Comparison data of conduction noise
Featuring built-in frequency jitter necessary for EMI, while also conserving power
during standby!
High-Performance IPD for Battery Chargers MIP2Kx Series
Overview
MIP2Kx series is a high-performance IPD designed for 15W battery
chargers and featuring built-in frequency jitter function at PWM
control. It features built-in protection circuits necessary for compact
power source charger circuitry. This allows a significant reduction in
externally connected parts. It provides PWM control when a normal
load is applied and intermittent control with low load. This results in
greater efficiency for very low to maximum loads, while also
conserving power during standby.
DIP7-A1
Unit : mm
Feature
•Built-in jitter function
•Built-in charge protection circuit
Built-in overheating, load shorting and overvoltage protection
circuits
Applications
Chargers (for DSC, etc.), AC adapter
New publication, effective from 1 Oct. 2008
M00852BE
Lineup
MIP2K4（with jitter function）
Decentralized pulse by jitter function →Lower the avarage
×Average
Peak
MIP2F4（without jitter function）
Source8
Source7
⎯
6
Drain5
VCC
4
CL3
FB2
VDD
1
Pin NamePin No.
5Ω
1.0AUp to 13WMIP2K5 *2
7Ω
0.70AUp to 10WMIP2K4
10Ω
0.50AUp to 8WMIP2K3
260Hz5.5kHz100kHz
16.5Ω
0.35A
700V
Up to 5WMIP2K2 *2
fM
∆f
foscR(DS)ONILIMITVDSS
Characteristic
Output *1
Type No.
*1 The electric power mentioned above depends on the transformer specification and ambient conditions. The information should be used only as a guide.
When using it within a case, output electric power may be decided by heat of IPD.
*2 All characteristic values are only for reference (still under development).
Frequency jitter function
Electric characteristics (MIP2K4：Worldwide input, 8.3V/1.5A output)
For power supply
• European and American
companies
• Local Asian companies
• Other local companies
•Domestic Japanese
companies
• Japanese companies in
Asia (50% or more owned)
MIP2K□□
ApplicationDisable to supplyAble to supplyParts No.
1) The sale and/or the export of IPD products to any customer or customers located in any country other than Japan is expressly prohibited by the
Agreement made and executed by and between Power Integrations, Inc. and Matsushita Electric Industrial Co., Ltd.
2) IPD products purchased from Matsushita Electric Industrial Co., Ltd., or its authorized agents, hereinafter referred to as Matsushita Electric
Industrial Co., Ltd., shall be used only for production purposes by those parties who have duly purchased IPD products. Those who have purchased
IPD products shall not use such IPD products in unmodified form for re-sale, loan, or sample shipment for evaluation purposes to any other parties.
3) If a party who has duly purchased IPD products subcontracts its production to any other parties, including its subsidiaries or any other third parties
inside and/or out of Japan, and the IPD products are consigned to such subcontracting parties thereat, such party is obligated to monitor and control
the quantity of IPD products to prevent any of the aforementioned re-sale, loan or sample shipments from taking place.
4) In the event that any actual or threatened breach or violation of any of the above mentioned 1, 2, or 3, has occurred or is about to occur, Matsushita
Electric Industrial Co., Ltd. will hold all shipments of IPD products and may request the party alleged to be responsible for such occurrence for
necessary.
VI characteristics of adapter circuit Power efficiency
Vo vs Io
0
1
2
3
4
5
6
7
8
9
0123
Io [A]
Vo [V]
100V
240V
η vs Po
0
20
40
60
80
100
024681012
Po [W]
η [％]
100V
240V
Adapter circuit sample (MIP2K4)
By frequency jitter function, frequency jitter variation(∆f) changes periodically, by frequency of frequency jitter
modulation factor (fM) as shown below.
fosc=100kHz typ, ∆f=5.5kHz typ, fM=260Hz typ
Precautions on the Sales of IPDs
1/fM=1/260Hz
∆f=5.5kHz fosc=100kHz (average value of frequency)
Time
Frequency
Drain current
105.5kHz
94.5kHz
Frequency: High Frequency: Low
*All values are typical
