SN54/74LS145 1-OF-10 DECODER/DRIVER OPEN-COLLECTOR The SN54 / 74LS145, 1-of-10 Decoder/Driver, is designed to accept BCD inputs and provide appropriate outputs to drive 10-digit incandescent displays. All outputs remain off for all invalid binary input conditions. It is designed for use as indicator/relay drivers or as an open-collector logic circuit driver. Each of the high breakdown output transistors will sink up to 80 mA of current. Typical power dissipation is 35 mW. This device is fully compatible with all TTL families. * Low Power Version of 54 / 74145 * Input Clamp Diodes Limit High Speed Termination Effects 1-OF-10 DECODER/ DRIVER OPEN-COLLECTOR LOW POWER SCHOTTKY J SUFFIX CERAMIC CASE 620-09 CONNECTION DIAGRAM DIP (TOP VIEW) 16 1 N SUFFIX PLASTIC CASE 648-08 16 PIN NAMES P0, P1, P2, P3 Q0 to Q9 1 D SUFFIX SOIC CASE 751B-03 LOADING (Note a) BCD Inputs Outputs (Note b) HIGH LOW 0.5 U.L. Open Collector 0.25 U.L. 15 (7.5) U.L. NOTES: a) 1 TTL Unit Load (U.L.) = 40 A HIGH/1.6 mA LOW. b) The Output LOW drive factor is 2.5 U.L. for Military (54) and 15 U.L. for Commercial (74) Temperature Ranges. LOGIC DIAGRAM 16 1 ORDERING INFORMATION SN54LSXXXJ SN74LSXXXN SN74LSXXXD Ceramic Plastic SOIC LOGIC SYMBOL FAST AND LS TTL DATA 5-240 SN54/74LS145 TRUTH TABLE INPUTS OUTPUTS P3 P2 P1 P0 Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9 L L L L L L L L H H H H H H H H L L L L H H H H L L L L H H H H L L H H L L H H L L H H L L H H L H L H L H L H L H L H L H L H L H H H H H H H H H H H H H H H H L H H H H H H H H H H H H H H H H L H H H H H H H H H H H H H H H H L H H H H H H H H H H H H H H H H L H H H H H H H H H H H H H H H H L H H H H H H H H H H H H H H H H L H H H H H H H H H H H H H H H H L H H H H H H H H H H H H H H H H L H H H H H H H H H H H H H H H H L H H H H H H H = HIGH Voltage Level L = LOW Voltage Level GUARANTEED OPERATING RANGES Symbol Parameter Min Typ Max Unit VCC Supply Voltage 54 74 4.5 4.75 5.0 5.0 5.5 5.25 V TA Operating Ambient Temperature Range 54 74 - 55 0 25 25 125 70 C VOH Output Voltage -- High 54, 74 15 V IOL Output Current -- Low 54 74 12 24 mA FAST AND LS TTL DATA 5-241 SN54/74LS145 DC CHARACTERISTICS OVER OPERATING TEMPERATURE RANGE (unless otherwise specified) Limits Symbol Parameter Min VIH Input HIGH Voltage VIL Input LOW Voltage VIK Input Clamp Diode Voltage IOH Output HIGH Current VOL Input HIGH Current IIL Input LOW Current ICC Power Supply Current Max Unit V V Guaranteed Input LOW Voltage for All Inputs - 1.5 V VCC = MIN, IIN = - 18 mA 54 0.7 74 0.8 - 0.65 Test Conditions Guaranteed Input HIGH Voltage for All Inputs 2.0 250 A VCC = MIN, VOH = MAX 54, 74 0.25 0.4 V IOL = 12 mA 74 0.35 0.5 V IOL = 24 mA 54, 74 2.3 3.0 V IOL = 80 mA 20 A VCC = MAX, VIN = 2.7 V 54, 74 Output LOW Voltage IIH Typ VCC = VCC MIN, VIN = VIL or VIH per Truth Table 0.1 mA VCC = MAX, VIN = 7.0 V - 0.4 mA VCC = MAX, VIN = 0.4 V 13 mA VCC = MAX, VIN = GND AC CHARACTERISTICS (TA = 25C) Limits Symbol tPHL tPLH Parameter Min Typ Propagation Delay Pn Input to Qn Output Max Unit Test Conditions 50 50 ns VCC = 5.0 V CL = 45 pF AC WAVEFORMS Figure 1 Figure 2 FAST AND LS TTL DATA 5-242 Case 751B-03 D Suffix 16-Pin Plastic SO-16 -A- "! ! " " ! " # 1 %# ) ! !" $ !" 8 C -T- D M K " ! #! J F ! Case 648-08 N Suffix 16-Pin Plastic R X 45 G " ! ) #! P ! " " 9 -B- ! 16 & ! ! ( ( ( ( "! ! " " ! ! ' " " ! ' ! " # & -A- 16 9 1 8 ! ! $ ! B # ) " ! " # ) !" $ !" ) F L C S -T- K H G M J D " Case 620-09 J Suffix 16-Pin Ceramic Dual In-Line -A- ! ! ! ! "! ! " 16 " ) " L K M N J G D " $ " $ ! " " ! ! FAST AND LS TTL DATA 5-243 & # ) !" $ !" ) -T $ " " C F & 8 E ! ! ! " " -B1 & 9 * * ! ! ! ! * * ! ! Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. FAST AND LS TTL DATA 5-244