EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 1206 Package Chip LED 15-21SURC/S530-XX/TR8 Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment.Compatible with infrared and vapor phase reflow solder process. Mono-color type. Descriptions The 15-21 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Chip Material Emitted Color AlGaInP Hyper Red Lens Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.1 Page: 1 of 9 Device No: DSE-151-065 Prepared date: 07-01-2003 Prepared by: Jessica Chang EVERLIGHT ELECTRONICS CO.,LTD. 15-21SURC/S530-XX/TR8 Package Outline Dimensions Notes: Tolerances Unless Dimension 0.1mm, Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.1 Page: 2 of 9 Device No: DSE-151-065 Prepared date: 07-01-2003 Prepared by: Jessica Chang EVERLIGHT ELECTRONICS CO.,LTD. 15-21SURC/S530-XX/TR8 Absolute Maximum Ratings (Ta=25 ) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40~ +90 Soldering Temperature Tsol Electrostatic Discharge ESD 2000 V Power Dissipation Pd 60 mW IF (PEAK) 60 mA Peak Forward Current (Duty 1/10 @1KHz) 260 (for 5 second) Electro-Optical Characteristics (Ta=25 ) Parameter Symbol *Chip Rank Min. Typ. Max. 15 36 49 60 72 --------- 38 54 74 92 111 140 632 ----------------------------- Unit Condition mcd IF=20 mA deg IF=20mA nm IF=20mA Luminous Intensity Iv Viewing Angle 21/2 Peak Wavelength p A2 A3 A4 A5 A6 --------- d ----- ----- 624 ----- nm IF=20mA Spectrum Radiation Bandwidth ----- ----- 20 ----- nm IF=20mA Forward Voltage VF ----- ----- 2.0 2.4 V IF=20mA Reverse Current IR ----- ----- ----- 10 A VR=5V Dominant Wavelength *15-21SURC/S530-XX/TR8 Chip Rank Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.1 Page: 3 of 9 Device No: DSE-151-065 Prepared date: 07-01-2003 Prepared by: Jessica Chang EVERLIGHT ELECTRONICS CO.,LTD. 15-21SURC/S530-XX/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.1 Page: 4 of 9 Device No: DSE-151-065 Prepared date: 07-01-2003 Prepared by: Jessica Chang EVERLIGHT ELECTRONICS CO.,LTD. 15-21SURC/S530-XX/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: Tolerances Unless Dimension 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.1 Page: 5 of 9 Device No: DSE-151-065 Prepared date: 07-01-2003 Prepared by: Jessica Chang EVERLIGHT ELECTRONICS CO.,LTD. 15-21SURC/S530-XX/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: Tolerances Unless Dimension 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moistue-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.1 Page: 6 of 9 Device No: DSE-151-065 Prepared date: 07-01-2003 Prepared by: Jessica Chang EVERLIGHT ELECTRONICS CO.,LTD. 15-21SURC/S530-XX/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. Items Test Condition 1 Reflow Soldering Temp. : 240 5 5 sec. Test Sample Ac/Re Hours/Cycles Size 22 Pcs. 0/1 Temperature Cycle H : +100 15min 5 min L : -40 15min 300 Cycles 22 PCS. 0/1 3 Thermal Shock H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -55 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/RH85% 1000 Hrs. 22 PCS. 0/1 2 6 Min. Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.1 Page: 7 of 9 Device No: DSE-151-065 Prepared date: 07-01-2003 Prepared by: Jessica Chang EVERLIGHT ELECTRONICS CO.,LTD. 15-21SURC/S530-XX/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60 5 for 24 hours. 3. Soldering Condition 3.1 Lead solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 Reflow soldering should not be done more than two times. 3.4 When soldering, do not put stress on the LEDs during heating. 3.5 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.1 Page: 8 of 9 Device No: DSE-151-065 Prepared date: 07-01-2003 Prepared by: Jessica Chang EVERLIGHT ELECTRONICS CO.,LTD. 15-21SURC/S530-XX/TR8 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.1 Page: 9 of 9 Device No: DSE-151-065 Prepared date: 07-01-2003 Prepared by: Jessica Chang