Branche Connecteurs Offshore 9316 series Underwater applications Explosion proof Hermetically sealed 9316 Summary 1 Introduction 2 Presentation 3 Technical characteristics 4 Synopsis 5 Part-numbering system 6-7 Arrangements 7 Mechanical keyway 8 Hermetic receptacles 9 Plugs 9-10 Protective caps 11 Accessories 12 Mating and unmating dimensions - Mounting style 13 Thermo-shrink sleeves - Gaskets 14-15 Contacts and tooling 9316 Introduction General points The DEUTSCH 9316 series has been designed to withstand the most severe environments in marine and offshore applications down to 1500 or 7500 metres underwater. A special care was taken concerning : Easy handling, Mechanical stress, Use in polluted environments. Use in hazardous areas. We have particulary studied the mechanical strength, the elastomers selection and the suitability of the accessories for the most commonly used cables. To guarantee the quality of these products, DEUTSCH is equiped with conventional and special testing facilities dedicated to : Mechanical resistance, Ageing, Helium test, High pressure test. Also, a specialized team is at customers disposal to study and achieve the wiring and testing of the 9316 connectors in our facilities or on site. This series benefits from advanced technologies in glass to metal sealing and resistance to high pressures. The 9316 series cover most requirements for on board or underwater use : Signal, control High frequency, Medium and high power. Application The 9316 connectors have been designed for signal or power links down to 7500 meters and in explosive environments. They are available in the following types : Hermetically sealed receptacles and feedthrues, Explosion-proof (as per EN 50014). Waterproof, 150 bars (2175 psi) - 9316 series, (hermetic receptacles only) Waterproof, 750 bars (10875 psi) - 9306 series, (Consult us) Typical applications Underwater control systems, Wellheads Submarines, ROV, Platforms, Loading buoys, Mines. 1 Presentation 9316 Design features The shells are made of stainless steel. The coupling rings are made of marine bronze. In all cases, connectors in the 9316 series are scoop-proof ; a keying system is available in each size. The inserts include one part in thermo-setting plastic, and two parts in rubber silicone. Contacts are crimp type (except for hermetic connectors and some power arrangements). Hermetic receptacles and feedthrues are fitted whith ferro-nickel contacts sealed into a glass disc. They are plated with gold over nickel. The hermetic connectors withstand the pressure given in both directions (safety factor : 2P). Sealing of all hermetic connectors is tested by heli-test. Explosion-Proof connectors The 9316 series (see shell types certified pages 4 and 5) meet the requirements of the relevant European standard EN 50014, EN 50018 and have received the following agreement : L.C.I.E. certificate n 98.E0009 U. Protection mode : Explosion-Proof envelope (EN 50018), Gas group : Groupe II B, Temperature class : T6 (layout 121-901, see note page 7). 1 2 3 4 5 6 2 Coupling ring to be tightened with a spanner, Anti-friction washer allowing a constant coupling torque, Plug/receptacle sealing granted by o'ring and anti-extrusion gasket, Shell keying system, Anti-rotation system with teeth at the rear of the plug, allowing a secure tightening and clamping of the accessories, Rotation blocking screws after mating 9316 Technical characteristics Mechanical Shell Coupling ring Insert (plug/in line receptacle) Insert (hermetic receptacle) Contact (plug/in line receptacle) Contact (hermetic receptacle) Protection Endurance Contact retention force Hermeticity : Stainless steel AISI 316 L passivated : Marine bronze UA9 NFE-C 321 : Thermo-setting resin, silicone elastomer These inserts meet requirements of MIL-H 5606 : Glass : Crimp type # 20, 16, 12 and coax : rear insertion and front extraction Crimp type and solder type size 8 Crimp, solder or terminal type size 6, 4, 0, 150 mm2, 300 mm2 : Iron nickel (or copper, mode A810), solder or terminal (size 0, 150 mm2) : Gold over nickel : 500 mating and unmating cycles : After 10 insertion and extraction operations : Size 20 : 7 daN mini Size 16, 12, 8 : 11,2 daN mini 3 : Individual heli-test ; leakage inferior to 0,28 mm /hour at 1 bar differential pressure Climatics Working temperature Electrical Dielectric withstanding voltage At sea level Insulation resistance Maximum current rating per contact : Standard connectors : -55 C to + 125 C +100C warming considered) Explosion proof connectors : -20C -55 Ctoto + 85(connector C Explosion proof connectors HT : -20C to +190C (connector warming considered) : Service 1 : 1500 V A.C. Service 2 : 2300 V A.C. Power : see page 7 : Superior to 5000 M at 25 C and 65 % relative humidity : Size 20 : 5 A. max. Size 4 : 60/100 A. max. Size 16 : 10 A. max. Size 0 : 120/200 A. max. 2 Size 12 : 17 A. max. 150 mm : 400 A. max. Size 8 : 33 A. max. 300 mm2 : 600 A. max. 3 9316 Synopsis IN LINE RECEPTACLE PLUGS ACCESSORIES 17 A A 02 A Backnut EEx HERMETICALLY SEALED RECEPTACLES Standard plug 27 A RE 25H Straight for braid termination and thermo-shrink boot Square flange EEx Explosion proof plug EEx 31H 37 A CE Jam nut EEx Plug quick release Elbow for braid termination and thermo-shrink boot EEx 51H PROTECTIVE CAPS 25 B Square flange RM EEx HERMETIC FEEDTHRU Straight for braid termination and overmoulding For receptacle 61H 25 BC Jam nut CM EEx PROTECTIVE CAPS For receptacle with cable 07 B Elbow for braid termination and overmoulding For plug 45 BC GM 07 BC For receptacle explosion-proof For plug with cable 4 EEx Straight for braid termination and double overmoulding 9316 Part-numbering system 9316 - 27 A 19 - 12 PN * *** MANUFACTURER DEUTSCH CONTACT TYPE P : Pin contact (receptacles) S : Socket contact (plugs) UNDERWATER CONNECTOR KEYWAY N : Normal X : Special position * : Other, consult us PRESSURE RANGE 150 bars (2175 psi) : 16 . 750 bars (10875 psi) : 06* (* Consult us) SUFFIX FOR CONTACT For arrangements with # 8 contacts only (19-93, 37-19, 61-21) : 8 : Power contacts * : Coax contacts, (consult us) SHELL TYPE In line receptacle - EEx : 02 Plug : 17 Plug - EEx : 27 Plug quick release : 37 Square flange receptacle : 25 Jam nut receptacle - EEx : 31 Square flange receptacle - EEx : 51 Feedthru - EEx : 61 SEALED VERSION 02, 17, 27, 37, 51* : Type A HERMETIC VERSION 25, 31, 51, 61 : Type H MODIFICATION NUMBER 1A : Less accessory (types 02, 17, 27, 37) A 108 : Plug inserts mirror marking (mandatory for hermetic feedthru) A 810 : Hermetic receptacle, copper contact, Availability see pages 10 and 11 A 5743 : 1 A + A 108 ARRANGEMENTS See pages 6 and 7 SHELL SIZE 9306 : Consult us 9316 : 07, 12, 19, 27, 37, 61, 121 * : Arrangements 121-901 and 121-905 5 9316 Arrangements Male insert receptacle front view or female insert plug, wiring side view. Arrangement 07-0 7 contacts size 20 Service 1 Arrangement 19-7 7 contacts size 12 Service 2 Arrangement 37-0 37 contacts size 20 Service 1 Arrangement 61-0 61 contacts size 20 Service 1 Arrangement 07-93 3 contacts size 16 Service 2 Arrangement 19-12 12 contacts size 16 Service 1 Arrangement 12-0 12 contacts size 20 Service 1 Arrangement 12-93 3 contacts size 12 Service 2 Arrangement 19-93 3 contacts size 8 or coax Service 2 Arrangement 27-0 27 contacts size 20 Service 1 Arrangement 27-2 14 contacts size 16 Service 2 Arrangement 37-2 24 contacts size 16 Service 1 Arrangement 37-3 12 contacts size 12 Service 1 Arrangement 37-19 13 contacts size 20 6 contacts size 8 or coax Service 1 Arrangement 61-14 37 contacts size 16 Service 1 Arrangement 61-21 12 contacts size 8 or coax service 1 Arrangement 121-0 121 contacts size 20 Service 1 Service 1 : Service voltage 250 VAC Service 2 : Service voltage 650 VAC 6 Arrangement 19-0 19 contacts size 20 Service 1 9316 Arrangements Male insert viewed from front face or female insert, wiring side view. Arrangement 27-901 . 1 contacts size 0 Version Rating Service A Sealed 3500 VRMS 1250 VAC 200 A H Hermetic 3500 VRMS 1250 VAC 120 A H... A810 2500 VRMS 750 VAC 200 A Hermetic Arrangement 121-901 1 x 300m2 Arrangement 61-901 1 x 150 mm2 . Version Rating Service A Sealed 5000 VRMS 2000 VAC 400 A H Hermetic Not available H... A810 5000 VRMS 2000 VAC 400 A Hermetic *. Arrangement 61-903 3 contacts size 4 Version A Sealed H Hermetic H... A810 Hermetic Arrangement 121-904 4 contacts size 0 Version Rating Service A Sealed 5000 VRMS 2000 VAC 600 A H Hermetic Not available H... A810 Hermetic Rating 3500 VRMS 3500 VRMS 2500 VRMS . Arrangement 61-904 4 contacts size 4 Version Rating Service A Sealed 3500 VRMS 1250 VAC 100 A H Hermetic 3500 VRMS 1250 VAC 60 A H... A810 Not available Hermetic Service 1250 VAC 100 A 1250 VAC 60 A 750 VAC 100 A Arrangement 121-905 5 contacts size 4 . Version Rating Service A Sealed 3500 VRMS 1250 VAC 200 A H Hermetic Not available H... A810 2500 VRMS 750 VAC 200 A Hermetic *. Version Rating Service A Sealed 3000 VRMS 1000 VAC 100 A H Hermetic Not available H... A810 Hermetic EExd T5 for current 600 A * Hermetic receptacles not available Modification A 810 (Hermetic, copper contact) only available Modification A 810 (Hermetic, copper contact), available. Nota : Voltage rating is test voltage. Other arrangements, consult us. Mechanical keyway Receptacle front view Key U - V - W - Y - Z : Available for some other shell sizes, please consult us.. Key Normal keying position Keying position X Key 7 9316 Hermetic receptacles Square flange - TYPES 25H - 51H TYPE 25H TYPE 51H 45,60 max. 7 to 61 62,60 max. 121 33,60 max. 7 to 61 48,60 max. 121 8,10 max. 7 to 61 10,10 max. 121 O 5,50 - 07-12-19 O 6,50 - 27-37-61-121 O 5,50 - 07-12-19 O 6,50 - 27-37-61-121 Contact over passing # 20 3,60 max. # 16 5,30 max. # 12 4,05 max. # 8 8,75 max. Coax. consult us Power data shee Contacts available on request Reference 9316-25H 07-**-P* 9316-25H 12-**-P* 9316-25H 19-**-P* 9316-25H 27-**-P* 9316-25H 37-**-P* 9316-25H 61-**-P* 9316-25H 121-**-P* B B1 max. MAX. 38,50 39,50 41,50 53,50 57,50 62,50 73,50 41,50 42,50 44,50 56,50 60,50 65,50 73,50 67,70 max. 13,20 max. Contact over passing # 20 3,60 max. # 16 5,30 max. # 12 5,60 max. # 8 7,60 max. Coax. consult us Power data shee Contacts available on request Countersinking O 8,60 - 07-12-19 O 10,60 - 27-37-61-121 C 29,00 30,00 32,00 40,00 44,00 49,00 60,00 F G A max. 29 31 34 41 46 53 67 20,00 23,00 26,00 30,00 34,50 43,50 55,00 33,50 (# 7 to 61) 48,50 (# 121) G1 Reference 20,00 23,00 26,00 30,00 34,50 43,50 55,00 9316-51H 07-**-P* 9316-51H 12-**-P* 9316-51H 19-**-P* 9316-51H 27-**-P* 9316-51H 37-**-P* 9316-51H 61-**-P* 9316-51H 121-**-P* Jam nut - TYPES 31H - 61H TYPE 31H TYPE 61H 66,10 max. 7 to 61 81,10 max. 121 8,10 max. 7 to 61 10,10 max. 121 134,10 max. 8,10 max. 7 to 61 10,10 max. 121 28,10 max. 7 to 61 41,10 max. 121 28,10 max. 7 to 61 31,10 max. 121 Contact over passing # 20 3,60 max. # 16 5,30 max. # 12 4,05 max. # 8 8,75 max. Coax. Consult us Power data sheet Contact available on request 8 Reference A F Reference 29 31 34 41 46 53 67 9316-61H 07-**-PP* 9316-61H 12-**-PP* 9316-61H 19-**-PP* 9316-61H 27-**-PP* 9316-61H 37-**-PP* 9316-61H 61-**-PP* 9316-61H 121-**-PP* max. A 9316-31H 07-**-P* 9316-31H 12-**-P* 9316-31H 19-**-P* 9316-31H 27-**-P* 9316-31H 37-**-P* 9316-31H 61-**-P* 9316-31H 121-**-P* 51,00 52,00 55,00 69,00 74,00 80,00 95,00 9316 In line receptacle / Plugs In line receptacle -TYPE 02A Reference 9316-02 A 07-** P* 1A 9316-02 A 12-** P* 1A 9316-02 A 19-** P* 1A 9316-02 A 27-** P* 1A 9316-02 A 37-** P* 1A 9316-02 A 61-** P* 1A 9316-02 A 121-** P* 1A A L max. max. 31,20 92,50 33,20 92,50 36,20 92,50 43,20 92,50 48,20 92,50 55,20 92,50 69,20 122,50 F 29 31 34 41 46 53 67 Plugs - TYPES 17A - 27A - 37A STANDARD 17A EXPLOSION-PROOF 27A QUICK RELEASE 37A 214, 00 2 mm 78 max. About 4 mm unlocking stroke to release Reference A A1 L max. max. max. 9316 ** A 07-** S* 1A 9316 ** A 12-** S* 1A 9316 ** A 19-** S* 1A 9316 ** A 27-** S* 1A 9316 ** A 37-** S* 1A 9316 ** A 61-** S* 1A 9316 ** A 121-** S* 1A 42,20 44,20 47,20 54,20 59,20 66,20 80,20 51,00 53,00 56,00 63,00 68,00 75,00 88,00 72,20 72,20 72,20 72,20 72,20 72,20 87,20 9 9316 Protection caps Cap for plug - TYPES 07 B - 07 BC WITH FASTENING CABLE 07 BC WITHOUT FASTENING CABLE 07 B Reference A F max. 48,20 max. 7 to 61 63,20 max. 121 9316-07 B 07 9316-07 B 12 9316-07 B 19 9316-07 B 27 9316-07 B 37 9316-07 B 61 9316-07 B 121 31,20 33,20 36,20 43,20 48,20 55,20 69,20 29 31 34 41 46 53 67 G L1 mini. max. Reference A 22,50 25,50 28,90 33,70 36,80 44,50 58,10 200 200 200 200 200 200 200 9316-07 BC 07 9316-07 BC 12 9316-07 BC 19 9316-07 BC 27 9316-07 BC 37 9316-07 BC 61 9316-07 BC 121 Cap for receptacle - TYPES 25 B - 25 BC WITH FASTENING CABLE 25 BC WITHOUT FASTENING CABLE 25 B Reference 9316-25 B 07 9316-25 B 12 9316-25 B 19 9316-25 B 27 9316-25 B 37 9316-25 B 61 9316-25 B 121 54,20 max. 7 to 61 69,10 max. 121 A G L1 max. mini. max. 42,20 44,20 47,20 54,20 59,20 66,20 80,20 30,40 32,00 34,80 41,60 47,80 55,40 71,20 200 200 200 200 200 200 200 Reference A 9316-25 BC 07 9316-25 BC 12 9316-25 BC 19 9316-25 BC 27 9316-25 BC 37 9316-25 BC 61 9316-25 BC 121 Explosion-proof cap for receptacle - TYPE 45 BC WITH FASTENING CABLE Reference 54,20 max. 7 to 61 69,10 max. 121 10 9316-45 BC 07 9316-45 BC 12 9316-45 BC 19 9316-45 BC 27 9316-45 BC 37 9316-45 BC 61 9316-45 BC 121 A G L1 max. mini. max. 42,20 44,20 47,20 54,20 59,20 66,20 80,20 30,40 32,00 34,80 41,60 47,80 55,40 71,20 200 200 200 200 200 200 200 9316 Accessories Backnut Reference 087-0004-07 087-0004-12 087-0004-19 087-0004-27 087-0004-37 087-0004-61 087-0004-95 G L1 R Tightening max. mini. max. A torque. * mN 24,50 27,10 30,80 35,55 38,70 45,90 56,90 4,80 4,80 4,80 4,80 4,80 4,80 4,80 72,20 72,20 72,20 72,20 72,20 72,20 87,20 A 20 22 25 28 32 37 45 22 max. * Valid for all types, all nuts Straight for braid termination and thermo shrink boot Reference G J L L1 P max. mini. max. max. max. max. 640-0336-07 640-0336-12 640-0336-19 640-0336-27 640-0336-37 640-0336-61 640-0336-95 34,90 37,80 42,60 45,80 53,80 57,40 69,70 16,45 19,25 22,25 27,75 31,05 38,45 45,30 88,70 88,70 88,70 91,90 91,90 95,00 115,00 70,95 70,95 70,95 73,95 73,95 77,05 96,15 30,45 33,45 36,95 41,85 45,15 53,15 60,60 72,20 72,20 72,20 72,20 72,20 72,20 87,20 RE R O for cable EExd Elbow for braid termination and thermo shrink boot Reference G J L L1 P R max. mini. max. max. max. max. max. 640-0334-07 640-0334-12 640-0334-19 640-0334-27 640-0334-37 640-0334-61 640-0334-95 34,90 37,80 42,60 45,80 53,80 57,40 * 15,75 18,55 22,35 24,90 29,50 37,40 * 63,50 66,20 69,80 74,80 78,10 85,35 * 45,75 48,45 52,05 57,05 60,35 67,60 * 28,40 31,20 34,30 38,30 42,30 49,40 * 72,20 72,20 72,20 72,20 72,20 72,20 * 61,15 62,20 65,35 67,55 68,00 72,10 CE T EExd O for cable * Consult us RM Straight for braid termination and overmoulding Reference G J L L1 P R max. mini. max. max. max. max. 640-0337-07 640-0337-12 640-0337-19 640-0337-27 640-0337-37 640-0337-61 640-0337-95 34,90 37,80 42,60 45,80 53,80 57,40 69,70 16,45 19,25 22,25 27,75 31,05 38,45 45,30 72,00 72,00 72,00 72,00 72,00 72,00 86,00 54,25 54,25 54,25 54,25 54,25 54,25 67,00 30,30 33,30 36,30 41,70 45,00 53,00 60,60 72,20 72,20 72,20 72,20 72,20 72,20 87,20 O for cable Elbow for braid termination and overmoulding Reference 640-0335-07 640-0335-12 640-0335-19 640-0335-27 640-0335-37 640-0335-61 640-0335-95 G 34,90 37,80 42,60 45,80 53,80 57,40 * J L L1 P R T mini. max. max. max. max. max. 16,45 19,25 22,25 27,75 31,05 38,45 * 73,45 76,40 79,80 85,45 88,65 96,35 * 56,00 58,95 62,35 67,80 71,00 78,70 * 30,30 33,30 36,80 41,70 45,00 53,00 * 72,20 72,20 72,20 72,20 72,20 72,20 * 96,50 98,05 99,80 102,95 106,60 108,60 * CM * Consult us O for cable Straight for braid termination and double overmoulding Reference 640-0180-07 640-0180-12 640-0180-19 640-0180-27 640-0180-37 640-0180-61 640-0180-95 G J J1 L L1 P R max. mini. max. A max. max. max. max. 34,90 37,80 42,60 45,80 53,80 57,40 * 16,45 19,25 22,25 27,75 31,05 38,45 * 10,80 12,80 14,80 17,80 19,80 22,80 * 85,20 85,20 85,20 85,20 85,20 85,20 * 67,25 67,25 67,25 67,45 67,45 67,45 * 30,30 33,30 36,80 41,70 45,00 53,00 * 72,20 72,20 72,20 72,20 72,20 72,20 * GM O for cable * Consult us 11 Mating and unmating Mounting style 9316 MATED Size K max. 7 to 61 121 33,20 48,20 UNMATTED Size 07 12 19 27 37 61 121 Tightening torque mN 50 55 60 70 80 60 110 Square flange receptacle - TYPES 25 - 51 H IMPORTANT NOTE : The surface roughness on the equipments, should be 0.4 - 0.8 micron. A bearing face of 1.6 micron max. is tolerated. Roughness < 1,6 Size C G H max. 25H 51H +0 -- 0,2 + 0,075 -- 0 20,40 23,40 26,40 30,40 34,90 43,90 55,40 20,00 23,00 26,00 30,00 34,50 43,50 55,00 0,10 * Mini wall thickness 15 O M 5 Size 7 to 19 O M 6 Size 27 to 121 < 1,6 * for explosion-proof application 07 12 19 27 37 61 121 29,00 30,00 32,00 40,00 44,00 49,00 60,00 20,00 23,00 26,00 30,00 34,50 43,50 55,00 Jam nut receptacle and feedthru - TYPES 31 H - 61 H Type 31H Type 61H 1 dia. O 4,8 stud shells 07 to 19 1 dia. O 5,8 stud shells 27 to 121 Chamfered 0,7 at 20 Chamfered 0,5 at 45 Assembly in smooth hole (not EExd) Assembly in tapped hole (EExd) * * * 0,2 4+ -- 0 EExd : ISO thread, F class, H6, 8 mm minimum. Size C F 0,2 Assembly in smooth Assembly in Shell 12 + 0,2 24 -- 0 9316-31 H . 9316-61 H ** . 9316-61 H 121 hole (Not EExd) P max. P mini. 20 60 50 5 25 25 tapped hole P1 max. 70 60 07 12 19 27 37 61 121 24,50 25,00 26,50 33,00 35,50 38,50 46,00 29 31 34 41 46 53 67 Pich H Tightening *** +0 -- 0,2 torque mN 150 150 150 200 200 200 250 30,30 32,30 35,30 42,30 47,30 54,30 68,30 70 75 80 90 100 120 145 9316 Accessories Thermo-shrink sleeve Size Sleeve reference 07 12 19 27 37 61 121 086-0104-06 086-0104-06 086-0104-06 086-0104-07 086-0104-07 086-0104-08 086-0104-08 Gaskets and counter - Gasket for shell and accessories 1 2 3 3 4 5 6 Size O'ring for O'ring for O'ring for O'ring for Counter-gasket O'ring for O'ring for accessory Type 61 H Types 31-61 H Type 25 H Type 51 H for receptacles receptacles stainless 07 12 19 27 37 61 121 103-0003-20-A817 103-0003-21-A817 103-0003-23-A817 103-0003-28-A817 103-0003-31-A817 103-0003-35-A817 103-0003-44-A817 103-0003-25-A817 103-0003-26-A817 103-0003-28-A817 103-0003-34-A817 103-0003-37-A817 103-0003-41-A817 103-0003-50-A817 103-0003-19-A817 103-0003-20-A817 103-0003-22-A817 103-0003-25-A817 103-0003-27-A817 103-0003-33-A817 103-0003-42-A817 103-0003-19-A817 103-0003-20-A817 103-0003-22-A817 103-0003-25-A817 103-0003-27-A817 103-0003-33-A817 103-0009-30-A817 103-0021-16 103-0021-17 103-0021-19 103-0021-23 103-0021-26 103-0021-30 103-0021-38 103-0003-16-A010 103-0003-17-A010 103-0003-19-A010 103-0003-23-A010 103-0003-26-A010 103-0003-30-A010 103-0003-38-A010 103-0003-17-A817 103-0003-19-A817 103-0003-21-A817 103-0003-24-A817 103-0003-26-A817 103-0003-31-A817 103-0003-38-A817 DEUTSCH recommends : On hermetic or standard receptacles, lubrication of the coupling O'rings (inside the receptacles) after about 50 mating/unmating operations. We recommend silicon grease. 13 9316 Contacts and Tooling CONTACTS CABLE Stripping length 4 to 5 mm # contacts Index without 20 * P S P S * 047-1024-20 P 047-1025-20 S 047-0894-16 047-0893-16 P S * 047-1022-16 P 047-1023-16 S * 047-1024-16 P 047-1025-16 S 047-0894-12 047-0893-12 P S * 047-1022-12 P 047-1023-12 S * 047-1024-12 P 047-1025-12 S 87 88 047-1023-20 8 8 047-0893-20 047-1022-20 without 12 047-0894-20 Type * without 16 Reference 047-0894-08 047-0893-08 P S 047-1329-08 P 047-1330-08 S 047-1325-08 P 047-1326-08 S Crimp barrel AWG wire Section mm2 1,30 18 to 24 0,22 to 0,93 0,49 26 to 30 0,055 to 0,15 2,50 16 to 18 0,93 to 1,34 1,68 16 to 18 0,93 to 1,34 1,30 18 to 24 0,22 to 0,93 2,17 12 to 14 1,91 to 3,18 2,52 12 to 14 1,91 to 3,18 1,30 18 to 24 0,22 to 0,93 1,96 14 to 18 0,93 to 1,91 4,70 8 10 3,46 10 5,30 4,52 8 8,98 O mini. Standard contacts supplied with the connector : Special contacts, to be ordered separately Coaxial contacts and tooling Please, consult us 14 O sheath 1,52 to 2,54 2,66 to 3,42 3,80 to 4,95 4,30 to 5,50 9316 FILLER PLUGS Contacts and Tooling CRIMPING TOOL INSERTION TOOL EXTRACTION TOOL Rear insertion tool Front insertion tool Reference Reference Connector rear face Reference Reference Reference Locator 057-0461-11 057-0503-21 057-0473-60 006-0893-20 057-0463-12 057-0591-32 057-0461-11 057-0503-21 057-0479-60 057-0472-60 057-0472-60 092-1057-16 057-0461-11 057-0503-21 057-0473-60 057-0478-60 057-0471-60 057-0471-60 092-1056-12 057-0461-11 057-0503-21 057-0473-60 057-0477-60 057-0472-60 Solder 047-1052-08 057-0474-60 057-0480-60 057-0585-11 15 Notes 9316 Other Products Linear downhole mateable connectors Linear power wet mateable connectors Signal wet mateable connectors Splash zone mateable connectors Customized connectors and services Connecteurs Electriques Deutsch 17, rue Lavoisier z.i. n 2 B.P. 117 27091 EVREUX CEDEX 9 (FRANCE) Tel.: +33 (0)2 32 23 57 00 - Fax : +33 (0)2 32 23 58 00 - Telex : 770848F Web : www.compagnie-deutsch.com - E-mail : bco@compagnie-deutsch.com Printed in France by Connecteurs Electriques DEUTSCH /Evreux Ref.: CC 640-22 A Edition Octobre 1999