IS: 0401 Amphenol One Piece FC Connectors & Adapters SPECIFICATIONS Connector Loss: 9/125 m fibre, 0.19 dB typical 62.5/125 m fibre, 0.21 dB typical 50/125 m fibre, 0.14 dB typical Return Loss: PC: Polish dependant APC: -65dB max -68dB typical Durability: < 0.11dB after 500 mating cycles Operating Temperature: -40C to +85C Intermateability: Mechanically and optically intermateable with NTT FC type products and conform to JIS C 5970. PART NO DESCRIPTION 944-601-5006 FC/PC, Singlemode 126m, Zirconia PC ferrule 944-601-5306 FC/PC, Singlemode 126m, Zirconia PC ferrule, High Performance Boot FC/PC, Multimode 128m, Zirconia PC ferrule 944-601-5010 SM MM 944-120-6000 FC Connector Singlemode 126m Zirconia PC ferrule Tunable High Performance Boot FC Adapter, Flange Mount, Zirconia Ceramic Alignment Sleeve SM/MM 944-125-6003 FC Adapter, D-Hole, Feed Through, Zirconia Ceramic Alignment Sleeve SM/MM 944-611-5106 SM 954-944-5001 SC/FC Converting Adapter, Zirconia Ceramic Alignment Sleeve SM/MM 944-120-1014 FC Adapter, Captivated Dust Cap SM/MM 944-603-5006 FC/APC, Singlemode 126m, Zirconia stepped ferrule SM 944-603-5606 FC/APC, Singlemode 126m, Zirconia pre angled stepped ferrule SM 944-125-6004 FC/APC Adapter D-Hole Feed Through Zirconia Ceramic Alignment Sleeve NOTES * * * * FIBRE TYPE SM All connectors available in with 125m ferrules All connectors are supplied with 900m and 3.0mm boots All adapters available with phosphor bronze alignment sleeves. Technical drawings available on request. Amphenol Australia Pty Ltd A.C.N. 008 730 925 2 Fiveways Blvd, Keysborough, 3173 Australia Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au http://www.amphenol.com.au SM/MM IS: 0401 Amphenol Small Form Factor (SFF) Connectors & Adapters LC Connectors & Adapters The LC connector range is Bellcore, ANSI/EIA/TIA and IEC compliant. The LC is an inherently reliable, simple and well designed fibre optic interconnect product. SPECIFICATIONS Insertion Loss: 9/125 m fibre , 0.3 dB maximum 62.5/125 m fibre, 0.3 dB maximum Return Loss: 9/125 m, 50 dB typical Durability: <0.2 dB change typical (500 matings) Operating Temperature: -40C to +85 C FEATURES * Audible latch to indicate proper mating * Pull proof * Well suited to high density application and easily duplexed * Fits an RJ-45 footprint MT-RJ Connectors & Adapters SPECIFICATIONS Insertion Loss: 9/125 m fibre, 0.3 dB typical 62.5/125 m fibre, 0.3 dB typical Return Loss: 9/125 m, 40 dB typical Operating Temperature: -40C to +75 C Performance: Performance compliant with ISO/IEC 11801, TIA/EIA 568A and draft Detail Specification for Optical Fibre Connectors. FEATURES * Half the size of duplex SC and ST style connectors * Installable in conventional RJ-45 faceplates and has RJ-45 type latching mechanism * Singlemode and multimode versions for existing and future network applications * Single ferrule reduces the time and complication of assembly since both fibres can be installed and polished at the same time. * Allows for increased port density * Rugged design, meets or exceeds industry standards, with no exposed fibres Amphenol Australia Pty Ltd A.C.N. 008 730 925 2 Fiveways Blvd, Keysborough, 3173 Australia Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au, http://www.amphenol.com.au IS: 0401 Amphenol Small Form Factor (SFF) Connectors & Adapters MU Connectors & Adapters SPECIFICATIONS Insertion Loss: 9/125 m fibre , 0.3 dB maximum 62.5/125 m fibre, 0.3 dB maximum Return Loss: Default Polish 9/125 m, < 50 dB max Ultra Polish 9/125 m, < 55 dB max Durability: <0.1 dB change typical (500 matings) Operating Temperature: -40C to +75 C APPLICATIONS CATV Active device termination Telecommunication networks FEATURES * Free floating ferrule is independent of the backbone, so that a pull on the cable will not cause the ferrule to break contact with a second ferrule in a connection * Push-Pull mating * The MU connector features a precision screw machined body and UL rated plastic housing and boot for consistent performance and durability. * Available in singlemode or multimode. * Fully mateable with NTT-MU type products * Tunable zirconia ceramic ferrule * NTT and JIS compliant SUPPORTING PRODUCT * * * * * Adaptors Simplex Patch Panel and Board mount Duplex Patch Panel and Board mount 8-port Patch Panel and Board mount Hybrid Adaptors MU-LC Adapter MU-SC Adapter MU Backplane Connectors (MU-B) MU Backplane connector housings MU duplex printed circuit board housing MU 8-port printed circuit board housing MU duplex backpanel housing (2.4 or 3.2 mm thickness) MU 8-port backpanel housing (2.4 or 3.2 mm thickness) MU Tools A variety of tools are available to assist in the removal of MU connectors MU duplex printed circuit board housing cleaning tool MU 8-port printed circuit board housing cleaning tool Amphenol Australia Pty Ltd A.C.N. 008 730 925 2 Fiveways Blvd, Keysborough, 3173 Australia Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au, http://www.amphenol.com.au IS: 0401 Amphenol One Piece SC Connectors & Adapters SPECIFICATIONS Connector Loss: 9/125 m fibre, 0.19 dB typical 62.5/125 m fibre, 0.15 dB typical Return Loss: PC < -55 dB APC < -65 dB Durability: < 0.20dB change after 500 mating cycles Operating Temperature: -40C to +85 C Intermateability: Mechanically and optically intermateable with NTT SC type products and conform to JIS C 5973. PART NO DESCRIPTION FIBRE TYPE SM 954-101-5006 SC/PC, Singlemode 126m, Zirconia PC ferrule 954-101-5306 SC/PC, Singlemode 126m, Zirconia PC ferrule, High Performance Boot SM 954-101-5010 SC/PC, Multimode 128m, Zirconia PC ferrule MM 954-101-5011 SC/PC, Multimode 144m, Zirconia PC ferrule MM 954-122-5002 SC Adapter, Multimode, Phosphor Bronze Alignment Sleeve MM 954-120-5000 SC Adapter, Zirconia Ceramic Alignment Sleeve 954-120-5001 SC Adapter, Phosphor Bronze Alignment Sleeve SM/MM 954-944-5000 SC/FC Converting Adapter, Phosphor Bronze Alignment Sleeve SM/MM 954-944-5001 SC/FC Converting Adapter, Zirconia Ceramic Alignment Sleeve SM/MM 954-953-5000 SC/ST Converting Adapter, Zirconia Ceramic Alignment Sleeve SM/MM 954-953-5001 SC/ST Converting Adapter, Phosphor Bronze Alignment Sleeve SM/MM 954-103-5006 SC/APC, Singlemode, 126m , Zirconia ferrule SM 954-103-5606 SC/APC, Singlemode, 126m , Zirconia ferrule, Pre angled SM 954-120-5109 SC/APC Adapter, Singlemode, Zirconia Ceramic Alignment sleeve SM NOTES * All connectors are available with 125m ferrules * All connectors are supplied with 900m and 3.0mm boots * Technical drawings available on request Amphenol Australia Pty Ltd A.C.N. 008 730 925 2 Fiveways Blvd, Keysborough, 3173 Australia Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au http://www.amphenol.com.au SM/MM IS: 0401 Amphenol SC Duplex Connectors & Adapters SPECIFICATIONS Connector Loss: 9/125 m fibre, 0.19 dB typical 62.5/125 m fibre, 0.21 dB typical 50/125 m fibre, 0.14 dB typical Durability: < 0.20dB change after 500 mating cycles Operating Temperature: -40C to +85 C Intermateability: Conform to ANSI X3T9.3 SC specifications and are intermateable. PART NO 954-101-5206 FIBRE TYPE SM 954-101-5210 DESCRIPTION SC Duplex Connector S/mode 126m Zirconia PC Ferrule SC Duplex Connector M/mode 128m Zirconia PC Ferrule 954-101-5211 SC Duplex Connector M/mode 144m Zirconia PC Ferrule MM MM 954-122-5210 SC Duplex Adapter M/mode Phosphor Bronze Alignment Sleeve MM 954-953-5210 SC/ST Duplex Adapter M/mode Phosphor Bronze Alignment Sleeve MM 954-120-5200 SC Duplex Adapter S/mode Zirconia Ceramic Alignment Sleeve SM/MM 954-122-5201 SC Duplex Adapter S/mode Phosphor Bronze Alignment Sleeve SM/MM 954-953-5200 SC/ST Duplex Adapter S/mode Zirconia Ceramic Alignment Sleeve SM/MM NOTES * All connectors available with 125m ferrules * All connectors supplied with 3.0mm boots * Technical drawings available on request Amphenol Australia Pty Ltd A.C.N. 008 730 925 2 Fiveways Blvd, Keysborough, 3173 Australia Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au http://www.amphenol.com.au IS: 0401 Amphenol ST(R) Compatible Connectors & Adapters SPECIFICATIONS Connector Loss: 9/125 m fibre, 0.19 dB typical 62.5/125 m fibre, 0.13 dB typical 50/125 m fibre, 0.14 dB typical 100/140 m fibre, 0.10 dB typical Durability: < 0.10dB change after 1000 mating cycles Operating Temperature: -40C to +85 C ST(R) and ST II (R) are registered trademarks of AT&T PART NO Intermateability: Optically and mechanically compatible with AT&T ST, STII connectors and their functional equivalents. DESCRIPTION 953-101-5006 ST Connector, Singlemode 126m, Zirconia PC ferrule, Yellow 953-101-5008 ST Connector, Singlemode 128m, Zirconia PC ferrule, Blue SM 953-101-5010 ST Connector, Multimode 128m, Zirconia PC ferrule, Black MM 953-101-5011 953-122-5000 ST Connector, Multimode 144m, Zirconia PC ferrule, Grey ST Adapter, Polymer Body, Phosphor Bronze Alignment Sleeve, Beige SM/MM 953-120-5000 ST Adapter, Polymer Body, Zirconia Ceramic Alignment Sleeve, Black SM/MM 954-953-5000 SC-ST Converting Adapter, Zirconia Ceramic Alignment Sleeve SM/MM 954-953-5001 SC-ST Converting Adapter, Phosphor Bronze Alignment Sleeve SM/MM NOTES * * * * * FIBRE TYPE SM Connector body and coupling nut are precision molded from a flame retardant, glass filled polymer. The connector body is colour coded to indicate singlemode or multimode and ferrule size All connectors available with 125m ferrules All connectors are supplied with 900m and 3.0mm boots Technical drawings available on request Amphenol Australia Pty Ltd A.C.N. 008 730 925 2 Fiveways Blvd, Keysborough, 3173 Australia Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au, http://www.amphenol.com.au MM IS: 0401 Amphenol ST(R) Compatible (s/steel ferrule) Connectors & Adapters SPECIFICATIONS Connector Loss: 62.5/125 m fibre, 0.35 dB typical Durability: < 0.03dB change after 500 mating cycles Operating Temperature: -40C to +85 C Intermateability: Optically and mechanically compatible with AT&T ST, STII connectors and their functional equivalents. ST(R) and STII(R) are trademarks of AT&T PART NO DESCRIPTION FIBRE TYPE MM 953-102-5001 ST connector, polymeric body & Coupling Nut 128m S/steel ferrule 953-102-5002 ST connector, polymeric body & Coupling Nut 144m S/steel ferrule ST connector, polymeric body & Coupling Nut 231m S/steel ferrule MM 953-102-5004 951-102-5005 ST connector, polymeric body & Coupling Nut 436m S/steel ferrule MM MM 953-102-5301 ST connector, metal body & Coupling Nut 128m S/steel ferrule ST connector, metal body & Coupling Nut 144m S/steel ferrule 953-102-5003 953-102-5302 953-102-5303 ST connector, polymeric body & Coupling Nut 641m S/steel ferrule ST connector, metal body & Coupling Nut 231m S/steel ferrule NOTES * All connectors are supplied with 900m and 3.0mm boots * Custom hole sizes can be drilled to accommodate non standard fibres * Technical drawings can be supplied on request Amphenol Australia Pty Ltd A.C.N. 008 730 925 2 Fiveways Blvd, Keysborough, 3173 Australia Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au http://www.amphenol.com.au MM MM MM MM IS: 0401 Amphenol ST II(R) Compatible Connectors & Adapters SPECIFICATIONS Connector Loss: 9/125 m fibre, 0.19 dB typical 62.5/125 m fibre, 0.13 dB typical 50/125 m fibre, 0.14 dB typical 100/140 m fibre, 0.10 dB typical Durability: < 0.10dB after 1000 mating cycles Operating Temperature: -40C to +85 C Intermateability: Optically and mechanically compatible with AT&T ST, STII connectors and their functional equivalents. ST(R) and STII(R) are trademarks of AT&T PART NO 953-101-5306 953-101-5308 953-101-5310 953-101-5311 953-120-5003 953-122-5003 953-1061 ST ST ST ST ST ST ST DESCRIPTION Connector, Singlemode 126m, Zirconia PC ferrule, Die Cast Connector, Singlemode 128m, Zirconia PC ferrule, Die Cast Connector, Multimode 128m, Zirconia PC ferrule, Die Cast Connector, Multimode 144m, Zirconia PC ferrule, Die Cast Adapter, Die Cast, Zirconia Ceramic Alignment Sleeve Adapter, Die Cast, Phosphor Bronze Alignment Sleeve Dust Cap and Chain NOTES * All connectors available with 125m ferrules * Connectors supplied with 900m and 3.0mm boots * Technical drawing available on request Amphenol Australia Pty Ltd A.C.N. 008 730 925 2 Fiveways Blvd, Keysborough, 3173 Australia Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au http://www.amphenol.com.au FIBRE TYPE SM SM MM MM MM SM/MM -