Amphenol
One Piece FC Connectors & Adapters
SPECIFICATIONS
Connector Loss: 9/125 µm fibre, 0.19 dB typical
62.5/125 µm fibre, 0.21 dB typical
50/125 µm fibre, 0.14 dB typical
Return Loss: PC: Polish dependant
APC: -65dB max -68dB typical
Durability:<
0.11dB after 500 mating cycles
Operating Temperature:
-40°C to +85°C
Intermateability: Mechanically and optically intermateable
with NTT FC type products and conform
to JIS C 5970.
Amphe nol Australia P ty Ltd A.C.N. 008 730 925
2 Fiveways Blvd, Keysborough, 3173 Australia
Tel: +61 3 87 96 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au http:// www.a mphenol.com.a u
IS: 0401
PART NO DESCRIPTION FIBRE
TYPE
944-601-5006 FC/PC, Singlemode 126µm, Zirconia PC ferrule SM
944-601-5306 FC/PC, Singlemode 126µm , Zirconia PC ferrule, High Performance Boot SM
944-601-5010 FC/PC, Multimode 128µm, Zirconia PC ferrule MM
944-611-5106 FC Connector Singlemode 126µm Zirconia PC ferrule Tunable High
Performance Boot SM
944-120-6000 FC Adapter, Flange Mount, Zirconia Ceramic Alignment Sleeve SM/MM
944-125-6003 FC Adapter, D-Hole, Feed Through, Zirconia Ceramic Alignment Sleeve SM/MM
954-944-5001 SC/FC Converting Adapter, Zirconia Ceramic Alignment Sleeve SM/MM
944-120-1014 FC Adapter, Captivated Dust Cap SM/MM
944-603-5006 FC/APC , Singlemode 126µm, Zirconia stepped ferrule SM
944-603-5606 FC/APC , Singlemode 126µm, Zirconia pre angled stepped ferrule SM
944-125-6004 FC/APC Adapter D-Hole Feed Through Zirconia Ceramic Alignment Sleeve SM/MM
NOTES
• All connectors available in with 125µm ferrules
• All connectors are supplied with 900µm and 3.0mm boots
• All adapters available with phosphor bronze alignment sleeves.
• Technical drawings available on request.
Amphenol
SPECIFICATIONS
Insertion Loss: 9/125 µm fibre , 0.3 dB maximum
62.5/125 µm fibre, 0.3 dB maximum
Return Loss: 9/125 µm, 50 dB typical
Durability: <0.2 dB change typical (500 matings)
Operating Temperature:
-40°C to +85 °C
The LC connector range is Bellcore, ANSI/EIA/TIA and
IEC compliant. The LC is an inherently reliable, simple
and well designed fibre optic interconnect product.
Small Form Factor (SFF) Connectors & Adapters
Amphe nol Australia P ty Ltd A.C.N. 008 730 925
2 Fiveways Blvd, Keysborough, 3173 Australia
Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au, http://www.amphenol.com.au
IS: 0401
MT-RJ Connectors & Adapters
SPECIFICATIONS
Insertion Loss: 9/125 µm fibre, 0.3 dB typical
62.5/125 µm fibre, 0.3 dB typical
Return Loss: 9/125 µm, 40 dB typical
Operating Temperature:
-40°C to +75 °C
Performance: Performance compliant with
ISO/IEC 11801, TIA/EIA 568A and
draft Detail Specification for Optical
Fibre Connectors.
FEATURES
• Half the size of duplex SC and ST style connectors
• Installable in conventional RJ-45 faceplates and has RJ-45 type latching mechanism
• Singlemode and multimode versions for existing and future network applications
• Single ferrule reduces the time and complication of assembly since both fibres can be installed and polished at the
same time.
• Allows for increased port density
• Rugged design, meets or exceeds industry standards, with no exposed fibres
LC Connectors & Adapters
FEATURES
• Audible latch to indicate proper mating
• Pull proof
• Well suited to high density application and easily duplexed
• Fits an RJ-45 footprint
Amphenol
SPECIFICATIONS
Insertion Loss: 9/125 µm fibre , 0.3 dB maximum
62.5/125 µm fibre, 0.3 dB maximum
Return Loss: Default Polish 9/125 µm, < 50 dB max
Ultra Polish 9/125 µm, < 55 dB max
Durability: <0.1 dB change typical (500 matings)
Operating Temperature:
-40°C to +75 °C
APPLICATIONS
CATV
Active device termination
Telecommunication networks
Small Form Factor (SFF) Connectors & Adapters
Amphe nol Australia P ty Ltd A.C.N. 008 730 925
2 Fiveways Blvd, Keysborough, 3173 Australia
Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au, http://www.amphenol.com.au
IS: 0401
MU Connectors & Adapters
FEATURES
• Free floating ferrule is independent of the backbone, so that a pull on the cable will not cause the ferrule to break
contact with a second ferrule in a connection
• Push-Pull mating
• The MU connector features a precision screw machined body and UL rated plastic housing and boot for
consistent performance and durability.
• Available in singlemode or multimode.
• Fully mateable with NTT-MU type products
• Tunable zirconia ceramic ferrule
• NTT and JIS compliant
SUPPORTING PRODUCT
• Adaptors
Simplex Patch Panel and Board mount
Duplex Patch Panel and Board mount
8-port Patch Panel and Board mount
• Hybrid Adaptors
MU-LC Adapter
MU-SC Adapter
• MU Backplane Connectors (MU-B)
• MU Backplane con nec tor housings
MU duplex printed circuit board housing
MU 8-port printed circuit board housing
MU duplex backpanel housing (2.4 or 3.2 mm thickness)
MU 8-port backpanel housing (2.4 or 3.2 mm thickness)
• MU Tools
A variety of tools are available to assist in the removal of MU connectors
MU duplex printed circuit board housing cleaning tool
MU 8-port printed circuit board housing cleaning tool
Amphenol
SPECIFICATIONS
Connector Loss: 9/125 µm fibre, 0.19 dB typical
62.5/125 µm fibre, 0.15 dB typical
Return Loss: PC < -55 dB
APC < -65 dB
Durability: < 0.20dB change after 500
mating cycles
Operating Temperature:
-40°C to +85 °C
Intermateability: Mechanically and optically
intermateable with NTT SC type
products and conform to JIS C 5973.
One Piece SC Connectors & Adapters
Amphe nol Australia P ty Ltd A.C.N. 008 730 925
2 Fiveways Blvd, Keysborough, 3173 Australia
Tel: +61 3 87 96 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au http:// www.a mph enol.com.au
IS: 0401
PART NO DESCRIPTION FIBRE
TYPE
954-101-5006 SC/PC , Singlemode 126µm, Zirconia PC ferrule SM
954-101-5306 SC/PC , Singlemode 126µm, Zirconia PC ferrule, High Performance Boot SM
954-101-5010 SC/PC , M ultimode 128µm, Zirconia PC ferrule MM
954-101-5011 SC/PC , M ultimode 144µm, Zirconia PC ferrule MM
954-122-5002 SC A dapter, Multimode, Phosphor Bronze Alignment Sleeve MM
954-120-5000 SC A dapter, Zirconia Ceramic Alignm ent Sleeve SM /M M
954-120-5001 SC A dapter, Phosphor Bronze Alignm ent Sleeve SM /M M
954-944-5000 SC/FC C onverting Adapter, Phosphor Bronze Alignm en t Sleeve SM /M M
954-944-5001 SC/FC C onverting A dapter, Zirconia Ceramic Alignment S leeve SM /M M
954-953-5000 SC/ST C onverting Adapter, Zirconia Ceramic Alignm en t Sleeve SM /M M
954-953-5001 SC/ST C onverting Adapter, Phosphor Bronze Alignm ent S leeve SM /M M
954-103-5006 SC/AP C , Singlemode, 126µm , Zirconia ferrule SM
954-103-5606 SC/AP C , Singlemode, 126µm , Zirconia ferrule, Pre angled SM
954-120-5109 SC/AP C A dapter, Singlem ode, Zirconia Ceram ic Alignment sleeve SM
NOTES
• All connectors are available with 125µm ferrules
• All connectors are supplied with 900µm and 3.0mm boots
• Technical drawings available on request
Amphenol
SPECIFICATIONS
Connector Loss: 9/125 µm fibre, 0.19 dB typical
62.5/125 µm fibre, 0.21 dB typical
50/125 µm fibre, 0.14 dB typical
Durability: < 0.20dB change after 500
mating cycles
Operating Temperature:
-40°C to +85 °C
Intermateability: Conform to ANSI X3T9.3 SC
specifications and are intermateable.
SC Duplex Connecto rs & Adapters
Amphe nol Australia P ty Ltd A.C.N. 008 730 925
2 Fiveways Blvd, Keysborough, 3173 Australia
Tel: +61 3 87 96 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au http:// www.a mphenol.com.a u
IS: 0401
PART NO DESCRIPTION FIBRE TYPE
954-101-5206 SC Duplex Connector S/mode 126∝m Zirconia PC Ferrule SM
954-101-5210 SC Duplex Connector M/mode 128∝m Zirconia PC Ferrule MM
954-101-5211 SC Duplex Connector M/mode 144∝m Zirconia PC Ferrule MM
954-122-5210 SC Duplex Adapter M/mode Phosphor Bronze Alignment Sleeve MM
954-953-5210 SC/ST Duplex Adapter M/mode Phosphor Bronze Alignment Sleeve MM
954-120-5200 SC Duplex Adapter S/mode Zirconia Ceramic Alignment Sleeve SM/MM
954-122-5201 SC Duplex Adapter S/mode Phosphor Bronze Alignment Sleeve SM/MM
954-953-5200 SC/ST Duplex Adapter S/mode Zirconia Ceramic Alignment Sleeve SM/MM
NOTES
• All connectors available with 125µm ferrules
• All connectors supplied with 3.0mm boots
• Technical drawings available on request
Amphenol
SPECIFICATIONS
Connector Loss: 9/125 µm fibre, 0.19 dB typical
62.5/125 µm fibre, 0.13 dB typical
50/125 µm fibre, 0.14 dB typical
100/140 µm fibre, 0.10 dB typical
Durability: < 0.10dB change after 1000 mating
cycles
Operating Temperature:
-40°C to +85 °C
Intermateability: Optically and mechanically
compatible with AT&T ST, STII
connectors and their functional
equivalents.
ST® Compatible Connectors & Adapters
Amphe nol Australia P ty Ltd A.C.N. 008 730 925
2 Fiveways Blvd, Keysborough, 3173 Australia
Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au, http://www.amphenol.com.au
ST® and ST II ® are registered trademarks of AT&T
IS: 0401
PART NO DESCRIPTI ON FI BRE
TYPE
953-101-5006 ST Connector, Singlemode 126µm, Zirco nia PC ferrule , Ye llow SM
953-101-5008 ST Connector, Singlemode 128µm, Zirco nia PC ferrule , Bl ue SM
953-101-5010 ST Connector, Multimode 128µm, Zirconia PC ferrule , Bl ack MM
953-101-5011 ST Connector, Multimode 144µm, Zirconi a PC fe rrule, Grey MM
953-122-5000 ST Adapter, Polymer Body , Phosphor Bronze Alignm ent Sleeve, Beige SM/MM
953-120-5000 ST Adapter, Polymer Body , Zi rc onia Cera mic Alignmen t Sl eeve, Blac k SM/MM
954-953-5000 SC-ST Converting Adapter, Zirconia Ceramic Alignment Sleeve SM/MM
954-953-5001 SC-ST Converting Adapter, Phosphor Bronze Alignment Sleeve SM/MM
NOTES
• Connector body and coupling nut are precision molded from a flame retardant, glass filled polymer.
• The connector body is colour coded to indicate singlemode or multimode and ferrule size
• All connectors available with 125µm ferrules
• All connectors are supplied with 900µm and 3.0mm boots
• Technical drawings available on request
Amphenol
SPECIFICATIONS
Connector Loss: 62.5/125 µm fibre, 0.35 dB typical
Durability: < 0.03dB change after 500
mating cycles
Operating Temperature:
-40°C to +85 °C
Intermateability: Optically and mechanically
compatible with AT&T ST, STII
connectors and their functional
equivalents.
ST® Compatible (s/steel ferrule) Connectors & Adapters
Amphe nol Australia P ty Ltd A.C.N. 008 730 925
2 Fiveways Blvd, Keysborough, 3173 Australia
Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info@amphenol.com.au ht tp://www.amph enol.com.au
ST® and STII® are trade mark s of AT&T
IS: 0401
NOTES
• All connectors are supplied with 900µm and 3.0mm boots
• Custom hole sizes can be drilled to accommodate non standard fibres
• Technical drawings can be supplied on request
PART NO DESCRIPTION FIBR E
TYPE
953-102-5001 ST connector, polymeric body & Coupling Nut 128µm S/steel ferrule MM
953-102-5002 ST connector, polymeric body & Coupling Nut 144µm S/steel ferrule MM
953-102-5003 ST connector, polymeric body & Coupling Nut 231µm S/steel ferrule MM
953-102-5004 ST connector, polymeric body & Coupling Nut 436µm S/steel ferrule MM
951-102-5005 ST connector, polymeric body & Coupling Nut 641µm S/steel ferrule MM
953-102-5301 ST c onnector, metal body & Coupling Nut 128µm S/steel ferrule MM
953-102-5302 ST c onnector, metal body & Coupling Nut 144µm S/steel ferrule MM
953-102-5303 ST c onnector, metal body & Coupling Nut 231µm S/steel ferrule MM
Amphenol
SPECIFICATIONS
Connector Loss: 9/125 µm fibre, 0.19 dB typical
62.5/125 µm fibre, 0.13 dB typical
50/125 µm fibre, 0.14 dB typical
100/140 µm fibre, 0.10 dB typical
Durability: < 0.10dB after 1000 mating cycles
Operating Temperature:
-40°C to +85 °C
Intermateability: Optically and mechanically
compatible with AT&T ST, STII
connectors and their functional
equivalents.
ST II® Compatible Co nnectors & Adap ters
Amphe nol Australia P ty Ltd A.C.N. 008 730 925
2 Fiveways Blvd, Keysborough, 3173 Australia
Tel: +61 3 8796 8888 Fax: +61 3 8796 8801 Email: info
@
am
p
henol . com.au htt
p
://www.am
p
henol.com.au
ST® and STII® are trade mark s of AT&T
IS: 0401
PART NO DESCRIPTION FIBRE TYPE
953-101-5306 ST Connector, Singlemode 126µm, Zirconia PC ferrule, Die Cast SM
953-101-5308 ST Connector, Singlemode 128µm, Zirconia PC ferrule, Die Cast SM
953-101-5310 ST Connector, Multimode 128µm, Zirconia PC ferrule, Die Cast MM
953-101-5311 ST Connector, Multimode 144µm, Zirconia PC ferrule, Die Cast MM
953-120-5003 ST Adapter, Di e Cast, Zirconia Ceramic Alignment Sleeve MM
953-122-5003 ST Adapter, Di e Cast, Phosphor Bronze Alignment Sleeve SM/MM
953-1061 ST Dust Cap and Chain -
NOTES
• All connectors available with 125µm ferrules
• Connectors supplied with 900µm and 3.0mm boots
• Technical drawing available on request
