REVISION S MEC8-1XX-XX-XX-D-RXX-XX (No OF POS x 0.800[.0315]) + 3.00[.118] REF C 1.90 .07 REF (No OF POS -1) x 0.800[.0315] 0.800.05 .031.002 (TOL NON-ACCUM) DO NOT SCALE FROM THIS PRINT 70 CL 02 S 7.40 .29 REF POSITION #1 INDICATOR 01 69 0.800.05 .031.002 (TOL NON-ACCUM) FIG 1 "A" CL C "A" REF ROW SPECIFICATION -D: DOUBLE (USE MEC8-XX-XX-D-RXX) * = NOT TOOLED ** = SEE NOTE 4 ROW 2 (SEE TABLE 2) 6.25 .246 REF 0.850.08 .033.003 (TYP) ROW 1 (SEE TABLE 2) 0.850.08 .03.003 CL C "B" 0.15[.006] C C "C" REF SEE TABLE 1 C "A" 0.90 .04 REF TAIL OPTION -RA1: STANDARD (SEE FIG. 1) (USE MEC8-XX-XX-D-RA1, C-173-01-X & C-174-XX-X) *-RA2: ELEVATED (SEE FIG. 3) (USE MEC8-XX-XX-D-RA2, C-173-02-X & C-174-02-X) -RL1: LATCHING (SEE FIG.4) (USE MEC8-XX-XX-D-RL1, C-173-01-X, C-174-03-X & WT-25-03-T, AVAILABLE IN POS -13, -25, -37 & -49) CARD THICKNESS -01: 1mm [.039] THICK CARD (USE MEC8-XX-01-D-RAX) ** -02: 1.57mm [.062] THICK CARD (USE MEC8-XX-02-D-RAX) PLATING -L: 10" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -S: 30" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -LM: 10" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -SM: 30" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL FOR POSITIONS -10, -20, -30 & -35 (SHOWN: MEC8-135-01-XX-D-RA1) (No OF POS x 0.800[.0315]) + 1.40[.055] REF OPTION -TR: TAPE & REEL No OF POSITIONS (PER ROW) -10, -20, -30, -35 (SEE FIG. 1) -40 & -50 (SEE FIG. 2, SHEET 2) -13, -25, -37, -49 (-02 CARD THICKNESS ONLY, SEE FIG. 2) 2.65 .10 REF 0.95 .04 REF (TYP) 1.40 .06 REF "D" (TYP) 1.05 .04 REF (TYP) 0.95 .037 REF (TYP) (No OF POS + 2) x 0.80[.031] REF 9.10 .36 REF 0.20 .01 REF (TYP) CL SECTION "A"-"A" MEC8-XX-XX-D-RA1 1.40 .06 REF CL DESIGNED & DIMENSIONED IN MILLIMETERS (INCHES FOR REFERENCE ONLY) UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS. NOTES: .X: .3 [.01] 2 .XX: .13 [.005] .XXX: .051 [.0020] 1. C REPRESENTS A CRITICAL DIMENSION. 2. BURR ALLOWANCE: 0.038[.0015] MAX. 3. MINIMUM PUSHOUT FORCE: .5 LB. 4. -02 CARD THICKNESS ONLY AVAILABLE ON -RA1 & -RL1 TAIL OPTION. 5. PARTS TO BE PACKAGED IN TRAYS UNLESS OTHERWISE SPECIFIED. F:\DWG\MISC\MKTG\MEC8-1XX-XX-XX-D-RXX-XX-MKT.SLDDRW TOLERANCES ARE: DECIMALS ANGLES PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. MATERIAL: DO NOT SCALE DRAWING FLAMMABILITY RATING: UL 94V-O INSULATOR: LCP -01: COLOR: NATURAL -02: COLOR: BLACK CONTACT: PHOS BRONZE WELB TABS: PHOS BRONZE SHEET SCALE: 2.25:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: 0.8mm [.031"] RIGHT ANGLE EDGE CARD ASSEMBLY DWG. NO. MEC8-1XX-XX-XX-D-RXX-XX BY: KEVIN B 10/18/01 SHEET 1 OF 4 REVISION S C ((No OF POS + 3) x 0.800[.0315]) 0.13[.005] C C 1.90 .07 REF "E" 0.13[.005] 4.00 .16 0.800.05 .031.002 (TOL NON-ACCUM) 02 FIG 2 80 FOR POSITIONS -13, -25, -37, -40, -49 & -50 (FOR -13, -25, -37 & -49: -02 CARD THICKNESS ONLY) (SAME AS FIG 1, UNLESS OTHERWISE STATED) (SHOWN: MEC8-140-01-XX-D-RA1) 01 79 0.800.05 .031.002 (TOL NON-ACCUM) C "E" 0.13[.005] C 4.00 .16 C (No OF POS + 3) x 0.800[.0315] (No OF POS x 0.80[.031]) + 6.20[.244] REF "H" REF "F" REF "G" REF S (No OF POS + 6) x 0.80[.031] REF CL CL PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2.5:1 F:\DWG\MISC\MKTG\MEC8-1XX-XX-XX-D-RXX-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: 0.8mm [.031"] RIGHT ANGLE EDGE CARD ASSEMBLY DWG. NO. MEC8-1XX-XX-XX-D-RXX-XX BY: KEVIN B 10/18/01 SHEET 2 OF 4 REVISION S FIG 3 -RA2: ELEVATED OPTION (SAME AS FIG 2, UNLESS OTHERWISE STATED) (SHOWN: MEC8-150-01-XX-D-RA2) * = NOT TOOLED MEC8-XX-01-D-RA2 "C" ROW 1 (SEE TABLE 2) "A" REF (SEE TABLE 2) ROW 2 (SEE TABLE 2) C "B" .15[.006] (SEE TABLE 2) "C" REF (SEE TABLE 2) 4.65 .18 REF "D" TYP (SEE TABLE 2) "C" SECTION "C"-"C" F:\DWG\MISC\MKTG\MEC8-1XX-XX-XX-D-RXX-XX-MKT.SLDDRW PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2.5:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: 0.8mm [.031"] RIGHT ANGLE EDGE CARD ASSEMBLY DWG. NO. MEC8-1XX-XX-XX-D-RXX-XX BY: KEVIN B 10/18/01 SHEET 3 OF 4 REVISION S (No OF POS x 0.80[.03]) + 17.20[.68] REF 1.00 .04 REF "F" 0.60 .02 REF 4.50 .18 REF 1.45 .06 REF 0.56 .02 REF 3.30 .13 REF "F" 0.30 .01 REF 7.74 .30 REF SECTION "F"-"F" 3.00 .12 REF MEC8-XX-XX-D-RL1 1.25 .05 REF 2.00 .08 REF WT-25-03-T C 2.12 .08 (No OF POS x 0.800[.031]) + 14.95[.589] FIG 4 -RL1: LATCHING OPTION (SAME AS FIG 2, UNLESS OTHERWISE STATED) (SHOWN: MEC8-125-01-XX-D-RL1 (AVAILIBLE ONLY IN POS -13, -25, -37 & -49) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2.5:1 F:\DWG\MISC\MKTG\MEC8-1XX-XX-XX-D-RXX-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: 0.8mm [.031"] RIGHT ANGLE EDGE CARD ASSEMBLY DWG. NO. MEC8-1XX-XX-XX-D-RXX-XX BY: KEVIN B 10/18/01 SHEET 4 OF 4