Technical Data DS4072
Effective June 2017
Supersedes March 2013
Product features
TVSA
Transient voltage ESD suppressor
•Lead free, halogen free and RoHS compliant for
global applications
•Single-line, bi-directional device for placement
flexibility
•Silicon based chip
•Low capacitance to meet the needs for high speed
single transient voltage protection
•Provides ESD protection with fast response time
(<1ns) allowing equipment to pass IEC 61000-4-2
level 4 test
•Low profile designs for board space savings
•Low leakage current reduces power consumption
•Low clamping voltage
•Solid-state silicon-avalanche technology
Pb
HALOGEN
HF
FREE
Applications
•Computers and peripherals
•Digital cameras
•Mobile phones
•DVD/Media Players
•MP3/Multimedia players
•A-V Equipment
•External storage
•DSL Modems
•Set top boxes
•Docking systems
V18 C001
Product Family
Size
Working DC Voltage
Capacitance in pF*
* Part numbers use “R” to denote decimal point for decimal values of pico farads.
04
MLVB
Packaging
•Size 0402: 10,000 pieces per reel - EIA (EIAJ)
•Size 0603: 4000 pieces per reel - EIA (EIAJ)
Surface Mount Device
12
Equivalent Circuits
Specifications
Part Stand-O Breakdown Clamping Voltage Capacitance ESD Leakage Current
Number Size Voltage Voltage At Ipeak = 1A pF Air/Contact (kV) (typical)
TVSA02V05C004 0201 5 10 17 4 15/8 < 10nA
TVSA04V05C006 0402 5 10 17 6 15/8 < 10nA
Stand-off Voltage - Maximum DC operating voltage the diode can maintain and not exceed 1mA leakage
current. Breakdown Voltage - Measured at any I/O pin to ground at 1mA DC current.
Clamping Voltage - Maximum peak voltage across the diode with 8/20ms waveform and 1A pulse current.
Capacitance - Device capacitance measured with zero volt bias at 1MHz.
ESD Air/Contact - Voltages tested to IEC 61000-4-2.
Eaton
Electronics Division
1000 Eaton Boulevard
Cleveland, OH 44122
United States
www.eaton.com/electronics
© 2017 Eaton
All Rights Reserved Printed in USA
Publication No. DS4072 BU-SB13279
June 2017
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written
approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly
used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also
reserves the right to change or update, without notice, any technical information contained in this bulletin.
Technical Data DS4072
Effective June 2017
TVSA
Transient voltage ESD suppressor
Dimensions - mm
W
H
L
C
Size LWHC
0201 0.60±0.05 0.30±0.05 0.30±0.05 0.20±0.10
0402 1.00±0.15 0.50±0.10 0.50±0.10 0.25±0.15
c
b b
d
a
Recommended Pad Layout - mm (in)
Size ba cd
0201 0.23 0.30 0.45 0.83
(0.009) (0.012) (0.018) (0.033)
0402 0.51 0.61 0.51 1.70
(0.020) (0.024) (0.020) (0.067)
Tape Packaging Specifications - mm
0201 Carrier Dimensions
BA WE FP0 P1 P2 D0 T
0.37 0.69 8.0 1.75 3.5 4.0 2.0 2.0 1.55 0.42
±0.03 ±0.03 ±0.1 ±0.05 ±0.05 ±0.1 ±0.05 ±0.05 ±0.05 ±0.03
0402 Carrier Dimensions
0.58 1.2 8.0 1.75 3.5 4.0 2.0 2.0 1.55 0.60
±0.03 ±0.03 ±0.1 ±0.05 ±0.05 ±0.1 ±0.05 ±0.05 ±0.05 ±0.03
Time (seconds)
Temperature (°C)
Soldering Recommendations
• Compatible with lead and lead-free solder reflow processes
• Peak reflow temperatures and durations:
- IR Reflow = 260°C max for 30 sec. max.
- Wave Solder = 260°C max. for 10 sec. max.
• Recommended IR Reflow Profile:
