REVISIONS REV ECO B1 - DESCRIPTION DATE RELEASE NEW DWG FORMAT 08/14/14 BY APPR DRACK TOMMY TITLE: o26.0 61.4 REF. 23.8 77.3 REF. 3. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. RTHP6141S*H-25PSx 5. CONTACT P/N: HS25BCS o29.3 o26.8 4. "*" DENOTE KEY POSTION OF "N","W","X","Y" OR "Z". REV: RTHP6141S*H-25PSx XXXX DWG NO: 2. SPECIFICATIONS: 2.1 CURRENT RATING: 120 AMPS MAX. 2.2 VOLTAGE RATING: 630 V AC/DC 2.3 OPERATING TEMPERATURE: -40C TO +125C 2.4 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT lEAKAGE @ 5000 VOLTS AC 2.5 DEGREE OF PROTECTION: IP67 (MATED CONDITION) 2.6 DEGREE OF POLLUTION: 3 PER UL840 2.7 OVERVOLTAGE CATEGORY: III PER UL840 2.8 MATING CYCLE DURABILITY: >100 CYCLES 2.9 RoHS COMPLIANT 18.0 24.5 ECO-MATE,PLUG,6mm RADSOK,CRIMP TYPE,SHIELDING,CORD GRIP NOTES: 1. MATERIAL: 1.1 HOUSING BODY: ZINC DIE-CAST, NICKEL PLATED 1.2 COUPLING NUT: AL ALLOY, NICKEL PLATED 1.3 INSULATION INSERT: PA66,UL94 V0 1.4 CONTACT: COPPER ALLOY, SILVER PLATED 1.5 SEAL: SILICONE RUBBER B1 SH: 1 PART NO. N RTHP6141SNH-25PS2 W RTHP6141SWH-25PS2 X RTHP6141SXH-25PS2 Y RTHP6141SYH-25PS2 3) Note reference = Z RTHP6141SZH-25PS2 MATERIAL SPECIFICATIONS: QUANTITY UNLESS OTHERWISE SPECIFIED 13.5~14.0 mm 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC 0.30 Fractions 1/64 PL DEC 0.15 Angles 1 PL DEC 0.08 X SIGNATURES DRAWN: Drack Amphenol DATE 08/14/14 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: ECO-MATE,PLUG,6mm RADSOK, CRIMP TYPE,SHIELDING,CORD GRIP CUSTOMER: PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: ITEM 3:2 DWG NO: REVISION RTHP6141S*H-25PSx B1 SHEET 1 OF 1 1 KEY POS OF: Cable OD Range SEE PART NUMBER CHART DESCRIPTION PART NUMBER MATERIALS LIST