1
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
Memory Back-Up Capacitors NEXT Series
NIC P/N Capacitance Value (F)
Charge Discharge
Rated Voltage
(VDC)
Max. Current @
30 minutes (mA)
Max. ESR @
1KHz (Ω)
Typical DCR
(Ω)
NEXT104Z5.5V11.5X8.5F 0.10 0.14 5.5 < 0.15 <16 23
NEXT224Z5.5V14.5X12F 0.22 0.28 5.5 <0.33 <10 16
NEXT474Z5.5V16.5X13F 0.47 0.60 5.5 <0.71 <6.5 5.4
NEXT105Z5.5V21.5X13F 1.0 1.3 5.5 <1.5 <3.5 2.9
NEXT225Z5.5V28.5X14F 2.2 2.8 5.5 <3.3 <1.8 2.1
NEXT335Z5.5V36.5X15F 3.3 4.2 5.5 <5.0 <1.0 1.3
NEXT565Z5.5V44.5X17F 5.6 7.2 5.5 <8.4 <0.6 0.8
Rated Voltage Range 5.5VDC
Rated Capacitance Range 0.1F ~ 5.6F (100,000μF ~ 5,600,000μF)
Operating Temp. Range -40°C ~ +85°C
Capacitance Tolerance +80%/-20% (Z)
Load Life Test @ 85°C
1,000 hours
Δ Capacitance Change Less than ±30% of initial measured value
Maximum ESR Less than 200% of the specifi ed maximum value
Current at 30 minutes Less than 200% of the specifi ed maximum value
Temperature Cycling
(5 cycles, -40 ~ +85°C
Δ Capacitance Change Within +80%/-20% of specifi ed value
Maximum ESR Less than specifi ed maximum value
Current at 30 minutes Less than specifi ed maximum value
Humidity Resistance
(240 hours @ 40°C/90% RH)
Δ Capacitance Change Less than ±20% of initial measured value
Maximum ESR Less than 120% of the specifi ed maximum value
Current at 30 minutes Less than 120% of the specifi ed maximum value
NIC P/N DIMENSIONS (mm)
DH S LL d1d2
NEXT104Z5.5V11.5X8.5F 11.5 8.5 5.08 4.1 ± 1.0 0.4 1.2
NEXT224Z5.5V14.5X12F 14.5 12.0 5.08 3.4 ± 1.0 0.4 1.2
NEXT474Z5.5V16.5X13F 16.5 13.0 5.08 5.1 ± 1.0 0.4 1.2
NEXT105Z5.5V21.5X13F 21.5 13.0 7.62 4.5 ± 1.5 0.6 1.2
NEXT225Z5.5V28.5X14F 28.5 14.0 10.16 8.0 ± 1.5 0.6 1.4
NEXT335Z5.5V36.5X15F 36.5 15.0 15.0 8.7 ± 2.0 0.6 1.7
NEXT565Z5.5V44.5X17F 44.5 17.0 20.0 7.5 ± 2.0 1.0 1.4
FEATURES
• SMALLER THAN NEXA SERIES
• DOUBLE LAYER CONSTRUCTION
• SHORT TERM POWER SOURCE (UP TO 50mA)
• SUITABLE FOR FLOW SOLDERING
• LEAD-FREE FINISH
CHARACTERISTICS
STANDARD VALUES AND SPECIFICATIONS
CASE DIMENSIONS (mm)
TERMINATION FINISH:
Pb-FREE (99%Sn/1%Cu)
+
-
H max.
S ±0.5
D ±0.5
LL
0.3mm min.
d1 ±0.1
d2 ±0.1
+
-
Super CapacitorSuper Capacitor
Application GuideApplication Guide
PRECAUTIONS
WASHING is NOT RECOMMENDED. Additional guidelines and precautions
can be found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specifi c application - process details with
NIC’s technical support personnel: tpmg@niccomp.com
