CLD-DS33 Rev 11E Product family data sheet Cree(R) XLamp(R) XM-L LEDs Product Description FEATURES Table of Contents The XLamp(R) XM-L LED is the industry's * Maximum drive current: 3000 mA Characteristics........................................ 2 highest performance, singledie white * Low thermal resistance: 2.5 C/W Flux Characteristics................................ 3 lightingclass LED. The XLamp XM-L LED * Maximum junction temperature: Relative Spectral Power Distribution..... 4 150 C Relative Flux vs. Junction is 20% more efficient than the XLamp XP-G LED at the same current, and can * Viewing angle: 125 Temperature............................................ 4 deliver 1000 lumens with 100 lumens per * Available in cool white, 80CRI Electrical Characteristics........................ 5 watt efficacy. The XLamp XM-L LED offers minimum neutral white and 80CRI, Relative Flux vs. Current......................... 5 Cree's industry-leading features: wide 85CRI and 90CRI warm white Relative Chromaticity vs. Current (Cool viewing angle, symmetrical package, * ANSIcompatible chromaticity bins White)....................................................... 6 unlimited floor life and electrically neutral * Unlimited floor life at Relative Chromaticity vs. Temperature 30 C/85% RH (Cool White)............................................. 6 Reflow solderable - JEDEC Relative Chromaticity vs. Current JSTD020C (Warm White).......................................... 7 thermal path. * XLamp XM-L LEDs can enable LED light into new applications that require tens * Electrically neutral thermal path Relative Chromaticity vs. Temperature of thousands of lumens, such as high * RoHS and REACh compliant (Warm White).......................................... 7 bay and high-output area lighting. The * UL(R) recognized component Typical Spatial Distribution..................... 8 (E349212) Thermal Design....................................... 8 XM-L is also the ideal choice for lighting applications where high light output and Reflow Soldering Characteristics........... 9 maximum efficacy are required, such as Notes..................................................... 10 LED light bulbs, outdoor lighting, portable Mechanical Dimensions....................... 12 lighting, Tape and Reel........................................ 13 indoor www.cree.com/Xlamp powered lighting. lighting and solar- Packaging.............................................. 14 Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLamp (R) XM-L LED Characteristics Characteristics Unit Thermal resistance, junction to solder point C/W 2.5 degrees 125 mV/C -2.1 Viewing angle (FWHM) Temperature coefficient of voltage ESD withstand voltage (HBM per Mil-Std-883D) Minimum Typical Maximum V 8000 mA 3000 Reverse voltage V 5 Forward voltage (@ 700 mA) V 2.9 Forward voltage (@ 1500 mA) V 3.1 Forward voltage (@ 3000 mA) V 3.35 LED junction temperature C DC forward current 3.5 150 Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 2 XLamp (R) XM-L LED Flux Characteristics (TJ = 25 C) The following table provides several base order codes for XLamp XM-L LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the ordercode nomenclature, please consult the XLamp XM-L LED Binning and Labeling document. Color CCT Range Min. Cool White 5000 K Max. 8300 K Neutral White 3700 K 5000 K 80-CRI White 2600 K 4300 K Warm White 2600 K 3700 K 85-CRI White 90-CRI White 2600 K 2600 K 3200 K 3200 K Minimum Luminous Flux @ 700 mA Calculated Minimum Luminous Flux (lm)* Order Code Group Flux (lm) 1000 mA 1500 mA 2000 mA T5 260 360 511 643 XMLAWT-00-0000-0000T5051 T6 280 388 551 692 XMLAWT-00-0000-0000T6051 U2 300 416 590 742 XMLAWT-00-0000-0000U2051 T4 240 332 472 593 XMLAWT-00-0000-000LT40E4 T5 260 360 511 643 XMLAWT-00-0000-000LT50E4 T2 200 277 393 494 XMLAWT-00-0000-000HT20E7 T3 220 305 433 544 XMLAWT-00-0000-000HT30F7 T2 200 277 393 494 XMLAWT-00-0000-000LT20E7 T3 220 305 433 544 XMLAWT-00-0000-000LT30F7 S4 164 227 323 406 XMLAWT-00-0000-000PS40E7 S5 172 238 338 425 XMLAWT-00-0000-000PS50E7 S6 182 252 358 450 XMLAWT-00-0000-000PS60E7 S4 164 227 323 406 XMLAWT-00-0000-000US40E7 S5 172 238 338 425 XMLAWT-00-0000-000US50E7 S6 182 252 358 450 XMLAWT-00-0000-000US60E7 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 10). * Typical CRI for Cool White (5000 K - 8300 K CCT) is 65. * Typical CRI for Neutral White (3700 K - 5000 K CCT) is 75. * Typical CRI for Warm White (2600 K - 3700 K CCT) is 80. * Minimum CRI for 80-CRI White is 80. * Minimum CRI for 85-CRI White is 85. * Minimum CRI for 90-CRI White is 90 * Calculated flux values are for reference only. Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 3 XLamp (R) XM-L LED Relative Spectral Power Distribution Relative Radiant Power (%) 100 80 60 5000 K - 8300 K CCT 3700 K - 5000 K CCT 2600 K - 3700 K CCT 40 20 0 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux vs. Junction Temperature (IF = 700 mA) 100% 90% Relative Luminous Flux 80% 70% 60% 50% 40% 30% 20% 10% 0% 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 4 XLamp (R) XM-L LED Electrical Characteristics (Tj =(T25C) Electrical Characteristics = 25 C) J 3000 2800 2600 Forward Current (mA) 2400 2200 2000 1800 1600 1400 1200 1000 800 600 400 200 0 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 Forward Voltage (V) Relative Intensity vs. Current (Tj = 25C) Relative Flux vs. Current (TJ = 25 C) 350% 325% Relative Luminous Flux 300% 275% 250% 225% 200% 175% 150% 125% 100% 75% 50% 25% 0% 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 Forward Current (mA) Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 5 XLamp (R) XM-L LED Relative Chromaticity vs. Current (Cool White) Cool White 0.020 0.015 0.010 0.005 CCx 0.000 CCy -0.005 -0.010 -0.015 -0.020 0 500 1000 1500 2000 2500 3000 Current (mA) Relative Chromaticity vs. Temperature (Cool White) Cool White 0.020 0.015 0.010 0.005 CCx 0.000 CCy -0.005 -0.010 -0.015 -0.020 25 50 75 100 125 150 Tsp (C) Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 6 XLamp (R) XM-L LED Relative Chromaticity vs. Current (Warm White) Warm White 0.020 0.015 0.010 0.005 CCx 0.000 CCy -0.005 -0.010 -0.015 -0.020 0 500 1000 1500 2000 2500 3000 Current (mA) Warm White vs. Temperature (Warm White) Relative Chromaticity 0.020 0.015 0.010 0.005 CCx 0.000 CCy -0.005 -0.010 -0.015 -0.020 25 50 75 100 125 150 Tsp (C) Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 7 XLamp (R) XM-L LED Typical Spatial Distribution 100% Relative Luminous Intensity 80% 60% 40% 20% -100 -80 -60 -40 -20 0% 0 20 40 60 80 100 Angle () Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life Thermal Design and optical characteristics. 3500 Maximum Current (mA) 3000 2500 2000 1500 Rj-a = 4 C/W 1000 Rj-a = 7 C/W Rj-a = 10 C/W 500 Rj-a = 15 C/W 0 0 20 40 60 80 100 120 140 160 Ambient Temperature (C) Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 8 XLamp (R) XM-L LED Reflow Soldering Characteristics In testing, Cree has found XLamp XM-L LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25C to Peak Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Time Lead-Free Solder 1.2 C/second Preheat: Temperature Min (Tsmin) 120 C Preheat: Temperature Max (Tsmax) 170 C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) 217 C 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 C Time Within 5 C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 C/second Time 25 C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 9 XLamp (R) XM-L LED Notes Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree's control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. PreRelease Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree's pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree's lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XM-L LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of 30 C/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 10 XLamp (R) XM-L LED Notes - Continued UL(R) Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. Vision Advisory WARNING: Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 11 XLamp (R) XM-L LED Mechanical Dimensions 6 5 4 NOTICE 6 CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND NOTICE CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONTAINED WITHIN ARE THE PROPRIETARY AND UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT INFORMATION OF CREE, INC. THIS PLOT CONFIDENTIAL OF CREE INC. MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. 3 5 2 4 Thermal vias, if present, are not shown on these drawings. 1 REVISONS 3 REV DESCRIPTION A NEW RELEASE B Added die outline REV A B All measurements are .13 mm unless otherwise indicated. D 3.02 WAS 3.09 C ADDED DIMENSION FOR TOP OF FLASH E D D G CHANGED SOLDERPAD AND STENCIL .50 0.73 5.00 .50 4/15/10 10/22/1 DC 11/18/10 NE G CHANGED SOLD E 4.78 3.78 2.78 3.02 5.00 DC DDS F D CORRECTED DOME RADIUS DATE Ad 1/5/11 DC ADDED DIMENSI 10/23/1 DC 3. 11/15/1 DC ADDED 6/16/15 DC CORRECTE C ADDED DOME RADIUS F 4.78 3.78 3.02 2 BY 2.78 .50 0.73 .50 5.00 4.78 5.00 C C R2.26 Top View Side View Bottom View R2.26 4.78 4.78 .50 .50 .80 .50 .50 .50 .50 .80 .25 .25 .80 .80 B B 4.78 4.78 4.78 4.78 .25 .25 .97 2.78 4.78 2.78 Recommended PCB A RECOMMENDED STENCIL PATTERN (HATCHED Solder PadAREA IS OPENING) A RECOMMENDED PCB SOLDER PAD RECOMMENDED PCB SOLDER PAD .97 ALL DIMENSIONS ARE 4.78 .13MM UNLESS OTHERWISE NOTED ALL DIMENSIONS ARE Recommended Stencil Pattern (Shaded Area Is Open) DRAWN BY UNLESS OTHERWISE SPECIFIED D. CRONIN DIMENSIONS ARE IN RECOMMENDED STENCIL PATTERN CHECK MILLIMETERS AND AFTER FINISH. (HATCHED AREA IS OPENING) -TOLERANCE UNLESS SPECIFIED: .XX .25 APPROVED .XXX .125 -X .5 THIRD ANGLE PROJECTION MATERIAL FOR SHEET METAL PARTS ONLY .X 1.5 THIRD ANGLE PROJECTION .XX .75 .XXX .25 FINAL PROTECTIVE FINISH X .5 -- SURFACE FINISH: 6 5 6 4 5 -- 1.6 3 4 2 .13MM UNLES DATE 04/9/10 DRAWN BY DATE UNLESS OTHERWISE SPECIFIED -DIMENSIONS ARE IN DATE MILLIMETERS AND AFTER FINISH. TITLE TOLERANCE UNLESS SPECIFIED: -.XX .25 .XXX .125 X .5 D. CRONIN 460 Du Pho Fax CHECK -- OUTLINE DRAWING, 5050 SIZE C SURFACE FINISH: APPROVED -- DRAWING NO. FOR SHEET METAL PARTS ONLY .X 1.5 .XX .75 SCALE .XXX .25 16.000 X .5 1.6 3 MATERIAL 2610-0000 -- SHE FINAL PROTECTIVE FINISH 1 -2 Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 12 6 5 4 3 2.00[.079] 4.00[.157] 1 2 REVISIONS NOTICE EE CONFIDENTIAL. THIS PLOT AND THE INFORMATION NTAINED WITHIN ARE THE PROPRIETARY AND NFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT Y NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY AUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT CREE INC. DESCRIPTION REV BY DATE APP'D POCKET SIZE +.10 +.0039 .0591 -.00 -.0000 [ ] Do1.50 P2 1.75[.069] E1 Po Ao - 5.40mm [.213"] Bo - 5.40mm [.213"] Ko - 3.35mm [.132"] Tape and Reel 3.0 XLamp (R) XM-L LED D 5.40[.213] Bo 3 12.00[.472] Component Handling Systems Standard. All Cree carrier tapes conform to EIA-481D, Automated 6 5 4 5.50[.217]F 6 5 4 NOMINAL C NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION NOTICE CONTAINED WITHIN ARE THETHIS PROPRIETARY ANDINFORMATION CREE CONFIDENTIAL. PLOT AND THE CONFIDENTIAL INFORMATION CREE, INC. THIS PLOT CONTAINED WITHIN AREOF THE PROPRIETARY AND MAY NOT BE COPIED, INFORMATION REPRODUCEDOF ORCREE, DISCLOSED TO PLOT ANY CONFIDENTIAL INC. THIS UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY OF CREE INC. UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. D D REV 12.30 [.484] MAX W 10.25 [.404] E2 2.00[.079] 2.00[.079] P2 1.50[.059] 4.00[.157] D1 4.00[.157] Po 8.00[.315] P 2 3 REVISIONS REVISIONS DESCRIPTION DESCRIPTION 6 5 C NOTICE NTIAL. THIS PLOT AND THE INFORMATION THIN ARE THE PROPRIETARY AND INFORMATION OF CREE, INC. THIS PLOT OPIED, REPRODUCED OR DISCLOSED TO ANY D PERSON WITHOUTTHE WRITTEN CONSENT 5.40[.213] 4 3.0 A B Ao B UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX .01 .XXX .005 X .5 FOR SHEET METAL PARTS ONLY .X .06 .XX .03 .XXX .010 X .5 SURFACE FINISH: 5 4 8 6 1 C BY DATE DDS 11/8/10 DC 2/26/12 BS 8.00[.315] DATE 8.00[.315] P TITLE P APPROVED SIZE A Loaded Pockets (1000 Lamps) A FINAL PROTECTIVE FINISH User Feed Direction REV. DRAWING NO. 2402-00011 7.0 SCALE DRAWING SCALE 2 SHEET 7.0 1 A OF 4 1.75 3.35[.132] 3.35[.132] 3 Ko Ko START 12 .36[.014] D T .36[.014] T A XM 5050 CARRIER TAPE MATERIAL 5.40[.213] 5.40[.213] Ao ANODE SIDE 1.50[.059] Phone (919) 313-5300 Fax (919) 313-5558 D1 1.50[.059] D1 B 3.35 2 1 2400-00009 CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275 CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275 INDEX QTY ITEM 1 1 2400-00009-CORE DRAWN BY COMMENTS DATE UNLESS OTHERWISE SPECIFIED DATE 4/23/10 2 D. CRONIN 2DRAWN BY2400-00009-REEL UNLESS ARE OTHERWISE SPECIFIED DIMENSIONS IN INCHES D. CRONIN 4/23/10 DATE DIMENSIONS ARE IN INCHESCHECK AND AFTER FINISH. CHECK DATE AND AFTERSPECIFIED: FINISH. TOLERANCE UNLESS TOLERANCE .XX UNLESS .01 SPECIFIED: APPROVED DATE TITLE .XX .01 .XXX .005 APPROVED DATE TITLE X .XXX .5 .005 THIRD ANGLE PROJECTION MATERIAL X PARTS .5 FOR SHEET METAL ONLY Leader THIRD ANGLE PROJECTION MATERIAL FOR.XSHEET METAL .06 PARTS ONLY DRAWING NO. 400mm (min.) of SIZE .XX .X .03 .06 DRAWING NO. SIZE FINAL PROTECTIVE FINISH .03 empty pockets with .XXX .XX .010 FINAL PROTECTIVE FINISH X .XXX .5 .010 at least 100mm SCALE X .5 SURFACE FINISH: 63 SCALE sealed by tape DRAWING SCALE SURFACE FINISH: 63 DRAWING SCALE Ao C 4600 Silicon Drive Durham, N.C 27703 4600 Silicon Drive Durham, N.C 27703 Phone (919) 313-5300 Phone (919) 313-5300 Fax (919) 313-5558 Fax (919) 313-5558 XMXM 5050 CARRIER TAPE 5050 CARRIER TAPE 2402-00011 A 2402-00011 A 6 (405 empty pockets min.) 4 5 3 4 2 3 A REV. A 6 SHEET OF SHEET 1 2 1OF / 1 1 D REV. A 1 /1 12.4 +.2 .0 MEASURED AT HUB C C 330 +.25 -.75 16.4 +0.2 .0 MEASURED AT HUB THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX .25 .XXX .125 X .5 FOR SHEET METAL PARTS ONLY .X 1.5 .XX .75 .XXX .25 X .5 SURFACE FINISH: 5 4 1.6 3 1.9.4 DATE DRAWN BY D. CRONIN CHECK 21 .4 4600 Silicon Drive Durham, N.C 27703 06/08/10 DATE -- Phone (919) 313-5300 -- Fax (919) 313-5558 A DATE APPROVED -- -- MATERIAL TITLE 13.1 .2 -- SIZE FINAL PROTECTIVE FINISH -- SCALE XM LOADING SPEC REV. DRAWING NO. C 2402-00012 SHEET 3.000 2 B OF B 1 /1 1 12.4 +1.0 -.5 MEASURED AT EDGE 60 60 REVISONS REV DESCRIPTION BY DATE APP'D Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. UNLESS OTHERWISE SPECIFIED DRAWN BY A THIRD ANGLE PROJECTION B 1 /1 B B C APP'D 4600 Silicon Drive Durham, N.C 27703 4/23/10 DATE CATHODE SIDE 4 5 Trailer 160mm (min) of empty pockets sealed with tape (15 pockets min.) D. CRONIN CHECK 3 A 6 D DATE DRAWN BY 63 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTANED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. D D CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275 B END 2 APP'D DATE APP'D 5.40[.213] 5.40[.213] Bo Bo 3.0 12.00[.472] 12.00[.472] NOMINAL NOMINAL REVISONS [.484] 10.25 12.30DESCRIPTION 12.30 [.484] MAX Loaded pocket count was 750 [.404]10.25 MAX [.404] WANODE E2 MADE CATHODE AND W NOTE LARGER E2 REV 3.35[.132] Ko THIRD ANGLE PROJECTION 6 5.50[.217]F 5.50[.217]F 3 C BY DATE BoBo - - 5.40mm [.213"] 5.40mm [.213"] KoKo - - 3.35mm [.132"] 3.35mm [.132"] B 7.0 BY POCKET SIZE POCKET SIZE AoAo - - 5.40mm [.213"] 5.40mm [.213"] 1.75[.069] E1 1.75[.069] E1 .36[.014] T Po 1 All dimensions in mm. REV +.10 +.0039 Do1.50 .0591 +.0039 -.00 +.10 .0591 -.0000 [] Do1.50 -.00 -.0000 [ ] P2 1 2 DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX .01 .XXX .005 X .5 FOR SHEET METAL PARTS ONLY D. CRONIN CHECK DATE 4600 Silicon Drive Durham, N.C 27703 09/29/09 13 DATE -APPROVED -MATERIAL Phone (919) 313-5300 -- Fax (919) 313-5558 DATE -- TITLE REEL, 13" X 12MM, 3 PIECE SNAP A A XLamp (R) XM-L LED Packaging Humidity Indicator Card (inside bag) Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Quantity, Reel ID Packaged Reel Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Label with Custo Code, Qty, Reel I Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Patent Label Label with Cree Bin Code, Quantity, Reel ID Patent Label Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 14 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cree, Inc.: XMLAWT-00-0000-0000T5051 XMLAWT-00-0000-0000T6051 XMLAWT-00-0000-000LS60F8 XMLAWT-00-0000000LT20E6 XMLAWT-00-0000-000LT20F6 XMLAWT-00-0000-000LT20F7 XMLAWT-00-0000-000LT20F8 XMLAWT00-0000-000LT30E5 XMLAWT-00-0000-000LT30E6 XMLAWT-00-0000-000LT30F5 XMLAWT-00-0000-000LT30F6 XMLAWT-00-0000-000LT30F7 XMLAWT-00-0000-000LT40E4 XMLAWT-00-0000-000LT40E5 XMLAWT-00-0000000LT40E6 XMLAWT-00-0000-000LT40F4 XMLAWT-00-0000-000LT40F5 XMLAWT-00-0000-000LT40F6 XMLAWT00-0000-000LT50E4 XMLAWT-00-0000-000LT50F4 XMLAWT-00-0000-000LT60E3 XMLAWT-02-0000-0000T5050 XMLAWT-02-0000-0000T5051 XMLAWT-02-0000-0000T5053 XMLAWT-02-0000-0000T6051 XMLAWT-02-00000000T6053 XMLAWT-02-0000-000LS60E8 XMLAWT-02-0000-000LS60F8 XMLAWT-02-0000-000LT20E6 XMLAWT02-0000-000LT20E8 XMLAWT-02-0000-000LT20F6 XMLAWT-02-0000-000LT20F7 XMLAWT-02-0000-000LT20F8 XMLAWT-02-0000-000LT30E5 XMLAWT-02-0000-000LT30E6 XMLAWT-02-0000-000LT30E7 XMLAWT-02-0000000LT30F5 XMLAWT-02-0000-000LT30F6 XMLAWT-02-0000-000LT30F7 XMLAWT-02-0000-000LT40E3 XMLAWT02-0000-000LT40E5 XMLAWT-02-0000-000LT40E6 XMLAWT-02-0000-000LT40F4 XMLAWT-02-0000-000LT40F5 XMLAWT-02-0000-000LT40F6 XMLAWT-02-0000-000LT50E3 XMLAWT-02-0000-000LT50E4 XMLAWT-02-0000000LT50F4 XMLAWT-02-0000-000LT60E3 XMLAWT-00-0000-0000T5050 XMLAWT-00-0000-0000T5053 XMLAWT00-0000-0000T6053 XMLAWT-00-0000-000LS60E8 XMLAWT-00-0000-000LT20E7 XMLAWT-00-0000-000LT20E8 XMLAWT-00-0000-000LT30E7 XMLAWT-00-0000-000LT40E3 XMLAWT-00-0000-000LT50E3 XMLAWT-02-0000000LT20E7 XMLAWT-02-0000-000LT40E4 XMLAWT-00-0000-000HS60F8 XMLAWT-00-0000-000HT20E7 XMLAWT-00-0000-000HT20F6 XMLAWT-00-0000-000HT30F6 XMLAWT-00-0000-000HT30F7 XMLAWT-00-0000000HT40E5 XMLAWT-02-0000-000HT20F7 XMLAWT-02-0000-000HT20F8 XMLAWT-02-0000-000HT30F6 XMLAWT-02-0000-000HT40E5 XMLAWT-02-0000-000US30F8 XMLAWT-02-0000-000US30E8 XMLAWT-02-0000000US30Z8 XMLAWT-02-0000-000US40Z8 XMLAWT-02-0000-000US50E8 XMLAWT-02-0000-000LT20Z6 XMLAWT-02-0000-0000T60E2 XMLAWT-00-0000-000US30F8 XMLAWT-00-0000-000LT20Z8 XMLAWT-00-0000000LT50F5 XMLAWT-02-0000-000PS60E7 XMLAWT-00-0000-000HT30Z6 XMLAWT-00-0000-000HT20Z8 XMLAWT-02-0000-000US40E7 XMLAWT-02-0000-000HS60Z8 XMLAWT-02-0000-000HT20Z6 XMLAWT-02-0000000US40Z7 XMLAWT-02-0000-000PS40Z7 XMLAWT-00-0000-000PS50E7 XMLAWT-02-0000-000LT40Z5 XMLAWT-00-0000-000US50F8 XMLAWT-00-0000-000LT20Z6 XMLAWT-02-0000-000US40E8 XMLAWT-02-0000000PS50Z7 XMLAWT-02-0000-000LT20Z8 XMLAWT-00-0000-000PS40Z7 XMLAWT-02-0000-0000U20E1 XMLAWT-02-0000-000PS50F8 XMLAWT-00-0000-000PS40E8 XMLAWT-02-0000-000US40F8