RS2AA - RS2MA CREAT BY ART 1.5 AMP. Surface Mount Fast Recovery Rectifiers SMA/DO-214AC Features For surface mounted application Glass passivated junction chip Built-in strain relief, ideal for automated placement Plastic material used carries Underwriters Laboratory Classification 94V-0 Fast switching for high efficiency High temperature soldering: 260 / 10 seconds at terminals Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Case: Molded plastic Terminals: Pure tin plated, Lead free Polarity: Indicated by cathode band Packing: 12mm tape per EIA STD RS-481 Weight: 0.064 grams Ordering Information (example) Part No. Package Packing Packing code Packing code (Green) RS2AA SMA 1.8K / 7" REEL R3 R3G Maximum Ratings and Electrical Characteristics Rating at 25 ambient temperature unless otherwise specified. Maximum Repetitive Peak Reverse Voltage VRRM RS 2AA 50 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current IF(AV) 1.5 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) IFSM 50 A VF 1.3 V Parameter Symbol Maximum Instantaneous Forward Voltage (Note 1) @ 1.5 A Maximum Reverse Current @ Rated VR TA=25 TA=125 RS 2BA 100 RS 2DA 200 RS 2GA 400 RS 2JA 600 RS 2KA 800 RS 2MA 1000 Unit V 5 IR uA 200 Maximum Reverse Recovery Time (Note 2) Trr Typical Junction Capacitance (Note 3) Cj 50 RjA RjL 55 18 TJ - 55 to + 150 O C - 55 to + 150 O C Typical Thermal Resistance Operating Temperature Range Storage Temperature Range TSTG 150 250 500 nS pF O C/W Note 1: Pulse Test with PW=300 usec, 1% Duty Cycle Note 2: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Note 3: Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Version:F13 RATINGS AND CHARACTERISTIC CURVES (RS2AA THRU RS2MA) FIG. 2 TYPICAL REVERSE CHARACTERISTICS FIG.1 FORWARD CURRENT DERATING CURVE 100 1.5 1 0.5 RESISTIVE OR INDUCTIVE LOAD 0 0 25 50 75 100 125 150 175 PEAK FORWARD SURGE CURRENT (A) LEAD TEMPERATURE (oC) FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 50 INSTANTANEOUS REVERSE CURRENT (uA) AVERAGE FORWARD CURRENT (A) 2 TA=125 10 1 TA=25 0.1 0 8.3mS Single Half Sine Wave JEDEC Method 40 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) TA=25 30 20 FIG. 5 TYPICAL FORWARD CHARACTERISTICS 10 100 Pulse Width=300us 1% Duty Cycle 0 1 10 100 INSTANTANEOUS FORWARD CURRENT (A) NUMBER OF CYCLES AT 60 Hz FIG. 4 TYPICAL JUNCTION CAPACITANCE 100 CAPACITANCE (pF) TA=25 f=1.0MHz Vsig=50mVp-p 10 TA=25 1 0.1 10 1 10 REVERSE VOLTAGE (V) 100 0.4 0.6 0.8 1 1.2 1.4 1.6 FORWARD VOLTAGE (V) Version:F13 1.8 Ordering information Package Packing Packing code Packing code (Green) SMA 1.8K / 7" REEL R3 R3G SMA 7.5K / 13" REEL R2 R2G SMA 7.5K / 13" Plastic REEL M2 M2G Folded SMA 1.8K / 7" REEL F3 F3G Folded SMA 7.5K / 13" REEL F2 F2G Folded SMA 7.5K / 13" Plastic REEL F4 F4G C SMA 1.8K / 7" REEL E3 E3G 7.5K / 13" REEL C SMA Note: "x" is Device Code from "A" thru "M". E2 E2G Part No. RS2XA (Note) Tape & Reel specification Reel Size Tape Size 7" 12mm Reel Size Tape Size 13" 12mm A 2.0 178 A max 330 B 0.4 1.9 B 0.5 2 C +0.5;-0.2 13 C 0.5 13 D min 21 D min 20.2 N 1.0 62 N 0.5 75 G +0.8;-0 12.2 G +2.0;-0 12.4 T max 14.6 T max 18.4 Unit (mm) Version:F13 Suggested PAD Layout Symbol A B C D E Unit(mm) 1.78 1.51 3.92 2.41 4.43 Package Outline Dimensions DIM. Unit(mm) Unit(inch) Min Max Min Max A 1.27 1.58 0.050 0.062 B 2.29 2.83 0.090 0.111 C 4.06 4.60 0.160 0.181 D 1.99 2.50 0.078 0.098 E 0.90 1.41 0.035 0.056 F 0.15 0.31 0.006 0.012 G 0.10 0.20 0.004 0.008 H 4.95 5.33 0.195 0.210 Marking Diagram P/N = Specific Device Code G= Green Compound YW = Date Code F= Factory Code Version:F13