

Po

Do1.50 +.10

-.00 .0591 +.0039

-.0000 [ ]

10.25

[.404]

E2

7.0°

12.00[.472]

NOMINAL

12.30 [.484]

MAX

W

1.75[.069]

E1

5.50[.217]F

1.50[.059]

D1

8.00[.315]

P

POCKET SIZE

Ao - 5.40mm [.213"]

Bo - 5.40mm [.213"]

Ko - 3.35mm [.132"]

Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of

Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

14

XLamp® Xm-L LED

PACKAGING

Label with Cree Bin

Code, Qty, Lot # Label with Cree Bin

Code, Qty, Lot #

Vacuum-Sealed

Moisture Barrier Bag

Dessicant

(inside bag)

Humidity Indicator

Card (inside bag)

Patent Label

Label with Customer Order

Code, Qty, Reel ID, PO #

Patent Label

Label with Cree Bin Code,

Quantity, Reel ID

Label with Cree Bin Code,

Quantity, Reel ID

Label with Cree Order Code,

Quantity, Reel ID, PO #

Label with Cree Order Code,

Quantity, Reel ID, PO #

Label with Cree Bin Code,

Quantity, Reel ID

Unpackaged Reel

Packaged Reel

Boxed Reel

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Cree, Inc.:

XMLAWT-00-0000-0000T5051 XMLAWT-00-0000-0000T6051 XMLAWT-00-0000-000LS60F8 XMLAWT-00-0000-

000LT20E6 XMLAWT-00-0000-000LT20F6 XMLAWT-00-0000-000LT20F7 XMLAWT-00-0000-000LT20F8 XMLAWT-

00-0000-000LT30E5 XMLAWT-00-0000-000LT30E6 XMLAWT-00-0000-000LT30F5 XMLAWT-00-0000-000LT30F6

XMLAWT-00-0000-000LT30F7 XMLAWT-00-0000-000LT40E4 XMLAWT-00-0000-000LT40E5 XMLAWT-00-0000-

000LT40E6 XMLAWT-00-0000-000LT40F4 XMLAWT-00-0000-000LT40F5 XMLAWT-00-0000-000LT40F6 XMLAWT-

00-0000-000LT50E4 XMLAWT-00-0000-000LT50F4 XMLAWT-00-0000-000LT60E3 XMLAWT-02-0000-0000T5050

XMLAWT-02-0000-0000T5051 XMLAWT-02-0000-0000T5053 XMLAWT-02-0000-0000T6051 XMLAWT-02-0000-

0000T6053 XMLAWT-02-0000-000LS60E8 XMLAWT-02-0000-000LS60F8 XMLAWT-02-0000-000LT20E6 XMLAWT-

02-0000-000LT20E8 XMLAWT-02-0000-000LT20F6 XMLAWT-02-0000-000LT20F7 XMLAWT-02-0000-000LT20F8

XMLAWT-02-0000-000LT30E5 XMLAWT-02-0000-000LT30E6 XMLAWT-02-0000-000LT30E7 XMLAWT-02-0000-

000LT30F5 XMLAWT-02-0000-000LT30F6 XMLAWT-02-0000-000LT30F7 XMLAWT-02-0000-000LT40E3 XMLAWT-

02-0000-000LT40E5 XMLAWT-02-0000-000LT40E6 XMLAWT-02-0000-000LT40F4 XMLAWT-02-0000-000LT40F5

XMLAWT-02-0000-000LT40F6 XMLAWT-02-0000-000LT50E3 XMLAWT-02-0000-000LT50E4 XMLAWT-02-0000-

000LT50F4 XMLAWT-02-0000-000LT60E3 XMLAWT-00-0000-0000T5050 XMLAWT-00-0000-0000T5053 XMLAWT-

00-0000-0000T6053 XMLAWT-00-0000-000LS60E8 XMLAWT-00-0000-000LT20E7 XMLAWT-00-0000-000LT20E8

XMLAWT-00-0000-000LT30E7 XMLAWT-00-0000-000LT40E3 XMLAWT-00-0000-000LT50E3 XMLAWT-02-0000-

000LT20E7 XMLAWT-02-0000-000LT40E4 XMLAWT-00-0000-000HS60F8 XMLAWT-00-0000-000HT20E7

XMLAWT-00-0000-000HT20F6 XMLAWT-00-0000-000HT30F6 XMLAWT-00-0000-000HT30F7 XMLAWT-00-0000-

000HT40E5 XMLAWT-02-0000-000HT20F7 XMLAWT-02-0000-000HT20F8 XMLAWT-02-0000-000HT30F6

XMLAWT-02-0000-000HT40E5 XMLAWT-02-0000-000US30F8 XMLAWT-02-0000-000US30E8 XMLAWT-02-0000-

000US30Z8 XMLAWT-02-0000-000US40Z8 XMLAWT-02-0000-000US50E8 XMLAWT-02-0000-000LT20Z6

XMLAWT-02-0000-0000T60E2 XMLAWT-00-0000-000US30F8 XMLAWT-00-0000-000LT20Z8 XMLAWT-00-0000-

000LT50F5 XMLAWT-02-0000-000PS60E7 XMLAWT-00-0000-000HT30Z6 XMLAWT-00-0000-000HT20Z8

XMLAWT-02-0000-000US40E7 XMLAWT-02-0000-000HS60Z8 XMLAWT-02-0000-000HT20Z6 XMLAWT-02-0000-

000US40Z7 XMLAWT-02-0000-000PS40Z7 XMLAWT-00-0000-000PS50E7 XMLAWT-02-0000-000LT40Z5

XMLAWT-00-0000-000US50F8 XMLAWT-00-0000-000LT20Z6 XMLAWT-02-0000-000US40E8 XMLAWT-02-0000-

000PS50Z7 XMLAWT-02-0000-000LT20Z8 XMLAWT-00-0000-000PS40Z7 XMLAWT-02-0000-0000U20E1

XMLAWT-02-0000-000PS50F8 XMLAWT-00-0000-000PS40E8 XMLAWT-02-0000-000US40F8