TIP115 / TIP117 — PNP Epit axial Silicon Darlington Transistor
© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
TIP115 / TIP117 Rev. 1.1.0
November 2014
TIP115 / TIP117
PNP Epitaxial Silicon Darlington Transistor
Features
Monolithic Constructi on with Built-in Base -Emitte r
Shunt Resistors
High DC Current Gain:
hFE = 1000 @ VCE = -4 V, IC = -1 A (Minimum)
Low Collector-Emitter Saturation Voltage
Industr ial Use
Complementary to TIP110 / TIP111 / TIP112
Ordering Information
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-
ble above the re co mmen ded operating co nd iti ons and stressing the part s to the se lev el s i s n ot re co mme nded. In addi-
tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TC = 25°C unless otherwise noted.
Part Number Top Mark Package Packing Method
TIP115 TIP115 TO-220 3L (Single Gauge) Bulk
TIP117TU TIP117 TO-220 3L (Single Gauge) Rail
Symbol Parameter Value Unit
VCBO Collector-Base Voltage TIP115 -60 V
TIP117 -100
VCEO Collector-Emitter Voltage TIP115 -60 V
TIP117 -100
VEBO Emitter-Base Voltage -5 V
ICCollector Current (DC) -2 A
ICP Collector Current (Pulse) -4 A
IBBase Current (DC) -50 mA
TJJunction Temperature 150 °C
TSTG Storage Temperature Range -65 to 150 °C
1.Base 2.Collector 3.Emitter
1TO-220
Equivalent Circuit
B
E
C
R1 R2
R1 10kΩ
R2 0.6kΩ
TIP115 / TIP117 — PNP Epit axial Silicon Darlington Transistor
© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
TIP115 / TIP117 Rev. 1.1.0 2
Thermal Characteristics
Values are at TC = 25°C unless otherwise noted.
Electrical Characteristics(1)
Values are at TC = 25°C unless otherwise noted.
Note:
1. Pulse test: pw300 μs, duty cycle 2%.
Symbol Parameter Value Unit
PC Collector Dissipation (TA = 25°C) 2 W
Collector Dissipation (TC = 25°C) 50
Symbol Parameter Conditions Min. Max. Unit
VCEO(sus) Collector-Emitter Sustaining
Voltage TIP115 IC = -30 mA, IB = 0 -60 V
TIP117 -100
ICEO Collector Cut-Off Current TIP115 VCE = -30 V, IB = 0-2
mA
TIP117 VCE = -50 V, IB = 0-2
ICBO Collector Cut-Off Current TIP115 VCB = -60 V, IE = 0 -1 mA
TIP117 VCB = -100 V, IE = 0 -1
IEBO Emitter Cut-Off Current VEB = -5 V, IC = 0 -2 mA
hFE DC Current Gain VCE = -4 V, IC = -1 A 1000
VCE = -4 V, IC =- 2 A 500
VCE(sat) Collector-Emitter Saturation Voltage IC = -2 A, IB = -8 mA -2.5 V
VBE(on) Base-Emitter On Voltage VCE = -4 V, IC = -2 A -2.8 V
Cob Output Capacitance VCB = -10 V, IE = 0,
f = 0.1 MHz 200 pF
TIP115 / TIP117 — PNP Epit axial Silicon Darlington Transistor
© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
TIP115 / TIP117 Rev. 1.1.0 3
Typical Performance Characteristics
Figure 1. Static Characteristic Figure 2. DC Current Gain
Figure 3. Collector-Emitter Saturation Voltage and
Base-Emitter Saturation Voltage Figure 4. Collector Output Capacitance
Figure 5. Safe Operating Area Figure 6. Power Derating
-0 -1 -2 -3 -4 -5
-0
-1
-2
-3
-4
-5
IB = -800μA
IB = -900μA
IB = -1000 μA
IB = -700μA
IB = -600μA
IB = -500μA
I
B
= -400
μ
A
IB = -300μA
IB = -200μA
IB = -100μA
IC[A], COLLECTOR CURRENT
VCE[V], CO L L ECT OR-EM IT TER VOL T A GE
-0.01 -0.1 -1 -10
10
100
1k
10k
VCE = -4V
hFE, DC CURRENT GAIN
IC[A], COLLECTOR CURRENT
-0.01 -0.1 -1 -10
-0.1
-1
-10
-100
IC = 500 IB
VCE(sat)
VBE(sat)
VBE(sat), VCE(sat)[V], SATURATION VOLTAGE
IC[A], COLLECTOR CURRENT
-0.01 -0.1 -1 -10 -100
1
10
100
1000
f = 0.1 MHz
Cob[pF], CAPACITANCE
VCB[V], COLLECTOR-BASE VOLTAGE
-1 -10 -100
-0.1
-1
-10
5 ms
1 ms
DC
TIP 115
TIP 116
TIP 117
IC[A], COLLECTOR CURRENT
VCE[V], COLLECTOR-EMITTER VOLTAGE
0 25 50 75 100 125 150 175
0
10
20
30
40
50
60
70
80
PC[W], POWER DISSIPATION
TC[oC], CASE TEMPERATURE
TIP115 / TIP117 — PNP Epit axial Silicon Darlington Transistor
© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
TIP115 / TIP117 Rev. 1.1.0 4
Physical Dimensions
Figure 7. TO-220, MOLDED, 3LEAD, JEDEC VARIATION AB
© Fairchild Semiconductor Corporation www.fairchildsemi.com
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
AccuPower¥
Awinda
®
AX-CAP
®
*
BitSiC¥
Build it Now¥
CorePLUS¥
CorePOWER¥
CROSSVOLT¥
CTL¥
Current Transfer Logic¥
DEUXPEED
®
Dual Cool™
EcoSPARK
®
EfficientMax¥
ESBC¥
Fairchild
®
Fairchild Semiconductor
®
FACT Quiet Series¥
FACT
®
FAST
®
FastvCore¥
FETBench¥
FPS¥
F-PFS¥
FRFET
®
Global Power Resource
SM
GreenBridge¥
Green FPS¥
Green FPS¥ e-Series¥
Gmax¥
GTO¥
IntelliMAX¥
ISOPLANAR¥
Making Small Speakers Sound Louder
and Better™
MegaBuck¥
MICROCOUPLER¥
MicroFET¥
MicroPak¥
MicroPak2¥
MillerDrive¥
MotionMax¥
MotionGrid
®
MTi
®
MTx
®
MVN
®
mWSaver
®
OptoHiT¥
OPTOLOGIC
®
OPTOPLANAR
®
®
PowerTrench
®
PowerXS™
Programmable Active Droop¥
QFET
®
QS¥
Quiet Series¥
RapidConfigure¥
¥
Saving our world, 1mW/W/kW at a time™
SignalWise¥
SmartMax¥
SMART START¥
Solutions for Your Success¥
SPM
®
STEALTH¥
SuperFET
®
SuperSOT¥-3
SuperSOT¥-6
SuperSOT¥-8
SupreMOS
®
SyncFET¥
Sync-Lock™
®*
TinyBoost
®
TinyBuck
®
TinyCalc¥
TinyLogic
®
TINYOPTO¥
TinyPower¥
TinyPWM¥
TinyWire¥
TranSiC¥
TriFault Detect¥
TRUECURRENT
®
*
μSerDes¥
UHC
®
Ultra FRFET¥
UniFET¥
VCX¥
VisualMax¥
VoltagePlus¥
XS™
Xsens™
௝❺
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. T
O OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE
AT HTTP://WWW.FAIRCHILDSEMI.COM.
FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY
PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY
THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain
life, and (c) whose failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical
and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise.
Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Preliminary First Production
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I72
®
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Fairchild Semiconductor:
TIP115