SPEC NO: DSAD1636 REV NO: V.7 DATE: MAY/25/2007 PAGE: 1 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1102005303
SUBMINIATURE SOLID STATE LAMP
Part Number: AM2520EF/4ID
High Efficiency Red
Features
z BLACK CASE ENHANCES CONTRAST.
z VIBRATION AND SHOCK RESISTANT.
z AVAILABLE WITH A VARITY OF LEDs.
z UL RATING : 94V-0.
z HOUSING MATERIAL: TYPE 66 NYLON.
z RoHS COMPLIANT.
Description
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAD1636 REV NO: V.7 DATE: MAY/25/2007 PAGE: 2 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1102005303
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
AM2520EF/4ID High Efficiency Red (GaAsP/GaP) RED DIFFUSED 7 30 40°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength High Efficiency Red 627 nm IF=20mA
λD [1] Dominant Wavelength High Efficiency Red 625 nm IF=20mA
Δλ1/2 Spectral Line Half-width High Efficiency Red 45 nm IF=20mA
C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage High Efficiency Red 2 2.5 V IF=20mA
IR Reverse Current High Efficiency Red 10 uA VR = 5V
Parameter High Efficiency Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 160 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds
SPEC NO: DSAD1636 REV NO: V.7 DATE: MAY/25/2007 PAGE: 3 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1102005303
High Efficiency Red AM2520EF/4ID
SPEC NO: DSAD1636 REV NO: V.7 DATE: MAY/25/2007 PAGE: 4 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1102005303
PACKING & LABEL SPECIFICATIONS AM2520EF/4ID