1N5820 - 1N5822 and 1N6864 Available on commercial versions 3 Amp Axial Schottky Barrier Rectifiers Qualified per MIL-PRF-19500/620 Qualified Levels*: JAN, JANTX, JANTXV and JANS DESCRIPTION This series of 3 amp Schottky rectifiers in their axial-leaded "B" packaging offer flexible thruhole mounting. The 1N5822 and 1N6864 are military qualified for high-reliability applications. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES * * * * * * JEDEC registered 1N5820 - 1N5822 and 1N6864 numbers. Hermetically sealed. Metallurgically bonded. Double plug construction. *JAN, JANTX, JANTXV and JANS qualifications are available per MIL-PRF-19500/620 for 1N6822 and 1N6864 only. (See Part Nomenclature for all available options.) RoHS compliant devices available (commercial grade only). Also available in: APPLICATIONS / BENEFITS * * "B" Package "B" MELF Package Flexible axial leads for thru-hole mounting (see package illustration). Non-sensitive to ESD per MIL-STD-750 method 1020. (surface mount) 1N5820US - 1N5822US, 1N6864US o MAXIMUM RATINGS @ T A = +25 C unless otherwise noted. Parameters/Test Conditions Junction Temperature Storage Temperature Thermal Resistance Junction-to-Lead @ .375 inch (9.52 mm) lead length o Surge Peak Forward Current @ T A = +25 C (Test pulse = 8.3 ms, half-sine wave.) o (1) Average Rectified Output Current @ T L = +55 C Symbol Value TJ T STG R JL -65 to +125 -65 to +150 30 Unit C C o C/W I FSM 80 A IO 3 A o o NOTES: 1. See Figures 3 and 4 for derating curves and for effects of V R on T J . The maximum T J depends on the voltage applied. MSC - Lawrence 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 Tel: (978) 620-2600 Fax: (978) 689-0803 MSC - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com T4-LDS-0303, Rev. 1 (6/14/13) (c)2013 Microsemi Corporation Page 1 of 8 1N5820 - 1N5822 and 1N6864 MECHANICAL and PACKAGING * * * * * * * CASE: Hermetically sealed voidless hard glass with tungsten slugs. TERMINALS: Tin/lead or RoHS compliant matte/tin on commercial grade only (no JAN levels) over nickel plate over copper. MARKING: Body coated in blue with part number. POLARITY: Cathode indicated by band. TAPE & REEL option: Standard per EIA-296. Consult factory for quantities. WEIGHT: Approximately 750 milligrams. See Package Dimensions on last page. PART NOMENCLATURE 1N5820 - 1N5821 1N5820 (e3) JEDEC type number See Electrical Characteristics table RoHS Compliance e3 = RoHS compliant Blank = non-RoHS compliant 1N5822 and 1N6864 only: JAN 1N5822 (e3) Reliability Level JAN = JAN Level JANTX = JANTX Level JANTXV = JANTXV Level JANS = JANS Level Blank = Commercial f IR IO JEDEC type number (See Electrical Characteristics table) SYMBOLS & DEFINITIONS Definition Symbol CT RoHS Compliance e3 = RoHS compliant (available on commercial grade only) Blank = non-RoHS compliant Capacitance: The capacitance in pF at a frequency of 1 MHz and specified voltage. frequency Maximum Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature. Average Rectified Output Current: The output current averaged over a full cycle with a 50 Hz or 60 Hz sine-wave input and a 180 degree conduction angle. VF Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current. VR Reverse Voltage: The dc voltage applied in the reverse direction below the breakdown region. Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating temperature range. V RWM T4-LDS-0303, Rev. 1 (6/14/13) (c)2013 Microsemi Corporation Page 2 of 8 1N5820 - 1N5822 and 1N6864 o ELECTRICAL CHARACTERISTICS @ 25 C unless otherwise noted. TYPE NUMBER WORKING PEAK REVERSE VOLTAGE 1N5820 1N5821 1N5822 1N6864 T4-LDS-0303, Rev. 1 (6/14/13) V RWM V (pk) 20 30 40 80 MAXIMUM FORWARD VOLTAGE MAXIMUM FORWARD VOLTAGE MAXIMUM FORWARD VOLTAGE V FM1 I FM = 1.0 A Volts 0.40 0.40 0.40 0.50 V FM2 I FM = 3.0 A Volts 0.50 0.50 0.50 0.70 V FM3 I FM = 9.4 A Volts 0.70 0.70 0.70 N/A (c)2013 Microsemi Corporation MAXIMUM REVERSE LEAKAGE CURRENT I RM @ V RM T J = +25 C mA 0.10 @ 20 V 0.10 @ 30 V 0.10 @ 40 V 0.15 @ 80 V T J = +100 C mA 12.5 @ 20 V 12.5 @ 30 V 12.5 @ 40 V 18.0 @ 80 V Page 3 of 8 1N5820 - 1N5822 and 1N6864 IR, Reverse Current (mA) GRAPHS T J , Junction Temperature (C) IF, Forward Current, Instantaneous (Amps) FIGURE 1 Typical Reverse Leakage Current at Rated PIV (PULSED) V F , Forward Voltage, Instantaneous (Volts) FIGURE 2 Typical Forward Voltage T4-LDS-0303, Rev. 1 (6/14/13) (c)2013 Microsemi Corporation Page 4 of 8 1N5820 - 1N5822 and 1N6864 Sinewave Operation Maximum Io Rating (A) GRAPHS (continued) Sinewave Operation Maximum Io Rating (A) T L , (C) (Lead=3/8") FIGURE 3 Temperature current derating for 1N5822 T L , (C) (Lead=3/8") FIGURE 4 Temperature current derating for 1N6864 T4-LDS-0303, Rev. 1 (6/14/13) (c)2013 Microsemi Corporation Page 5 of 8 1N5820 - 1N5822 and 1N6864 IF(A) GRAPHS (continued) IF (A) V F (V) FIGURE 5 Schottky V F - I F Characteristics (Typical 1N5822) V F (V) FIGURE 6 Schottky V F - I F Characteristics (Typical 1N6864) T4-LDS-0303, Rev. 1 (6/14/13) (c)2013 Microsemi Corporation Page 6 of 8 1N5820 - 1N5822 and 1N6864 Thermal Resistance (C/W) GRAPHS (continued) 2 Pad Area per Pad (in ) FIGURE 7 Thermal resistance vs FR4 Pad Area Still Air with the PCB horizontal (At lead length = 0.187 inch) T4-LDS-0303, Rev. 1 (6/14/13) (c)2013 Microsemi Corporation Page 7 of 8 1N5820 - 1N5822 and 1N6864 PACKAGE DIMENSIONS NOTES: 1. Dimensions are in inches. 2. Millimeters are given for information only. 3. Dimension BL shall include the entire body including slugs and sections of the lead over which the diameter is uncontrolled. This uncontrolled area is defined as the zone between the edge of the diode body and extending .050 inch (1.27 mm) onto the leads. 4. Dimension BD shall be measured at the largest diameter. 5. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. Ltr BD BL LD LL DIMENSIONS INCH MILLIMETERS Min Max Min Max 0.115 0.142 2.92 3.61 0.130 0.300 3.30 7.62 0.036 0.042 0.91 1.07 0.900 1.30 22.86 33.02 Notes 4 3 3 Lead Tolerance = +.002 - .003 in. (Includes sections of the lead or fillet over which the lead diameter is uncontrolled.) T4-LDS-0303, Rev. 1 (6/14/13) (c)2013 Microsemi Corporation Page 8 of 8