BLED112 DATA SHEET Friday, 04 April 2014 Version 1.1 Copyright (c) 2000-2014 Bluegiga Technologies All rights reserved. Bluegiga Technologies assumes no responsibility for any errors which may appear in this manual. Furthermore, Bluegiga Technologies reserves the right to alter the hardware, software, and/or specifications detailed here at any time without notice and does not make any commitment to update the information contained here. Bluegiga's products are not authorized for use as critical components in life support devices or systems. The WRAP is a registered trademark of Bluegiga Technologies The Bluetooth trademark is owned by the Bluetooth SIG Inc., USA and is licensed to Bluegiga Technologies. All other trademarks listed herein are owned by their respective owners. Bluegiga Technologies Oy VERSION HISTORY Version Comment 1.0 First version 1.1 Current consumption added Bluegiga Technologies Oy TABLE OF CONTENTS 1 BLED112 Product Numbering .......................................................................................................................6 2 Electrical Characteristics ...............................................................................................................................7 2.1 Absolute Maximum Ratings ...................................................................................................................7 2.2 Recommended Operating Conditions ....................................................................................................7 2.3 Current Consumption .............................................................................................................................7 3 Block Diagram ...............................................................................................................................................8 4 Certifications ..................................................................................................................................................9 5 4.1 Bluetooth ................................................................................................................................................9 4.2 FCC and IC ............................................................................................................................................9 4.3 Industry Canada .................................................................................................................................. 10 4.4 CE ....................................................................................................................................................... 11 4.5 South-Korea ........................................................................................................................................ 11 4.6 Japan ................................................................................................................................................... 11 4.7 Brazil ................................................................................................................................................... 11 Contact Information .................................................................................................................................... 12 Bluegiga Technologies Oy BLED112 Bluetooth(R) Smart USB Dongle DESCRIPTION BLED112 Bluetooth Smart Dongle integrates all Bluetooth Smart features. The USB dongle can a virtual COM port that enables simple host application development using a simple application programming interface. The BLED112 can be used for Bluetooth Smart development. With two BLED112 dongles you can quickly prototype new Bluetooth Smart application profiles by utilizing Bluegiga Profile ToolkitTM and also automate in module software functions with Bluegiga BGScriptTM . KEY FEATURES: Bluetooth v.4.0, single mode compliant o Supports master and slave modes o Supports up to eight connections Integrated Bluetooth Smart stack o GAP, GATT, L2CAP and SMP o Bluetooth Smart profiles Radio performance o Transmit power : +0 dBm to -27 dBm o Receiver sensitivity: -91 dBm Host interfaces o Figure 1: BLED112 Bluetooth Smart USB dongle USB (virtual emualation) COM port Programmable 8051 processor for standalone operation Simple Bluegiga language for development Bluegiga Profile Toolkit allowing the quick development of GATT based profiles Free Software Development Kit Bluetooth, CE, FCC, IC and South-Korea and Japan qualified BGScript quick TM scripting application TM Bluegiga Technologies Oy 1 BLED112 Product Numbering Available products and product codes Product code Description BLED112 BLED112 USB dongle Bluegiga Technologies Oy Page 6 of 12 2 Electrical Characteristics 2.1 Absolute Maximum Ratings Note: These are absolute maximum ratings beyond which the module can be permanently damaged. These are not maximum operating conditions. The maximum recommended operating conditions are in the table 6. Rating Min Max Unit Storage Temperature -40 +85 C VBUS -0.3 6.5 V Table 1: Absolute Maximum Ratings 2.2 Recommended Operating Conditions Rating Min Max Unit Operationg Temperature Range -40 +85 C VBUS 3.6 5.5 V Table 2: Recommended Operating Conditions 2.3 Current Consumption Rating AVG Idle Peak 12.1 Scan Unit mA 44 mA TX 44 mA RX 33 mA Advertising Table 3: Current Consumption Bluegiga Technologies Oy Page 7 of 12 3 Block Diagram BLED112 is based on TI's CC2540 chip. Embedded 32 MHz and 32.678 kHz crystals are used for clock generation.. 32 MHz XTAL 32.768 kHz XTAL Clock 2V - 3.6V Reset Voltage regulator CC2540 Reset Debug interface Power-on reset SRAM 8051 CPU core and memory arbitrator Flash Analog comparator I/O controller I/O IRQ controller DMA OPAMP Radio arbiter Radio registers Link layer engine SRAM ADC Demodulator Synth Modulator USB USART 0 USART 1 TIMER 1 Receive Frequency synthetisizer Transmit TIMER 2 TIMER 3 Balun + LPF TIMER 4 Ant Figure 2: Simplified block diagram of BLE112 CPU and Memory The 8051 CPU core is a single-cycle 8051-compatible core. It has three different memory access buses (SFR, DATA, and CODE/XDATA), a debug interface, and an 18-input extended interrupt unit. The memory arbiter is at the heart of the system, as it connects the CPU and DMA controller with the physical memories and all peripherals through the SFR bus. The memory arbiter has four memory-access points, access of which can map to one of three physical memories: an SRAM, flash memory, and XREG/SFR registers. It is responsible for performing arbitration and sequencing between simultaneous memory accesses to the same physical memory. The SFR bus is a common bus that connects all hardware peripherals to the memory arbiter. The SFR bus also provides access to the radio registers in the radio register bank, even though these are indeed mapped into XDATA memory space. The 8-KB SRAM maps to the DATA memory space and to parts of the XDATA memory spaces. The SRAM is an ultralow-power SRAM that retains its contents even when the digital part is powered off (power modes 2 and 3). The 128KB flash block provides in-circuit programmable non-volatile program memory for the device, and maps into the CODE and XDATA memory spaces. Bluegiga Technologies Oy Page 8 of 12 4 Certifications 4.1 Bluetooth BLED112 Bluetooth low energy module is Bluetooth qualified and listed as an End Product. 4.2 FCC and IC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help FCC Caution : To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Bluegiga Technologies Oy Page 9 of 12 4.3 Industry Canada IC Statements: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Declaration d'IC : Ce dispositif est conforme aux normes RSS exemptes de licence d'Industrie Canada. Son fonctionnement est assujetti aux deux conditions suivantes : (1) ce dispositif ne doit pas provoquer de perturbation et (2) ce dispositif doit accepter toute perturbation, y compris les perturbations qui peuvent entrainer un fonctionnement non desire du dispositif. Selon les reglementations d'Industrie Canada, cet emetteur radio ne doit fonctionner qu'avec une antenne d'une typologie specifique et d'un gain maximum (ou inferieur) approuve pour l'emetteur par Industrie Canada. Pour reduire les eventuelles perturbations radioelectriques nuisibles a d'autres utilisateurs, le type d'antenne et son gain doivent etre choisis de maniere a ce que la puissance isotrope rayonnee equivalente (P.I.R.E.) n'excede pas les valeurs necessaires pour obtenir une communication convenable. Bluegiga Technologies Oy Page 10 of 12 4.4 CE BLED112 is in conformity with the essential requirements and other relevant requirements of the R&TTE Directive (1999/5/EC). The product is conformity with the following standards and/or normative documents. EMC EN 301 489-17 V.1.3.3 in accordance with EN 301 489-1 V1.8.1 Radiated emissions EN 300 328 V1.7.1 Safety EN 60950-1 4.5 South-Korea BLED112 is certified in South-Korea with certification number: KCC-CRM-BGT-BLED112 4.6 Japan BLED112 has MIC Japan type certification with certification number: 003WWA111471 4.7 Brazil Bluegiga Technologies Oy Page 11 of 12 5 Contact Information Sales: sales@bluegiga.com Technical support: support@bluegiga.com http://techforum.bluegiga.com Orders: orders@bluegiga.com WWW: www.bluegiga.com www.bluegiga.hk Head Office / Finland: Phone: +358-9-4355 060 Fax: +358-9-4355 0660 Sinikalliontie 5A 02630 ESPOO FINLAND Postal address / Finland: P.O. BOX 120 02631 ESPOO FINLAND Sales Office / USA: Phone: +1 770 291 2181 Fax: +1 770 291 2183 Bluegiga Technologies, Inc. 3235 Satellite Boulevard, Building 400, Suite 300 Duluth, GA, 30096, USA Sales Office / Hong-Kong: Phone: +852 3972 2186 Bluegiga Technologies Ltd. Unit 10-18 32/F, Tower 1, Millennium City 1 388 Kwun Tong Road Kwun Tong, Kowloon Hong Kong Bluegiga Technologies Oy Page 12 of 12