F-214 (Rev 27MAY14) FTS-110-02-F-DV FTS-111-02-L-DV-SA FTS-122-01-F-DV FTS-116-02-L-D (1,27 mm) .050" FTS SERIES MICRO LOW PROFILE TERMINAL STRIPS SPECIFICATIONS Mates with socket strips or IDC cable Mates with: FFSD, CLP, FLE Low profile (1,27 mm) .050" For complete specifications and recommended PCB layouts see www.samtec.com?FTS OPTIONS Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Operating Temp Range: -55C to +125C Plating: Sn or Au over 50" (1,27 m) Ni RoHS Compliant: Yes Lead-Free Solderable: Yes SMT Lead Coplanarity: .004" (0,10 mm) max RECOGNITIONS -S OPTION -SA OPTION Surface mount or through-hole -P OPTION Shrouded and alignment pin options available Micro pitch .050" x .050" (1,27 mm x 1,27 mm) -TR OPTION Impedance matched for high speed applications For complete scope of recognitions see www.samtec.com/quality FTS 1 NO. PINS PER ROW LEAD STYLE ALSO AVAILABLE (MOQ Required) 02 thru 50 * Alignment pin Contact Samtec. (except -S & -SA option = 05 thru 46) (5,84) .230 No. of positions x .050 (1,27) 02 50 (1,27) .050 (3,42) .135 49 01 (1,27) .050 (2,16) .085 50 01 No of positions x .050 (1,27) + .325 (8,25) = -SA No of positions x .050 (1,27) + .200 (5,08) = - S 46 (4,70) .185 (0,86) .034 Note: Some lengths, styles and options are non-standard, non-returnable. (3,48) .137 01 ROW OPTION OTHER OPTION (-D & -DV only) -01 -F -D = .120" (3,05 mm) Post (Mates with FFSD) = Gold flash on post, Matte Tin on tail = Double Through-hole -02 -L = Double Vertical SMT = 10" (0,25 m) Gold on post, Matte Tin on tail = Single Through-hole = .075" (1,91 mm) Post (Mates with FLE) -SA = End Shroud with Alignment Pin (05 thru 46 positions. Style -02 & -03 only) -DV -S -S = End Shroud (05 thru 46 positions. Style -02 & -03 only) -SV = Single Vertical SMT -03 (4,57) .180 02 PLATING OPTION = .065" (1,65 mm) Post (Mates with CLP) -P (3,56) .140 (1,40) .055 -SA OPTION LEAD A STYLE - 01 (3,05) .120 - 02 (1,91) .075 - 03 (1,65) .065 (1,59) .0625 (1,27) .050 DIA (3,30) .130 X (5,08) .200 (4,06) .160 -P OPTION = Pick & Place Pad (05 positions minimum) -TR = Tape & Reel (-DV only) (Required callout for positions 2 thru 4) 45 (0,41) .016 SQ (2,29) .090 (Shrouded options removed for clarity) -S (1,27) .050 A -SV -D WWW.SAMTEC.COM (3,56) .140 A -DV -S OPTION