SinglFuseTM SF-0603HIxxxF Series Features n Single blow fuse for overcurrent n n n n n n Surface mount packaging for automated protection 1608 (EIA 0603) miniature footprint High inrush current withstand fuse UL 248-14 listed RoHS compliant* and halogen free** Thin film chip design assembly SF-0603HIxxxF Series - High Inrush Current Withstand Surface Mount Fuses Electrical Characteristics Model SF-0603HI050F-2 SF-0603HI075F-2 SF-0603HI100F-2 SF-0603HI150F-2 SF-0603HI200F-2 SF-0603HI250F-2 SF-0603HI300F-2 SF-0603HI350F-2 SF-0603HI400F-2 Rated Current (Amps) 0.50 0.75 1.00 1.50 2.00 2.50 3.00 3.50 4.00 Fusing Time Open within 60 sec. at 200 % rated current Resistance () Typ.*** 0.1550 0.0830 0.0500 0.0290 0.0200 0.0165 0.0140 0.0120 0.0095 Rated Voltage Interrupting Rating DC 65 V AC/DC 35 V 50 A DC 65 V 13 A DC 35 V AC/DC 35 V 35 A AC/DC 24 V 50 A Typical I2t (A2s) **** 0.019 0.036 0.052 0.110 0.310 0.400 0.600 0.800 1.200 *** Resistance value measured with 10 % rated current at 25 C ambient. Tolerance 25 %. **** Melting I2t calculated at 0.001 second pre-arcing time. Reliability Testing No. Test Requirement 1 A: DCR change 10 % >1 A: DCR change 20 % Test Condition 1 Bending 2 Solderability Minimum 95 % coverage One dip at 255 C for 5 seconds 3 Thermal shock DCR change 10 % No mechanical damage 100 cycles between -55 C and +125 C 4 Moisture resistance 5 Salt spray 6 Mechanical vibration 7 Mechanical shock DCR change 10 % No mechanical damage 8 Life No electrical "opens" during testing Voltage drop change shall be less than 10 % of initial value DCR change 10 % No excessive corrosion DCR change 10 % No excessive corrosion DCR change 10 % No mechanical damage 2 mm 10 cycles 48 hour exposure, 5 % salt solution 0.4 inch D.A. or 30 G between 5-3000 Hz Test Reference Refer to STP document MIL-STD-202 Method 208 MIL-STD-202 Method 107 MIL-STD-202 Method 106 MIL-STD-202 Method 101 MIL-STD-202 Method 204 1500 G, 0.5 ms, half-sine shocks MIL-STD-202 Method 213 75 % rated current for 2000 hours at ambient temperature between +20 C and +30 C Refer to STP document Agency Recognition UL File Number...................................................................E198545 WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. ** Bourns considers a product to be "halogen free" if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. "SinglFuse" is a trademark of Bourns, Inc. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SinglFuseTM SF-0603HIxxxF Series Applications n Portable memory n Cell phones n LED lighting n LCD monitors n Rechargeable battery packs n Power tools n Disk drives n Battery chargers n PDAs n Set-top boxes n Digital cameras n Industrial controllers n MP3 players n Battery Management Systems (BMS) SF-0603HIxxxF Series - High Inrush Current Withstand Surface Mount Fuses Environmental Characteristics Operating Temperature................................................................................................................................................................... -55 C to +90 C Storage Conditions Temperature............................................................................................................................................................................... +5 C to +35 C Humidity.........................................................................................................................................................................................40 % to 75 % Shelf Life..........................................................................................................................................................2 years from manufacturing date Moisture Sensitivity Level....................................................................................................................................................................................... 1 ESD Classification (HBM)............................................................................................................................................................................ Class 6 Typical Part Marking How to Order Represents total content. Layout may vary. SF - 0603 HI 015 F - 2 PCB CuNi/Sn SinglFuseTM Product Designator SMD Footprint 0603 = 1608 (EIA 0603) size F Fuse Blow Type HI = High Inrush Current Withstand RATED CURRENT (A) C = 0.50 J = 2.50 D = 0.75 L = 3.00 E = 1.00 N = 3.50 T = 1.50 P = 4.00 F = 2.00 Rated Current 050 ~ 400 (500 mA ~ 4.0 A) Structure Type F = Thin film Cu/Sn EPOXY 1.60 0.10 (.063 .004) Packaging Quantity Packaging Type - 2 = Tape & Reel 0.81 0.10 (.032 .004) 1.60 0.10 (.063 .004) 1.60 0.10 (.063 .004) 0.36 0.10 (.014 .004) 0.80 (.031) 0.36 0.10 0.81 0.10 (.014 .004) (.032 .004) 0.36 0.10 (.014 .004) 0.36 0.10 Recommended Pad Layout 0.80 (.031) 0.36 DIMENSIONS: 0.10 0.36 0.10 MM (INCHES) (.014 .004) (.014 .004) 0.81 0.10 (.032 .004) 0.36 0.36 0.10 0.10 (.014(.014 .004) .004) 0.80 (.031) 8,000 pieces per 7-inch reel Product Dimensions 0.36 0.10 (.014 .004) Construction 1.00 (.039) 2.20 (.087) 1.00 (.039) 2.20 0.36 0.10 (.087) (.014 .004) 2.20 (.087) 0.36 0.10 (.014 .004) Current Rating Thermal(.014 Derating .004) Curve 140 120 0.36 0.10 (.014 .004) DERATING (%) 0.36 0.10 (.014 .004) 0.36 0.10 (.014 .004) 100 0.36 0.10 (.014 .004) 80 60 40 20 0 -60 -40 -20 0 20 40 60 80 100 MAXIMUM OPERATING TEMPERATURE (C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 1.00 (.039) SF-0603HIxxxF Series - High Inrush Current Withstand Surface Mount Fuses Solder Reflow Recommendations Tp MAX. RAMP UP RATE = 3 C/s MAX. RAMP DOWN RATE = 6 C/s TEMPERATURE (C) TL Tsmax tp Profile Feature Preheat / Soak: Temperature Min. (Tsmin) Temperature Max. (Tsmax) Time (ts) from (Tsmin to Tsmax) Tc -5 C tL PREHEAT AREA Pb-Free Assembly 150 C 200 C 60~120 seconds Ramp Up Rate (TL to Tp) 3 C / second max. Liquidous Temperature (TL) Time (tL) maintained above TL Tsmin ts 217 C 60~150 seconds Peak Package Body Temperature (Tp) 25 TIME 25 C TO PEAK 260 C Time (tp)* within 5 C of the specified classification temperature (Tc) 30 seconds* Time 25 C to Peak Temperature 8 minutes max. Ramp Down Rate (Tp to TL) TIME 6 C / second max. * Tolerance for peak profile temperature (Tp ) is defined as a supplier minimum and a user maximum. TEMPERATURE (C) 10 sec. max. Average Pre-Arcing Time vs. Current Curves 260 2.00 A2.00 A 1.50 A1.50 A 1.00 A 1.00 A 0.75 A 0.75 A 0.50 A 0.50 A 150 Average I2t vs. t Curves 2.50 A2.50 A 3.00 A3.00 A 3.50 A3.50 A 4.00 A4.00 A 10001000 100 100 PREHEATING 100 100 10 10 TIME 120 seconds 10 1 I2t (A2s) I2t (A2s) PRE-ARCING TIME (SECONDS) PRE-ARCING TIME (SECONDS) 10 1 4.00 A 4.00 A 3.50 A 3.50 A 3.00 A 3.00 A 2.50 A 2.50 A 2.00 A 2.00 A 1.50 A 1.50 A 1.00 A 1.00 A 0.75 A 0.75 A 0.50 A 0.50 A 1 0.1 0.1 1 0.1 0.1 0.010.01 0.01 0.01 0.001 0.001 0.0001 0.0001 0.1 0.1 0.0010.001 1 1 10 10 CURRENT (A) (A) CURRENT 100 100 0.0001 0.0001 0.0001 0.0010.001 0.01 0.01 0.0001 0.1 0.1 1 1 10 10 100 100 TIMETIME (SECONDS) (SECONDS) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SF-0603HIxxxF and Reel Packaging Potentiometer Specifications 3312 - 2Series mmTape SMD Trimming SF-0603HIxxxF Series per EIA 481-2 Tape Dimensions W 8.10 0.20 (.319 .008) P0 4.0 0.10 (.157 .004) P1 4.0 0.10 (.157 .004) P2 2.0 0.05 (.079 .002) 1.00 0.10 (.039 .004) A0 1.80 0.10 (.071 .004) B0 3.50 0.05 (.138 .002) F 1.75 0.10 (.069 .004) E1 1.55 + 0.05 (.061 + .002) D0 PACKAGING: Paper tape, 8,000 pcs. per reel 0.8 0.6 0.4 0.2 13.40 0.50 (.539 .020) 178.00 1.00 (7.008 .039) DIA. 2.20 0.30 (.087 .012) 13.20 +0.3/-0.2 (.520 +.012/-.008) DIA. 0.8 0.6 0.4 0.2 1.20 0.20 (.047 .008) E1 60.20 0.50 (2.370 .020) DIA. D0 1.40 0.20 (.055 .008) P0 P2 W F B0 P1 AO KO DIMENSIONS: DIRECTION OF UNREELING REV. B 01/19 MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and (32 ?+( 3$2".++$"3(5$+8:.41-2; Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change 6(3'.43-.3("$2$122'.4+#"'$"*%.1 -#.!3 (-3'$+ 3$231$+$5 -3(-%.1, 3(.- -#5$1(%83' 324"'(-%.1, 3(.-(2"411$-3 and complete before placing orders for Bourns(R) products. The characteristics and parameters of a Bourns(R) product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns' knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns(R)/1.#4"3(- 42$1 //+(" 3(.-, 85 18 %1.,3'$# 3 2'$$3"' 1 "3$1(23("2 -#/ 1 ,$3$12#4$3.(3'$".,!(- 3(.-.%3'$.41-2(R) product with other components (-3'$42$1<2 //+(" 3(.-.1((3'$$-5(1.-,$-3.%3'$42$1 //+(" 3(.-(32$+%'$"' 1 "3$1(23("2 -#/ 1 ,$3$12.% .41-2(R) /1.#4"3 +2." - -##.5 18(-#(>$1$-3 //+(" 3(.-2 -# "34 +/$1%.1, -"$, 85 18.5$13(,$2$122'.4+# +6 825$1(%8 the actual performance of the Bourns(R)/1.#4"3(-3'$(12/$"(="#$5("$2 -# //+(" 3(.-2 -#, *$3'$(1.6-(-#$/$-#$-3 )4#&,$-321$& 1#(-&3'$ ,.4-3.% ##(3(.- +3$23, 1&(-3.#$2(&-(-3.3'$(1#$5("$.1 //+(" 3(.-3.".,/$-2 3$%.1 #(>$1$-"$2!$36$$-+ !.1 3.18 -#1$ +6.1+#".-#(3(.-2 -+$22.41-2' 2$7/+("(3+8#$2(&- 3$# -(-#(5(#4 +.41-2(R) product as meeting the requirements of a particular industry 23 -# 1#$& .1 / 13("4+ 104 +(=" 3(.-$&+(23$#.11$".&-(9$#.41-2(2-.31$2/.-2(!+$%.1 -8 % (+41$.% -(-#(5(#4 +.41-2(R)/1.#4"33.,$$33'$1$04(1$,$-32.%24"'(-#4231823 -# 1#.1/ 13("4+ 104 +(=" 3(.-2$12 of Bourns(R) products are responsible for ensuring compliance with safety-related requirements and standards applicable to 3'$(1#$5("$2.1 //+(" 3(.-2 Bourns(R)/1.#4"32 1$-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$#%.142$(--4"+$ 1+(%$2 5(-&+(%$"1(3(" +.1+(%$2423 (-(-& //+(" 3(.-2-.1(- -8.3'$1 //+(" 3(.-26'$1$% (+41$.1, +%4-"3(.-, 81$24+3(-/$12.- +(-)418#$ 3'.12$5$1$/1./$138 .1$-5(1.-,$-3 +# , &$-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2 on a case-by-case basis, use of any Bourns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ourns(R)23 -# 1#/1.#4"32 1$-.33$23$#3.".,/+86(3'-(3$#3 3$2$#$1 +5( 3(.-#,(-(231 3(.-23 -# 1#2&$-$1 ++8 .1 -8.3'$1&$-$1 ++8$04(5 +$-3&.5$1-,$-3 +.1& -(9 3(.-23 -# 1# //+(" !+$3./1.#4"32#$2(&-$#.1, -4% "341$#%.1 42$(- (1"1 %3.12/ "$ //+(" 3(.-2.41-2$7/1$22+8(#$-3(=$2.41-2(R) standard products that are suitable for use in aircraft .12/ "$ //+(" 3(.-2.-24"'/1.#4"32<# 3 2'$$32(-3'$2$"3(.-$-3(3+$#://+(" 3(.-2;-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2.- " 2$!8" 2$! 2(242$.% -8.3'$1.41-2(R) standard /1.#4"3(- - (1"1 %3.12/ "$ //+(" 3(.-,(&'3-.3!$2 %$ -#3'42(2-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$# -#(2 3 the user's sole risk. '$42$ -#+$5$+.%3$23(-& //+(" !+$3..41-2(R) custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns(R)"423.,/1.#4"32 1$2/$"( ++8#$2(&-$#!2$-3 61(33$- &1$$,$-3!$36$$-.41-2 -#3'$42$11$& 1#(-&3'$42$ -#+$5$+.%24"'3$23(-&3'$ !.5$/1.5(2(.-2 //+(" !+$3..41-2(R) standard products shall also apply to such Bourns(R) custom products. Users shall not sell, transfer, export or re-export any Bourns(R)/1.#4"32.13$"'-.+.&8%.142$(- "3(5(3($26'("'(-5.+5$3'$ #$2(&-#$5$+./,$-3/1.#4"3(.-42$.123."*/(+(-&.%-4"+$ 1"'$,(" +.1!(.+.&(" +6$ /.-2.1,(22(+$2-.12' ++3'$842$ Bourns(R)/1.#4"32.13$"'-.+.&8(- -8% "(+(386'("'$-& &$2(- "3(5(3($21$+ 3(-&3.24"'#$5("$2'$%.1$&.(-&1$231("3(.-2 //+83. ++42$2 -# //+(" 3(.-23' 35(.+ 3$- 3(.- +.1(-3$1- 3(.- +/1.'(!(3(.-2(-"+4#(-&$,! 1&.2.1(-3$1- 3(.- + 1$&4+ 3(.-2413'$1.41-2(R) products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns(R) products may not, without /1(.1 43'.1(9 3(.-%1.,.41-2 -#.13'$.5$1-,$-3!$1$2.+#31 -2%$11$#.11$$7/.13$#3. -8/ 138-.3$+(&(!+$ 3.1$"$(5$".,,.#(3($22.%36 1$ -#3$"'-(" +# 3 .3'$, 7(,4,$73$-3/$1,(33$#!8 //+(" !+$+ 6.41-2#(2"+ (,2( -8 -# +++( !(+(38%.12/$"( +/4-(3(5$".-2$04$-3( + (-"(#$-3 +.1(-#(1$"3# , &$2.1+.231$5$-4$2.1+.23/1.=32 -#(( -8 -# ++(,/+($#6 11 -3($2(-"+4#(-&(,/+($#6 11 -3($2 .%=3-$22%.1/ 13("4+ 1/41/.2$-.-(-%1(-&$,$-3 -#,$1"' -3 !(+(38 bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf