WINSLOW ADAPTICs Data Sheet - Stamped I.C. Sockets W3100TRC W3100T The W3100 Series uses a phosphor bronze contact with 2 plating options RHoS compliant Tin or Tin/Lead . Moulding material is 30%GF PBT rated to UL 94 V-0. Designed for automatic PCB loading machines features include; overstress protection, large target area for ease of IC insertion and a 35 degree angled contact to prevent the IC leg from going behind the contact during insertion. Part No. Pins Pitch A B Part No. W3106TRC 6 7.62 7.49 10.14 W3106T 6 7.62 W3108TRC 8 7.62 10.03 10.14 W3108T 8 7.62 10.03 10.14 W3114TRC 14 7.62 17.65 10.14 W3114T 14 7.62 17.65 10.14 W3116TRC 16 7.62 20.19 10.14 W3116T 16 7.62 20.19 10.14 W3118TRC 18 7.62 22.73 10.14 W3118T 18 7.62 22.73 10.14 W3120TRC 20 7.62 25.27 10.14 W3120T 20 7.62 25.27 10.14 W3122TRC 22 10.16 27.81 12.68 W3122T 22 10.16 27.81 12.68 W3124/3TRC 24 7.62 30.35 10.14 W3124/3T 24 7.62 30.35 10.14 W3124/4TRC 24 10.16 30.35 12.68 W3124/4T 24 10.16 30.35 12.68 W3124TRC 24 15.24 30.35 17.78 W3124T 24 15.25 30.35 17.78 W3128/3TRC 28 7.62 W3128/3T 28 7.62 35.53 10.14 W3128TRC 28 15.24 35.53 17.78 W3128T 28 15.24 35.53 17.78 W3132TRC 32 15.24 40.51 17.78 W3132T 32 15.24 40.51 17.78 W3140TRC 40 15.24 50.67 17.78 W3140T 40 15.24 50.67 17.78 W3142TRC 42 15.24 53.21 17.78 W3142T 42 15.24 53.21 17.78 W3148TRC 48 15.24 60.83 17.78 W3148T 48 15.25 60.83 17.78 W3164TRC 64 22.86 81.15 25.40 W3164T 64 22.86 81.15 25.40 35.53 10.14 Note: Dimensions are subject to change without prior notice. Pins Pitch A B 7.49 10.14 WINSLOW ADAPTICs Data Sheet - Stamped I.C. Sockets W3100TRC W3100T General Specifications. Unless stated all values are typical. Contact Resistance: Current Rating: Capacitance: 10m ohms 10 amp cont. 2.0 amp peak. 0.5pF Material: Phosphor Bronze Plating: W3100TRC Nickel 2.5 microns over Pure Tin 6.0 microns W3100T 60/40 tin/lead 2/3 microns. W3100G Gold in contact area only with solder tail microns over plated Nickel 2.5 Pure Tin 6.0 microns 120/130 grams (1.18/1.27n) per pin 0.01" diameter. 50/70 grams (0.49/0.69n) per pin 0.01" diameter. 0.061" (1.70mm) from top of socket. Insertion Force: Withdrawal Force: Point of contact: Force to remove From moulding: Moulding Material: Insulation Resistance: Arc Resistance: Electrical Strength: Dielectric Constant: Dissipation Factor: Volume Resistively: Operating Temperature: Flammability: sales@winslowadaptics.com Custom Upgrades 1.0lb minimum Glass-reinforced Polyester (PBT) 1010 Ohms (contact to contact) at 500VDC 145 seconds at 23 degrees C 121KV/cm at 23 degrees C 3.9 (48 hrs 90%RH) at 100Hz 23 degrees C 4.5 at 100Hz 121 degrees C 3.7 (48 hrs 90%RH) at 1MHz 23 degrees C 4.3 at 1MHz 121 degrees C 0.0077 (48 hrs 30%RH) at 100Hz 23 degrees C 0.0300 at 100Hz 121 degrees C 0.0150 (48 hrs 30%RH) at 1MHz 23 degrees C 0.0200 at 1MHz 121 degrees C 3 x 1013ohms-CM (48 hrs 90%RH) at 25 degrees C 1013ohms-CM at 121 degrees C -65 to 150 degrees C UL94V-0 DIP Support products from Winslow Adaptics Package Conversion www.winslowadaptics.com Pitch Change Also available from Winslow Adaptics are cost effective, time saving solutions to test, obsolescence, supply problems and upgrades. OEMs can upgrade equipment with custom Adaptics utilising additional logic, often saving considerable cost and time on re-design. If lead-time becomes an issue contact us for a suitable package converter. We specialise in conversion of all package lead-frames.