SKEG 6mm Square (Snap-in Type) TACT SwitchTM Switch with soft operating feel available also as joint stem and sidepush types Typical Specifications Items Specifications Ratingmax. 5mA 12V DC Ratingmin. 10A 1V DC Sharp Feeling Initial contact resistance 1k max. Travelmm 1 Soft Feeling Product Line Top push type Snap-in Type Surface Mount Type Product No. Operating force Operating life 1mA 5V DC SKEGACA010 0.78N Ivory SKEGAEA010 1.96N Dark gray SKEGADA010 0.78N SKEGAFA010 1.96N Operating direction Top push 100,000 cycles Stem color Stem Minimum order unitpcs. Drawing No. Japan Export Joint stem 1 1,000 Ivory 1,000 Flat stem Dark gray 2 Side push type Radial Type Product No. Operating force SKEGLAA010 0.78N SKEGLBA010 1.96N Operating direction Operating life 1mA 5V DC Side push 50,000 cycles Stem color Black Dark gray Minimum order unitpcs. Drawing No. Japan Export 1,000 1,000 3 Packing Specifications Bulk Number of packagespcs. 1 case / Japan 1 case / export packing Export package measurements mm 10,000 30,000 309x476x347 Dimensions No. Unit:mm Photo PC board mounting hole dimensions Viewed from switch mounting face Style Joint stem type 4 4.4 1 H5 H6 1 2.1 0.7 Stem 1 2-o1.25 hole 3.5 5.5 7 9 5.5 1 5.5 2 1 Refer to P.265 for soldering conditions. 256 SKEG6mm Square (Snap-in Type) No. Unit:mm Photo PC board mounting hole dimensions Viewed from switch mounting face Style Flat stem type TM Switch TACT Dimensions H6 Sharp Feeling 3 Stem H5 0.8 2 2-o1.25 hole 7 3.5 5.5 Soft Feeling 5.5 5.5 2 Snap-in Type 1 1 Side push type Surface Mount Type 2-o1.3 hole Stem 2.57 4.5 2-o1 hole 7 1 Radial Type 3 2 Note Circuit Diagram Please use 1.6mm thick PC boards.For horizontal type, 1.0mm 2 1 Product Line of Knobs Applicable model Unit:mm Variety Dimensions Color Label dimensions Model SK2AA00540 Keytop H6 Keytop+Cap 4RO .5 4 Key top Applicable to joint stem type Clear Cap 3 SKEG H7.4 H6 Cap Red Blue Ivory Black Yellow SK2AA00310 SK2AA00320 SK2AA00330 SK2AA00340 SK2AA00350 SK2AA00360 SK2AA00370 SK2AA00380 SK2AA00390 SK2AA00400 Thickness 0.1 Notes 1. The knob will be delivered together with the switch but packed separately. 2. The label is not included. 257 TACT SwitchTM List of Varieties TACT SwitchTM Soft Feeling Type Type Snap-in Series SKEG Surface Mount SKEG SKPF SKPS SKPM Radial SKPG SKPR SKPL SKPD NEW Photo High operation force Low contact Low contact Long travel resistance resistance High operation force Round terminal Low contact resistance Low contact resistance Sharp Feeling Soft Feeling Snap-in Type Features -- -- Water-proof -- -- -- -- -- -- -- -- -- Dust-proof -- -- -- -- -- -- -- -- -- IP standard -- -- -- -- -- -- -- -- -- Top push -- Side push -- -- -- -- -- -- -- -- V6.45 7.8 5 See the relevant pages for respective product descriptions Operating direction W Dimensions mm D H 6 See the relevant pages for respective product descriptions Surface Mount Type Contact -- 7.5 8 5.9 6.6 7.5 9.9 9 6 6.3 7.8 7.3 10 5 Carbon 6.5 Silver Carbon Silver -- Carbon 1N max. Operation force coverage 1N to 2N 2N to 3N 3N to 4N Radial Type 4N to 5N Travelmm Ground terminal Operating temperature range Automotive use 1 -- -- See the relevant pages for respective product descriptions 1.05 -- -- 1.3 -- -20 to 70 -- 1 1.3 See the relevant pages for respective product descriptions -- -- -- -40 to 90 Life Cycle Ratingmax. Resistive load 50mA 16V DC 5mA 12V DC Ratingmin. Electrical Resistive load performance Insulation resistance 50mA 16V DC 5mA 12V DC 10A 1V DC 100M min. 100V DC 1min. 50M min. 100V DC 1min. SKPDAF: 100M min. 100V DC 1min. 250V AC 1min. 100V AC 1min. SKPDAF: 250V DC 1min. Voltage proof Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively Lifetime Shall be in accordance with individual specifications. Durability Environmental performance 5mA 12V DC Cold -30 96h -40 96h -40 1,000h -40 96h -40 1,000h -40 96h Dry heat 80 96h 90 96h 90 1,000h 90 96h 90 1,000h 90 96h 60, 90 to 95%RH 1,000h 60, 90 to 95%RH 96h 60, 90 to 95%RH 1,000h 60, 90 to 95%RH 96h Damp heat Page 60, 90 to 95%RH 96h 256 258 259 260 261 262 263 264 WWidth. The most outer dimension excluding terminal portion. D Depth. The most outer dimension excluding terminal portion. H Height. The minimum dimension if there are variances. TACT SwitchTM Soldering Conditions 265 TACT SwitchTM Cautions 266 Notes 1. The automotive operating temperature range to be individually discussed upon request. 2. Indicates applicability to all products in the series. 194 TACT SwitchTM Soldering Conditions TM Switch TACT Condition for Reflow Available for Surface Mount Type. 1. Temperature measurement: Thermocouple 0.1 to 0.2 CAKor CCTat solder joints copper foil surface. A heat resistive tape should be used to fix thermocouple. 2. Temperature profile Temperature (C ) 260C max. 3 sec max. Sharp Feeling 230C 180 150 Time Soft Feeling 120 sec max. pre-heating 40s max. 3 to 4min. Time inside soldering equipment Manual Soldering Available for Snap-in Type and Radial Type. Condition Flux built-up Mounting surface should not be exposed to flux Preheating temperature Ambient temperature of the soldered surface of PC board. 100 max. Items Condition Soldering temperature 350 max. Duration of soldering 3s max. Capacity of soldering iron 60W max. Preheating time 60s max. Soldering temperature 260 max. Duration of immersion 5s max. Items Condition Number of soldering 2times max. Soldering temperature 360 max. Duration of soldering 3s max. Capacity of soldering iron 60W max. SKHH, SKPD Series Radial Type Items Surface Mount Type Conditions for Auto-dip Snap-in Type Notes 1. The above temperature shall be measured of the top of switch. There are cases where the PC board's temperature greatly differs from that of the switch, depending on the material, size, thickness of PC boards and others. The above-stated conditions shall also apply to switch surface temperatures. 2. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. SKHH, SKHW, SKRG, SKPD Series Items Condition Flux built-up Mounting surface should not be exposed to flux Preheating temperature Ambient temperature of the soldered surface of PC board. 110 max. Items Condition Preheating time 60s max. Soldering temperature 350 max. Soldering temperature 260 max. Duration of soldering 3s max. Duration of immersion 5s max. Capacity of soldering iron 20W max. Number of soldering 2times max. SKTD, SKTG, SKQJ, SKQK, SKEG Series SKQJ, SKQK, SKEG Series Items Condition Flux built-up Mounting surface should not be exposed to flux Preheating temperature Ambient temperature of the soldered surface of PC board. 100 max. Preheating time 45s max. Soldering temperature 255 max. Duration of immersion 5s max. Number of soldering 2times max. Notes 1. Prevent flux penetration from the top side of the TACT SwitchTM. 2. Switch terminals and a PC board should not be coated with flux prior to soldering. 3. The second soldering should be done after the switch is stable with normal temperature. 4. Use the flux with a specific gravity of min 0.81. EC-19S-8 by TAMURA Corporation, or equivalents. 265