ROCKER SWITCHES
1
DESCRIPTION
These rocker switches offer the
widest selection of features
available, providing the design
flexibility needed to fill the
requirements of a variety of
applications. They are available in
two versions: standard and sealed.
The Sealed Rockette features a
silicone rubber seal that protects
contacts and mechanisms.
Allswitches resist contaminants
such as sand, dust and moisture
with both a base-to-frame seal
and an actuator seal.
Non-illuminated and illuminated
versions are available. For Sealed
Rockette Selection Table,
seepage1.24.
SPECIFICATIONS
See selection tables.
Circuits:
See selection tables.
1.20
General Purpose Rockette Switches — AC Rated
Start with this ...to get to your
Base Circuit Number ...add each appropriate Code Number or Letter... Complete Catalog Number
Base Circuit Mounting Rocker or Paddle Rocker or Paddle Terminal Complete
Catalog Number Frame Style Color Type Catalog Number
8134K21 A 1 M 50 8134K21A1M50
HOW TO ORDER — STANDARD ROCKETTE SWITCHES
To determine your Complete Catalog Number, you must start with the
appropriate Base Circuit Number and add the appropriate Code Letters and/or Numbers as in the example below:
STANDARD ROCKETTE SWITCHES SELECTION TABLE(BOLDFACE TYPE INDICATES ITEMS NORMALLY IN DISTRIBUTOR STOCK)
Rating
See Frame
Type On
Pages 1.22-
1.23
Poles
and
Throw
Circuit with Rocker in
UP CENTER DOWN
Position Position Position
1 P.S.T.ON NONE OFF A8134K21 U
ON* NONE OFF 8135K21
1 P.S.T.ON NONE OFF A8144K21
ON* NONE OFF 8145K21
ON OFF ON 8144K20
1 P.D.T. ON NONE ON B 8144K22
ON* OFF ON* 8146K20
1 P.D.T. ON OFF ON B 8151K20
2 P.S.T. ON NONE OFF C 8132K21Y
ON OFF ON 8132K20 Y
2 P.D.T.ON NONE ON D8132K22 Y
ON* OFF ON* 8138K20
ON* OFF ON 8138K30
2 P.S.T.ON NONE OFF C8142K21
ON* NONE OFF 8147K21
ON OFF ON 8142K20
2 P.D.T.ON NONE ON D8142K22
ON* OFF ON* 8148K20
ON* OFF ON 8148K30
2 P.S.T. ON NONE OFF C 8150K21
2 P.S.T. ON NONE OFF C 8155K21
2 P.D.T.ON OFF ON D8155K20
ON NONE ON 8155K22
4 P.D.T. ON OFF ON F 8130K20 Y
4 P.S.T. ON NONE OFF E 8140K21
4 P.D.T.ON OFF ON F8140K20
ON NONE ON 8140K22
CODE LETTERS AND NUMBERS — ADD TO BASE CIRCUIT NUMBER
Mounting Frame Rocker or Paddle Rocker or Paddle Terminal
Type Style Color Type
Frame Code Style Code Color Code Type Code
Type
*Momentary contact.
QAdd code letters and numbers for mounting frame, rocker style and color and terminal construction.
WThese switches also have marked rating of 7A, at 277V ac and 3/4 Hp at 277V ac.
EAlso rated 3/4 Hp at 125V ac.
RRecommended for use with snap-in mounting.
TCan not be used with snap-in mounting bezel.
YAlso rated 2A, 277V ac; 2.5A, L125V ac.
UAlso rated 2.5A, 125V ac; 1/4 Hp, 125V ac.
CIRCUIT
NUMBER
SEE
PAGE4.28
BASE
CIRCUIT
NUMBER Q
15A, 125V ac
10A, 250V ac
3/4 Hp, 250V ac
6A, 125V ac
3A, 250V ac
1000W, 125V ac
10A, 250V ac
6A, 125V ac
3A, 250V ac
15A, 125V ac
10A, 250V ac
3/4 Hp, 250V ac
1000W, 125V ac
10A, 250V ac
20A, 250V ac
6A, 125V ac
3A, 250V ac
15A, 125V ac
10A, 250V ac
W
3/4 Hp, 250V ac
50
51
52
50
51
52
50
51
52
See Frame
Type On
Pages 1.22-
1.23
See Frame
Type On
Pages 1.22-
1.23
A
B
C
X
E
F
G
W
X
Y
Z
H
See
Style On
Page 1.23
See
Style On
Page 1.23
See
Style On
Page 1.23
1
2 T
5 T
19 T
26 T
6
7
20 T
37 R
14
White
Red
Black
White
Red
Black
White
Red
Black
M
T
V
M
T
V
M
T
V
Screw
Solder
Lug
.250″
Spade
Screw
Solder
Lug
.250″
Spade
Screw
Solder
Lug
.250″
Spade
59-01 Rocker Section 1 part 1 1/26/99 3:42 PM Page 1.20
8144K21H1V52
Standard Rockette
1
Contact Mechanism:
Slow-make/Slow-break
contact mechanism.
Butt action contact mechanism
designed specifically for use
on ac and low voltage dc
applications
Contact Material:
3-6A Rated:
Movable — Silver
plated copper.
Stationary — Silver
plated copper.
10-15A Rated:
Movable — Silver -plated
copper with fine or coin silver
contact face button.
Stationary — Copper with
fine or coin silver contact
face button.
20A Rated:
Movable — Silver plated
copper with cad-oxide contact
face button.
Stationary — Copper with
cad-oxide contact face button.
1000W Rated:
Movable — Checon SK015B
contact material welded
to contactor.
Stationary — Copper with
cad-oxide contact face button.
Terminal Types:
Screw Terminals —
Brass designed to accept
#6-32 x 3/16 binding head
screws (Cat. No. 811-2)
Furnished unassembled.
Solder Lug:
6.35mm (.250″) spade.
Termination Material:
Screw and Spade — Brass.
Solder — Tintillate
plated brass.
Lamps (Sealed Only):
Voltages:
110V ac neon, 14V dc
and 28V dc.
On illuminated version, the
lamp is wired to operate in
conjunction with the switch on
single throw circuit; on double
throw circuits, the lamp is
independent of the switch.
Mounting:
Flush (two screws), sub-panel
and snap-in mounting.
Snap-In Mounting
• Convenient front panel or
sub-panel snap-in mounting.
• A vailable in one and two
pole non-illuminated or in
one pole illuminated
Rockette switches. Contact
your Eaton Sales
Representative for three
and four pole circuits.
• Unless otherwise noted,
all switches with Snap-in
Mounting are UL Recognized
and CSA Certified.
Dielectric Withstand:
1000V RMS minimum.
Options:
Standard and sealed
•Additional colors of rockers
and bezels are available.
•Hot stamped or pad printed
legends on rocker and bezel.
•P addle actuators.
•Single rocker operator on two
and three pole circuits.
•Dry circuits capabilities.
•Special ratings.
•Reversing jumpers.
•Dead back cover (two pole
base) with wire leads.
•Special circuits.
•P rinted circuit terminals and
other terminals types.
•Metal Snap-in bezels.
•Foam dust seal.
Sealed only
•Special voltage bulbs.
•Industry standard
connector available.
•Two pole illuminated circuit.
Agency Approvals:
UL Recognized.
CSA Certified.
1.21
8132K21F7N52
Standard Rockette
8132K21Z37V52
Standard Rockette with Snap-In Mounting
8057K23Z18V2
Sealed Rockette
59-01 Rocker Section 1 part 1 1/26/99 3:43 PM Page 1.21
ROCKER SWITCHES
1
General Purpose Rockette Switches — AC Rated (continued)
REFERENCE DIMENSION “AA” — TOP OF FRAME TO BOTTOM OF TERMINAL
(FROM BOTTOM OF FRAME TO BOTTOM OF TERMINAL ON SNAP-IN-FRAME TYPES)
Terminal Type A B C X
Screw 35.74 (1.407) 24.23 (.954) 24.23 (.954) 36.83 (1.450)
Solder Lug 34.54 (1.360) 23.04 (.907) 23.04 (.907) 33.78 (1.330)
.250″Spade 38.89 (1.531) 27.38 (1.078) 27.38 (1.078) 38.35 (1.510)
Dimension “AA” — mm (inches)
Frame Style
QThe “AA” dimension on frame style Y is measured from the bottom of the frame rivet head to the bottom of the center terminal.
ONEPOLE
EFGW
Screw 35.31 (1.390) 26.62 (1.048) 26.62 (1.048) 34.82 (1.371)
Solder Lug 34.54 (1.360) 25.86 (1.018) 25.86 (1.018) 34.06 (1.341)
.250″Spade 38.86 (1.530) 30.18 (1.188) 30.18 (1.188) 38.38 (1.511)
TWOPOLE
XY Q ZH
Screw 35.31 (1.390) 24.23 (.954) 34.82 (1.371) 35.74 (1.407)
Solder Lug 34.54 (1.360) 23.47 (.924) 34.06 (1.341) 34.54 (1.360)
.250″Spade 38.86 (1.530) 27.79 (1.094) 38.38 (1.511) 38.89 (1.531)
TWO POLE FOURPOLE
REFERENCE DIMENSION “BB” — BOTTOM
OFBASE TOBOTTOM OF TERMINAL
Dimension “BB”
mm (inches)
TERMINAL TYPE
52.32
(2.06)
Contoured Snap-In Bezel,
Two Pole Bases Only
28.44
(1.12)
39.37 ± .254
(1.550)
22.86 ± .254
(.900)
Snap-In Bezel One,
Two and Four Pole Bases
49.27
(1.94)
Sub-Panel Snap-In Mounting Bezel,
One and Two Pole Bases
43.18
(1.700)
24.38
(.960)
Snap-In Mounting Bezel,
Two Pole Base Only
36.83
(1.450) 30.23
(1.190)
125°
Approx.
Panel Thickness:
1.02 to 3.56mm
(.040 to .140")
21.80
(.830)
17.27
(.680)
TYPE W TYPE X TYPE Y TYPE Z PANEL OPENING
SNAP-IN MOUNTING DIMENSIONSAPPROXIMATE IN MM (INCHES)
Screw 7.62 (.300)
Solder Lug 6.86 (.270)
.250″Spade 11.18 (.440)
0.81
(.032)
34.29
(1.35)
6.35
(.250)
AA
17.5˚ 9.53
(.375)
R 13.97
(R .550)
2.03
(.080)
10.41
(.410) 49.28
(1.940)
2 Mtg.
Holes
#6-32 Tap
41.28
(1.625)
15.24
(.600)
14.27
(.562)
Quick Connect Terminal
BB
0.79
(.031)
39.37
(1.550)
17.5˚
BB
1.78
(.070)AA
0.79
(.031)
0.81
(.032)
33.83
(1.332)
6.35
(.250)
Quick
Connect
Terminals
For panel cutout see page 00.
22.86
(.900)16.51
(.650)
19.05
(.750)
9.53
(.375)
3.18
(.125)
Dia. Hole
4.78
(.188)
Solder Lug Term. Hot Tin Dipped
Screw Terminal
1.02
(.040)
#6-32 x 4.78 (.188)
Lg. Binding Head
Term. Screw
7.32 (.288) 1.02
(.040)
ONE POLE SWITCH —MOUNTING FRAME TWO POLE SWITCH —MOUNTING FRAME TERMINALS
TYPE A —LOWPROFILEROCKER STYLE 2 TYPE X —LOWPROFILEROCKER STYLE 2
BASE SWITCH DIMENSIONSAPPROXIMATE IN MM (INCHES). FOR “AA” AND “BB” DIMENSIONS SEE REFERENCE TABLES BELOW.
*ADDITIONAL MOUNTING FRAME TYPES AND ROCKER STYLES ARE SHOWN ON PAGE 1.23
1.22
59-01 Rocker Section 1 part 1 1/26/99 3:43 PM Page 1.22
1
REFERENCE DIMENSION “CC” — TOP OF FRAME TO ROCKER OR PADDLE FACE APPROXIMATE IN MM (INCHES)
Mounting Frame Type
N/A = Not Applicable.
ONE POLE TWO POLE FOUR POLE
Rocker ABC
Recommended Rocker EFG
Recommended Rocker HRecommended
Style Panel Opening Style Panel Opening Style Panel Opening
1 2.03 (.080) 13.46 (.530) 13.46 (.530) 17.53 x 31.75 6 2.03 (.080) 10.67 (.420) 10.67 (.420) 17.53 x 31.75 14 2.03 (.080) 34.04 x 31.75
(.690 x 1.250) (.690 x 1.250) (1.340 x 1.250)
2 2.03 (.080) 13.46 (.530) 13.46 (.530) 15.24 x 28.96 7 2.03 (.080) 10.67 (.420) 10.67 (.420) 17.53 x 31.75
(.600 x 1.140) (.690 x 1.250)
5 4.32 (.170) 15.75 (.620) 15.75 (.620) 17.53 x 31.75 20 N/A 10.67 (.420) 10.67 (.420) N/A
(.690 x 1.250)
19 N/A 12.70 (.500) 12.70 (.500) N/A 37 N/A N/A N/A N/A
26 N/A 12.70 (.500) 12.70 (.500) N/A
R 15.49
(R .610)
CC
16.51
(.650) 14.22
(.560) R 13.97
(R .550)
CC
16.51
(.650) R 15.49
(R .610)
CC
17.5°
CC
22.35
(.880)
16.76
(.660)
2.54(.100)
21.08
(.830) R 21.4
(R 1)
17.5°
21.08
(.830)
CC
17.53
(.690)
12.45
(.490)
2.54
(.100)
R 25.4
(R 1)
DIMENSIONS APPROXIMATE IN MM (INCHES)
FRAME TYPES AND ROCKER/PADDLE STYLES FOR STANDARD SWITCHES — NON-ILLUMINATED
ONE POLE ROCKER STYLES
STYLE 1 STYLE 2 STYLE 5 STYLE 19 STYLE 26
49.28 (1.940)
10.41
(.410) CC
41.15 (1.620)
#6-32 Tap
63.50 (2.500)
10.41
(.410) CC
57.15 (2.250)
3.81 (.150) Dia. 2 Holes
46.74 (1.840)
10.41
(.410) CC
41.15 (1.620)
3.81 (.150) Dia. 2 Holes
ONE POLE MOUNTING FRAME TYPES
TYPE A TYPE B TYPE C
49.28 (1.940)
9.65
(.380) CC
41.15 (1.620)
#6-32 Tap 2 Holes
63.50 (2.500)
9.65
(.380) CC
57.15 (2.250)
3.81 (.150) Dia. 2 Holes
53.85 (2.120)
9.65
(.380)
CC
44.45 (1.750)
3.81 (.150) Dia. 2 Holes
16.51
(.650)
CC
R 15.49 (R .610)
16.51
(.650)
CC
R 15.49 (R .610) 22.35
(.880)
16.76
(.660) 17.5°
2.547
(.100)
21.08
(.830)
R 25.4
(R .100)
CC
17.5°5.08 (.200)
2.54
(.100) 9.65 ± .76
(.380 ± .030)
21.59 ± .76
(.850 ± .030)
16.26 ± .76
(.640 ± .254)
Mounting type
recommended with this style
TWO POLE ROCKER STYLES
STYLE 6 STYLE 7 STYLE 20
TWO POLE MOUNTING FRAME TYPES
TYPE E TYPE F TYPE G STYLE 37 WITH TYPE X
49.28 (1.940)
14.73
(.580) CC
41.15 (1.620)
#6-32
Tap 2 Holes
R 15.49
(R .610)
33.02
(1.300) CC
FOUR POLE MOUNTING FRAME TYPE FOUR POLE ROCKER STYLE
TYPE H STYLE 14
1.23
59-01 Rocker Section 1 part 1 1/26/99 3:43 PM Page 1.23
ROCKER SWITCHES
1
1.24
General Purpose Rockette Switches — AC Rated (continued)
Sealed Rockette
Start with this ...to get to your
Base Circuit Number ...add each appropriate Code Number or Letter... Complete Catalog Number
Base Circuit Mounting Bulb Rocker Rocker Lens Complete
Catalog Number Frame Voltage Style Color Color Catalog Number
8055K20 X 3 5 M 1 8055K20X35M1
HOW TO ORDER — SEALED ROCKETTE SWITCHES
To determine your Complete Catalog Number, you must start with the appropriate Base Circuit Number and add the
appropriate Code Letters and/or Numbers as in the example below:
SEALED ROCKETTE SWITCHES SELECTION TABLE(BOLDFACE TYPE INDICATES ITEMS NORMALLY IN DISTRIBUTOR STOCK)
Rating Poles
and
Throw
Circuit with Rocker in
UP CENTER DOWN
Position Position Position
BASE CIRCUIT
Termination Type
.250″Solder Screw
Spade Lugs Terminal
Terminal
1 P.S.T. ON NONE OFF A 8055K238055K24 8055K25
ON OFF ON 8055K208055K21 8055K22
1 P.D.T.ON NONE ON B8055K268055K27 8055K28
ON* OFF ON 8055K298055K30 8055K31
ON* OFF ON* 8055K328055K33 8055K34
2 P.S.T. ON NONE OFF C 8055K438055K44 8055K45
ON OFF ON 8055K408055K41 8055K42
2 P.D.T.ON NONE ON D8055K468055K47 8055K48
ON* OFF ON 8055K498055K50 8055K51
ON* OFF ON* 8055K528055K53 8055K54
1 P.S.T. ON NONE OFF G 8057K238057K24 8057K25
1 P.D.T ON* OFF ON H 8057K298057K30 8057K31
CODE LETTERS AND NUMBERS — ADD TO BASE CIRCUIT NUMBER
Mounting Bulb Rocker Rocker Lens
Frame Voltage Style Q Color Color
FrameCode Voltage Code Type Code Color Code Color Code
Type
NON-ILLUMINATED NON-ILLUMINATED
ILLUMINATED ILLUMINATED
*Momentary contact.
QSee page 1.26.
See
Frame
Type
On Pages
1.25-
1.26
See
Frame
Type
On Pages
1.25-
1.26
E
F
L
X
W
Z
E
F
L
X
W
Z
Neon
110V
14V
dc
Filament
28V
dc
Filament
1
3
4
3
5
8
N/A N/A
Two
Face
Serrated
Three
Face
Smooth
Concave
Serrated
w/1
Lens
Smooth
w/1
Lens
Concave
w/1
Lens
1
2
7
White
Black
White
Black
M
V
M
V
1
2
4
5
N/A
Clear
Red
Amber
Blue
N/A
CIRCUIT
NUMBER
SEE
PAGE4.28
15A, 125V ac
10A, 250V ac
3/4 Hp, 250V ac
15A, 125V ac
10A, 250V ac
3/4 Hp, 250V ac
15A, 125V ac
10A, 250V ac
59-01 Rocker Section 1 part 1 1/26/99 3:43 PM Page 1.24
1
1.25
2.39
(.094)
Max.
20.62
(.812)
1.57
(.062)
0.81 (.032)
33.83 (1.330)
6.35
(.250)
17.5˚ R 15.49 (R .610)
16.46
(.648)
19.05
(.750)
6-32 Tap
41.15 (1.620)
49.28 (1.940)
0.79 (.031) Ref.
9.65 (.380)
9.65 (.380)
Quick
Connect
Term.
2.03
(.080)
BB
AA
BASE SWITCH DIMENSIONSAPPROXIMATE IN MM (INCHES)*ADDITIONAL MOUNTING FRAME TYPES AND ROCKER STYLES ARE SHOWN ON PAGE 1.26.
SEALED TWO POLE — MOUNTING FRAME TYPE E — ROCKER STYLE 1 TERMINALS
2.39
(.094)
Max.
20.62
(.812)
1.57
(.062)
0.81 (.032) Ref. 33.83 (1.33)
6.35
(.250)
17.5˚
R 15.49
(R .610) 16.46
(.648)
19.05
(.750)
2 Mtg. Holes
4.37 (.172) Dia.
57.15 (2.250)
63.50 (2.500)
35˚
11.51
(.453)
7.47
(.294)
0.79/0.84
(.031)/(.033)
0.81
(.032)
BB
AA
R 28.83
(R 1.135)
18.34
(.722)
SEALED TWO POLE SWITCH — MOUNTING FRAME TYPE F — ROCKER STYLE 7 PANEL OPENING
REFERENCE DIMENSIONS “AA” AND “BB”APPROXIMATE IN MM (INCHES);FROM BOTTOM OF FRAME TO BOTTOM OF TERMINAL ON SNAP-IN-FRAME TYPES
DIMENSION “AA” — TOP OF FRAME TO BOTTOM OF TERMINAL; DIMENSION “BB” — FROM BOTTOM OF BASE TO BOTTOM OF TERMINAL
DIMENSION “AA” (TWOPOLE) DIMENSION “BB”
Terminal Type E Frame F Frame L Frame W Frame X Frame Z Frame Terminal Type All Frames
Screw 35.33 (1.391) 26.62 (1.048) 35.33 (1.391) 34.82 (1.371) 35.31 (1.391) 34.82 (1.371) Screw 7.62 (.300)
Solder Lug 34.57 (1.361) 25.86 (1.018) 34.57 (1.361) 34.06 (1.341) 34.54 (1.361) 34.06 (1.341) Solder Lug 6.86 (.270)
.250″Spade 38.89 (1.531) 30.18 (1.188) 38.89 (1.531) 38.38 (1.511) 38.89 (1.531) 38.38 (1.511) .250″Spade 11.18 (.440)
3.18 (.125)
Dia. Hole
4.78
(.188) 1.02
(.040)
#6-32 x 4.78 (.188) Lg.
Binding Head
Term. Screws
Solder Lug Term. Hot Tin Dipped
Screw Terminal
7.32 (.288) 1.02
(.040)
Panel Thickness:
1.02 -3.56
(.040 -.140)
36.83
(1.450) 30.23
(1.190)
125°
Approx.
21.80
(.830)
17.27
(.680)
SNAP-IN MOUNTING FRAME DIMENSIONSAPPROXIMATE IN MM (INCHES)*ADDITIONAL ROCKER STYLES ARE SHOWN ON PAGE 1.26.
SEALED TWO POLE SWITCH — MOUNTING FRAME TYPE W — ROCKER STYLE 7
7.11
(.280)
9.91
(.390)
24.38
(.960)
41.15 (1.62)
6.35
(.250)
16.46
(.648)
19.05
(.750)
51.31 (2.020)
27.69
(1.09)
35˚
3.20
(.126)
0.79 (.031) Ref.
0.79 (.031)
BB
AA 26.97 (1.062)
6.60 (.260)
3.18 (.125)
Dia. Hole
4.78
(.188) 1.02
(.040)
#6-32 x 4.78 (.188) LG.
Binding Head
Term. Screws
Solder Lug Term. Hot Tin Dipped
Screw Terminal
7.32 (.288) 1.02
(.040)
43.18
(1.700)
24.38
(.960)
Snap-In Mounting Bezel
39.37 ± .254
(1.550)
Snap-In Bezel
22.86 ± .254
(.900)
TYPE X TYPE Z
59-01 Rocker Section 1 part 1 1/26/99 3:43 PM Page 1.25
ROCKER SWITCHES
1
General Purpose Rockette Switches — AC Rated (continued)
DIMENSIONS APPROXIMATE IN MM (INCHES)
FRAME TYPES AND ROCKER STYLES FOR SEALED SWITCHES — NON-ILL UMINATED
9.65
(.380)
CC
41.15 (1.620)
#6-32 Tap
2 Holes
49.28 (1.94)
9.65
(.380)
3.81 (.150) Dia. 2 Holes
CC
63.50 (2.50)
57.15 (2.25)
4.11 (.162) Dia. 2 Hole
49.28 (1.94)
9.65 (.380)
41.15 (1.62) CC
ONE AND TWO POLE MOUNTING FRAME TYPES
TYPE E TYPE F TYPE L
16.51
(.650) CC
R 15.49 (R .610)
16.51
(.650) CC
R 15.49 (R .610)
16.51
(.650)
R 28.83 (R 1.135)
R 15.49
(R .610) CC
ONE AND TWO POLE ROCKER STYLES
STYLE 1 STYLE 2 STYLE 7
REFERENCE DIMENSION “CC” APPROXIMATE IN MM (INCHES)
TOP OF FRAME TO ROCKER FACE
Mounting Frame Type
ONE AND TWO POLE (NON-ILLUMINATED) ONE POLE (ILLUMINATED)
Rocker Style E F L Recommended Panel Opening Rocker Style E F L Recommended Panel Opening
1 2.03 (.080) 10.67 (.420) 2.03 (.080) 17.53 x 31.75 (.690 x 1.250) 3 2.03 (.080) 10.67 (.420) 2.03 (.080) 17.53 x 31.75 (.690 x 1.250)
2 2.03 (.080) 10.67 (.420) 2.03 (.080) 17.53 x 31.75 (.690 x 1.250) 5 2.03 (.080) 10.67 (.420) 2.03 (.080) 17.53 x 31.75 (.690 x 1.250)
7 2.79 (.110) 11.43 (.450) 2.79 (.110) 17.53 x 31.75 (.690 x 1.250) 8 2.79 (.110) 11.43 (.450) 2.79 (.110) 17.53 x 31.75 (.690 x 1.250)
1.26
DIMENSIONS APPROXIMATE IN MM (INCHES)
FRAME TYPES AND ROCKER STYLES FOR SEALED SWITCHES — ILL UMINATED
ONE POLE MOUNTING FRAME TYPES
TYPE E TYPE F TYPE L
9.65
(.380)
CC
41.15 (1.620)
#6-32 Tap
2 Holes
49.28 (1.94)
9.65
(.380)
3.81 (.150) Dia. 2 Holes
CC
63.50 (2.50)
57.15 (2.25)
4.11 (.162) Dia. 2 Hole
49.28 (1.94)
9.65 (.380)
41.15 (1.62) CC
16.51
(.650)
9.14
(.360)
5.49
(.216)
CC
R 15.49
(R .610)
16.51
(.650)
9.14
(.360)
5.49 (.216)
R 15.49 (R .610)
CC
16.51
(.650)
12.60
(.496)
8.89 (.350)
CC
R 28.83 (R 1.135)
R 15.49
(R .610)
ONE POLE ROCKER STYLES
STYLE 3 STYLE 5 STYLE 8
59-01 Rocker Section 1 part 1 1/26/99 3:43 PM Page 1.26
