MS-156-HRMJ-14 - Hirose Electric - Datasheet.Directory

1

Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

MS-156HF Series Halogen Free

2008.5

■Features

1. Low insertion loss

0.1 dB typical at 6 GHz (not mated with the plug).

2. Space-saving design

2.7 mm x 2.7 mm occupied board space.

3. Low profile

1.6 mm protrusion above the board.

4. Lightweight

0.025 g. total weight (without vacuum cap).

5. Durability

100 mating/unmating cycles, with corresponding plug.

6.

Performs over a wide frequency range

Applicable frequencies range over a wide band,

from DC to 6 GHz.

7.

Solder wicking prevention

Nickel plating barrier on the contacts prevents solder

compound intrusion (wicking) into the contact

engagement areas.

8.

Board placement with automatic equipment

Packaged on tape-and-reel. Also available with a

vacuum pick-up cap over each switch.

9.

RoHS compliant

All components and materials comply with the

requirements of the EU Directive 2002/95/EC.

10.

Halogen Free

Chlorine, and bromine are not used in the receptacles.

*Definition according to IEC 61249-2-21.

Br 900 ppm max., Cl 900 ppm max., and Br + Cl 1500

ppm max.

■Applications

Portable terminals, ETC, notebook computers (Bluetooth),

wireless LAN, POS terminals, GPS terminals, PDA, and any

small devices requiring verification of antenna/circuit

performance.

■Overview

Developed for inspection of high frequency

circuits used in portable terminals.Verification of

the circuit performance is

accomplished by simply

inserting the external plug

in the board mounted

receptacle.This action re-directs the circuit from

normal condition to the plug side. Removing the

plug restores circuit to its normal condition.

MS-156HF

Space-saving design

Low profile -1.6 mm protrusion above the board.

Lightweight -0.025 g. total weight.

Several types of plugs

Several types of SMA conversion adapters

Adapter for plug inspection

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

2

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

■Specifications

100 mA max.

100 V DC

100 V AC / 1 minute

Frequency:10 to 55 Hz, single amplitude of

0.75 mm, 2 hours in each of the 3 axis.

Acceleration of 490 m/s2, 6 ms duration, sine half-

wave waveform, 3 cycles in each of the 3 axis

Temperature: -55ç /+5ç to +35ç /+85ç /+5ç to +35ç

Time: 30 /2 to 3 /30 /2 to 3 (Minutes)

100 cycles

96 hours at 85ç

96 hours at -55ç

96 hours at 40±2ç, and humidity of 90 to 95%

100 cycles

100 mø max.

1000 Mø min.

No flashover or insulation breakdown

Contact resistance: 100 mø max.

Insulation resistance: 10 Mø min.

Contact resistance: 100 mø max.

Insulation resistance: 10 Mø min.

Contact resistance: 100 mø max.

Insulation resistance: 10 Mø min.

Contact resistance: 100 mø max.

Insulation resistance: 10 Mø min.

Contact resistance: 100 mø max.

1. Contact resistance

2. Insulation resistance

3. Withstanding voltage

4. Vibration

5. Shock

6. Temperature cycle

7. High temperature exposure

8. Low temperature exposure

9. Humidity

10.

Durability (mating/un-mating,

with corresponding plug)

Item Specification Conditions

Shell

Insulator

Common terminal

Antenna terminal

Phosphor bronze

6T Nylon

Beryllium copper

Phosphor bronze

Gold plated

---------------------------

Selective gold plated

---------------------------

UL94HB

---------------------------

--------

-------------------

Part Material Finish Remarks

Operating temperature range

Rated power

Frequency range

Insertion loss

Isolation

V.S.W.R

Not mated with the plug

-40ç to +85ç

2W

DC to 6GHz

0.1 dB max. (DC to 2.5GHz)

0.15 dB max. (2.5GHz to 6.0GHz)

1.2 max. (DC to 2.5GHz)

1.3 max. (2.5GHz to 6.0GHz)

Mated (MS-156-HRMJ-3)

-40ç to +85ç

2W

DC to 6GHz

0.5 dB max. (DC to 3.0GHz)

1.2 dB max. (3.0GHz to 6.0GHz)

1.4 max. (DC to 3.0GHz)

1.8 max. (3.0GHz to 6.0GHz)

20 dB max. (DC to 2.0GHz)

15 dB max. (2.0GHz to 4.0GHz)

13 dB max. (4.0GHz to 6.0GHz)

■Materials

No electrical discontinuity of 1 μs or more

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

3

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

BTypical Data

0.0 1.0 2.0 3.0 4.0 5.0 6.0

[dB]

1.0

1.1

1.2

1.3

1.4

1.5

1.6

1.7

1.8

1.9

2.0

INSERTION LOSS

V.S.W.R.

-1.0

-0.9

-0.8

-0.7

-0.6

-0.5

-0.4

-0.3

-0.2

-0.1

0.0

[GHz]

4.02.0

10

15

20

25

30

35

40

45

ISOLATION

DC 6.0 [GHz]

[dB]

Insertion Loss [dB]

V.S.W.R.V.S.W.R.

Isolation [dB]

●NORMALLY CLOSED(N.C)~(Not mated with the plug)

4.02.0

INSERTION LOSS

V.S.W.R.

1.0

1.2

1.4

1.6

1.8

DC 6.0 [GHz]

[dB]

0.0

0.5

1.0

1.5

Insertion Loss [dB]

●OPEN(N.O)~(Mated with the plug)

●ISOLATION

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

4

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

■Receptacle

BPCB mounting pattern and metal mask dimensions

0.4

1.6

Ø2

0.6 (0.05)

2.7

Center of

mating plug

1.4

2.7 A terminal

C terminal

P

Part Number

MS-156HF

MS-156HF(01)

MS-156HF(20)

CL No.

358-0238-4

358-0238-4-01

358-0238-4-20

10,000 pieces/reel

100 pieces/bag

2,000 pieces/reel

Packaging

1.15

Ø2.75

2

Ｅ

1.4

2.65

( 3.4 )

POINT M

2.65

1.25

( 2.9 )

0.9 0.450.3

1.4

0.55

3

1.4

0.7

0.55

3

1.4

0.9

1.25

This area must be free of conductive traces and resist field.

0.1 to 0.12 thick

Metal mask dimensions

PCB mounting pattern

Part Number

MS-156HF(02)

MS-156HF(22)

CL No.

358-0238-4-02

358-0238-4-22

8,500 pieces/reel

1,500 pieces/reel

Packaging

●With vacuum pick-up cap

●Without vacuum pick-up cap

Note:Vacuum pick-up cap flat can

be oriented in any direction.

Orientation will not affect

placement of the switch on the

board.

* Lead coplanarity within 0.1mm

* Request drawing of the specific part for exact dimensions and tolerances.

* Specified dimensions must be followed to assure correct board placement and performance.

MS-156HF Plug MS-156HF

G

B

G

C

G

A

Plug

G

B

G

C

G

A

Not mated with the plug(N.C) Mated with the plug(N.O)

BCircuit diagram

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

5

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

BPrecautions

Recommended Mounting of MS-156HF coaxial switch

on the PCB during the manufacturing process

MS-156HF

To avoid contamination when cutting-off,

do not place PCB bridge close to the

mounted MS-156HF.

1. This product is intended to be used for circuit inspection only. Consult us if any other application is

considered.

2. Cross-hatched area shown on the PCB mounting pattern must be free of any conducive traces. Placing

conductive traces in this area may affect performance and will void product warranties.

When the bottom surface of the product (i.e., the shaded area of the specified land dimensions

diagram on the previous page) has been processed with a susbtrate copper trace and resist processing,

Hirose Electric will not be able to warrant the product.

3. Do not use hand soldering for mounting of MS-156HF.

Doing so could result in solder and flux wicking to the contact areas.

4. Exercise caution as not to allow any debris to enter the board mounted MS-156HF when cutting PCB.

5. Do not use the washing process.

6. Please refrain from using the product in environments specifically affected by excessive vibration, shock,

dust, high humidity, gases, very high temperatures and very low temperatures such as outdoor

equipment. It might cause degradation or destruction of the product.Even if it endures during a short time,

long time quarification is not quaranteed.

7. For use of this product, be sure to put contact area of plug on position P(P4 full view) perpendicularly.

8. Plugs can be roughly classified to two types.

- For mass production line automatic check (Press down type)

- For manual check (With retentive lock) : Unable to be used at production line.

9. When automatic inspections are to be performed during the manufacturing operations, request the MS-

156 plug connector manual for examples of implementation.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

6

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

BPackaging Specifications

●Without vacuum cap ●Reel dimensions

2.2

4

2

Ø1.5

5.5 1.75

12

12.4

Ø13

ØR

(Ø60)

Unreeling direction

●With vacuum cap ●Reel dimensions

2.6

4

2

Ø1.5

5.5 1.75

12

12.4

Ø13

ØR

(Ø60)

Unreeling direction

BRecommended Temperature Profile

qMaximum temperature

wPeak temperature

ePeak temperature time

r230ç min.

t150ç to 180ç

Metal mask thickness

Reflow cycles : 0.1 to 0.12 mm

: 2 cycles

: 250ç

: 240ç to 250ç

: 10 sec. max.

: 30 sec. max.

: 60 sec. to 90 sec.

Using Lead-free Solder paste

30 sec.max.

Temperature (ç)

50

0

100

150

200

180

230

250

60 sec. to 90 sec. Time (sec.)

10 sec.max.

Part Number

MS-156HF

MS-156HF(20)

Reel Size

R = Ø380mm

R = Ø180mm

10,000 pieces/reel

2,000 pieces/reel

Packaging

Part Number

MS-156HF(02)

MS-156HF(22)

Reel Size

R = Ø380mm

R = Ø180mm

8,500 pieces/reel

1,500 pieces/reel

Packaging

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

7

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

■Plugs

●Press down, right angle

Ø3.2

20.9

Ø4

Ø6

4-C1

11.15 2.9

M8

Part Number

Applicable cable: 1.5D-HQEW, 1.5D-QEW (Fujikura Ltd.)

CL No. Durability

358-0173-0MS-156-C(LP)-1 10,000 Times

●Simplified lock, right angle

Ø7.9

Ø5.48

Ø4

Ø0.5

4-C1

8.2510

3

25.25

Ø3.2

1.6

M8

Part Number

Applicable cable: 1.5D-HQEW, 1.5D-QEW (Fujikura Ltd.)

CL No. Durability

358-0174-3MS-156-C(LP)-2 500 Times

■SMA Conversion Adapters

●Simplified lock, straight, short

Ø0.5

24.4

1.6 8

1/4-36UNS-2A

Ø4.27

Ø5.48

Ø8.5

5.2

11.3

Part Number CL No. Durability

358-0170-2MS-156-HRMJ-2 500 Times

●Simplified lock, straight, long

Ø0.5

8

Ø

8.5

1/4-36UNS-2A

5.219.8

12

32.9

Ø4.3

Ø5.48

1.6

Part Number CL No. Durability

358-0177-1MS-156-HRMJ-5 500 Times

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

8

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

●Press down, with flange, short

1/4-36UNS-2A

18.63

8.12

8

28.13

Ø20

14

Ø3.4

Ø5

1

2-Ø2.6

Part Number CL No. Durability

358-0171-5MS-156-HRMJ-3 10,000 Times

8

33.01

13

23.51

Ø3.4

Ø5

2-Ø2.6

14

1/4-36UNS-2A

1

Ø20

Part Number CL No. Durability

358-0198-1MS-156-HRMJ-14 10,000 Times

●Press down, with flange

(Increased self alignment)

Ø4.3

Ø5.9

14

8

2-Ø2.6

Ø20

1

28.13

18.63

8.12

1/4-36UNS-2A

Part Number CL No. Durability

358-0181-9MS-156-HRMJ-6 10,000 Times

●Press down, with flange, long

●Floating

4.27

1.45

2-Ø2.6

Ø24

15

20

Ø3.4

Ø5

Ø10

2.5

20.7

31.06

1/4-36UNS-2A

Part Number CL No. Durability

358-0180-6MS-156-HRMJ-9 10,000 Times

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

9

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

●Floating (Self-Pressing)

13

Ø3.8

11.75

28.24 2.5

38.6

20

1/4-36UNS-2A

1.45

Ø5.4

Ø10.3

Ø24

2-Ø2.6

Part Number CL No. Durability

358-0194-0MS-156-HRMJ-10 10,000 Times

12

Ø4.3

Ø5.9

Ø10.3

11.75

29.49 2.5

39.85

3.75

20

1/4-36UNS-2A

Ø24

2-Ø2.6

Part Number CL No. Durability

358-0196-6MS-156-HRMJ-12 10,000 Times

●Floating (Self-Pressing)

30 12

2.5

14.75

20

7.3

Ø4.3

Ø5.9

Ø11

3.75

1/4-36UNS-2A

2-Ø2.6

M11.9

17.3

Ø24

●Floating (Self-Pressing)

●Adapter for plug inspection

Ø2

Ø6

8.3

Ø9

3 6.3

16.05

0.75

1/4-36UNS-2A

Part Number CL No. Durability

358-0188-8MS-156R-HRMJ-1 500 Times

Part Number CL No. Durability

358-0205-5MS-156LP-HRMJ-4 10,000 Times

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

10

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

●Adapter for plug inspection

0.75 13.21 2.54

41.9

14.3

5/8-24NEF-2A

Ø2

Ø5.45

Ø22

Part Number CL No. Durability

358-0176-9MS-156R-NJ-1 500 Times

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.