Type: PKZM01-2,5 Article No.: 278481 Ordering information Motor rating AC-3 220 V 230 V 240 V P kW 0.37 Motor rating AC-3 380 V 400 V 415 V P kW 0.75 Motor rating AC-3 440 V P kW 1.1 Motor rating AC-3 500 V P kW 1.1 Motor rating AC-3 690 V P kW 1.5 Rated uninterrupted current Iu A 2.5 Overload release, min. - Overload release, max. Ir A 1,6 - 2,5 Irm A 35 max. Notes concerning the product group Accessories Page 3 Standard auxiliary contact 072896 5 Trip-indicating auxiliary contact 072898 1 6 Shunt release, undervoltage release 073187 Single-phasing sensitivity to IEC/EN 60947-4-1 Can be snap-fitted to IEC/EN 60715 top-hat rail with 7.5 or 15 mm height. General Standards IEC/EN 60947, VDE 0660, UL 508, CSA C 22.2 No. 14 Climatic proofing Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Storage C -25/80 Open C -25/55 Enclosed C -25/40 Direction of incoming supply As required Degree of protection Device IP20 Terminations IP00 Protection against direct contact Finger- and back-of-hand proof Mechanical shock resistance half-sinusoidal shock 10 ms to IEC 60068-2-27 g 25 Altitude m 2000 Terminal capacities Solid mm2 1 x (1 - 6) 2 x (1 - 6) Flexible with ferrule to DIN 46228 mm2 1 x (1 - 6) 2 x (1 - 6) Solid or stranded AWG 18 - 10 Specified tightening torque for terminal screws Main cable Nm 1,7 Control circuit cables Nm 1 Main conducting paths Rated impulse withstand voltage Uimp V AC Ue V AC Iu = Ie A 16 or current setting of the overcurrent release Hz 40 - 60 Overvoltage category/pollution degree Rated operational voltage Rated uninterrupted current = rated operational current 6000 III/3 Rated frequency Current heat loss (3-pole at operating temperature) W 690 6 Lifespan, mechanical Operations x 106 > 0,05 Lifespan, electrical (AC-3 at 400 V) Operations x 106 0,05 Ops/h 25 kA 60 Maximum operating frequency Max. operating frequency Short-circuit rating DC Short-circuit rating Short-circuit rating Motor switching capacity 2 60 AC-3 up to 690 V A 16 DC-5 (up to 250 V) A 16 (3 contacts in series) Trip blocks Temperature compensation to IEC/EN 60 947, VDE 0660 C -5 - 40 Operating range C -25 - 55 Temperature compensation residual error for T > 20 C %/K f 0.25 Setting range of overload releases x Iu 0,6 - 1 Short-circuit release fixed x Iu 14 % 20 Short-circuit release tolerance Phase-failure sensitivity Dimensions Mounting position Mounting position Dimensions 3 IEC/EN 60947-4-1, VDE 0660 Part 102 Moeller GmbH, Hein-Moeller-Str. 7-11, D-53115 Bonn E-Mail: catalog@moeller.net, Internet: www.moeller.net, http://catalog.moeller.net Copyright 2005 by Moeller GmbH. Subject to modifications. HPL-C2005GB-INT V3.0 4