Memory Back-Up Capacitors NEXT Series FEATURES * SMALLER THAN NEXA SERIES * DOUBLE LAYER CONSTRUCTION * SHORT TERM POWER SOURCE (UP TO 50mA) * SUITABLE FOR FLOW SOLDERING * LEAD-FREE FINISH CHARACTERISTICS Rated Voltage Range Rated Capacitance Range 5.5VDC 0.1F ~ 5.6F (100,000F ~ 5,600,000F) Operating Temp. Range Capacitance Tolerance -40C ~ +85C +80%/-20% (Z) Capacitance Change Load Life Test @ 85C 1,000 hours Super Capacitor Application Guide Maximum ESR Less than 30% of initial measured value Less than 200% of the specified maximum value Less than 200% of the specified maximum value Within +80%/-20% of specified value Less than specified maximum value Less than specified maximum value Less than 20% of initial measured value Less than 120% of the specified maximum value Current at 30 minutes Less than 120% of the specified maximum value Maximum ESR Current at 30 minutes Capacitance Change Temperature Cycling (5 cycles, -40 ~ +85C Maximum ESR Current at 30 minutes Capacitance Change Humidity Resistance (240 hours @ 40C/90% RH) STANDARD VALUES AND SPECIFICATIONS NIC P/N Capacitance Value (F) Charge Discharge Rated Voltage (VDC) Max. Current @ 30 minutes (mA) Max. ESR @ 1KHz () Typical DCR () NEXT104Z5.5V11.5X8.5F 0.10 0.14 5.5 < 0.15 <16 23 NEXT224Z5.5V14.5X12F 0.22 0.28 5.5 <0.33 <10 16 NEXT474Z5.5V16.5X13F 0.47 0.60 5.5 <0.71 <6.5 5.4 NEXT105Z5.5V21.5X13F 1.0 1.3 5.5 <1.5 <3.5 2.9 NEXT225Z5.5V28.5X14F 2.2 2.8 5.5 <3.3 <1.8 2.1 NEXT335Z5.5V36.5X15F 3.3 4.2 5.5 <5.0 <1.0 1.3 NEXT565Z5.5V44.5X17F 5.6 7.2 5.5 <8.4 <0.6 0.8 D 0.5 CASE DIMENSIONS (mm) NIC P/N DIMENSIONS (mm) D H S LL d1 d2 NEXT104Z5.5V11.5X8.5F 11.5 8.5 5.08 4.1 1.0 0.4 1.2 NEXT224Z5.5V14.5X12F 14.5 12.0 5.08 3.4 1.0 0.4 1.2 NEXT474Z5.5V16.5X13F 16.5 13.0 5.08 5.1 1.0 0.4 1.2 NEXT105Z5.5V21.5X13F 21.5 13.0 7.62 4.5 1.5 0.6 1.2 NEXT225Z5.5V28.5X14F 28.5 14.0 10.16 8.0 1.5 0.6 1.4 NEXT335Z5.5V36.5X15F 36.5 15.0 15.0 8.7 2.0 0.6 1.7 NEXT565Z5.5V44.5X17F 44.5 17.0 20.0 7.5 2.0 1.0 1.4 H max. LL - S 0.5 - + + 0.3mm min. TERMINATION FINISH: Pb-FREE (99%Sn/1%Cu) d2 0.1 d1 0.1 PRECAUTIONS WASHING is NOT RECOMMENDED. Additional guidelines and precautions can be found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC's technical support personnel: tpmg@niccomp.com NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1