Ordering number : EN7691C TND027MP Excellent Power Device http://onsemi.com Lowside Power Switch Lamp-, Solenoid-, and Motor-Driving, Single MP Features * * * * N-channel MOSFET built in Overheat protection. (Self recovery type) Overcurrent protection. (Self recovery type current limiting function) Overvoltage protection Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Drain-to-Source Voltage Conditions Ratings VDS IO(DC) Output Current Input Voltage VIN PD Allowable Power Dissipation Operating Supply Voltage Operating Temperature VDS(opr) Topr Junction Temperature Tj Storage Temperature Tstg Unit 60 V 1.5 A -0.3 to +10 V 1.0 W 40 V -40 to +85 C 150 C -55 to +150 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7520-003 * Package : MP * JEITA, JEDEC : SC-51, TO-92(1-WATT), TO-226AE * Minimum Packing Quantity : 1,000 pcs./box 8.5 Marking 3.0 0.5 0.6 0.5 LOT No. TND027MP-AZ TND027 4.7 6.0 5.0 14.0 1.0 0.5 1 : GND 2 : OUT 3 : IN 1 2 3 1.45 1.45 Block Diagram OUT(D) Overcurrent protective circuit MP Output current control IN ESD protective circuit Overvoltage protective circuit Gate shutdown circuit Overheat protective circuit GND(S) Semiconductor Components Industries, LLC, 2013 August, 2013 O1712 TKIM/22008 TIIM/D2607IP TIIM TC-00001113/80206/O2203 TSIM TA-100479 No.7691-1/9 TND027MP Electrical Characteristics at Ta=25C Parameter Symbol Drain-to-Source Clamp Voltage VDS, clamp IDSS(1) Ratings Conditions min typ VIN=0V, IO=1mA VIN=0V, VDS=50V VIN=0V, VDS=12V 60 VIN(th) VIN(opr) VDS=5V, IO=1mA 1.0 VIN=5V, IO=1A Input Current (Output On) RDS(on) IIN Over-Heat Detecting Temperature Tj(sd) Over-Current Detecting Current Is VIN=5V, IO=1A VIN=5V Over-Current Limit (Peak) ILMT VIN, clamp Output-OFF Current IDSS(2) Input Threshold Voltage Protection Circuit Operating Input Voltage Drain-to-Source ON Resistance Input Clamp Voltage Unit max V 1.5 10 5 2.0 4 V 10 V 0.3 0.4 0.6 mA 120 150 190 C 3.0 6.0 9.0 A VIN=5V 3.0 6.0 9.0 A IIN=1mA 10 VIN=5V V Notes : 1. Overcurrent protection circuit limits the output current to the range of overcurrent limit value. 2. During overheat protecting operation, output current is turned off. Ordering Information Device TND027MP-AZ Shipping memo MP 1,000pcs./box Pb Free RDS(on) -- Ta 0.5 IO=1A 0.8 Drain-to-Source ON Resistance, RDS(on) -- 5V 4V 0.3 6V 0.2 0.1 0 --50 RDS(on) -- VIN 1.0 IO=1A 0.4 Drain-to-Source ON Resistance, RDS(on) -- Package 0.6 0.4 Ta=85C 0.2 25C --40C 0 --25 0 25 50 Ambient Temperature, Ta -- C 75 100 IT05233 0 2 4 6 8 Input Voltage, VIN -- V 10 12 IT05234 No.7691-2/9 TND027MP IIN -- Ta 0.12 IIN -- VIN 1.4 Ta=25C VIN=5V 1.2 Input Current, IIN -- mA Input Current, IIN -- mA 0.10 0.08 0.06 0.04 0.02 1.0 0.8 ( I IN or abn ma l) 0.6 0.4 0.2 IIN(normal) 0 --50 0 --25 0 25 50 75 Ambient Temperature, Ta -- C 100 0 4 6 8 10 Input Voltage, VIN -- V IS -- Ta 9 2 IT05235 IT05236 IS -- VIN 9 Overcurrent Detecting Current, IS -- A Overcurrent Detecting Current, IS -- A Ta=25C 8 7 6V 5V 6 4V 5 4 3 --50 8 7 6 5 4 3 --25 0 25 50 75 Ambient Temperature, Ta -- C 4 100 6 7 8 9 Input Voltage, VIN -- V ILMT -- Ta 9 5 IT05237 10 IT05238 ILMT -- VIN 12 8 Overcurrent Limit, ILMT -- A 6V 5V 7 4V 6 5 4 3 --50 0 25 50 75 Drain-to-Source Clamp Voltage, VDS, Clamp -- V Ambient Temperature, Ta -- C 8 6 4 2 100 4 VIN=0V IO=1mA 68 66 64 62 60 58 --25 0 25 50 Ambient Temperature, Ta -- C 5 75 100 IT05241 6 7 8 9 Input Voltage, VIN -- V IT05239 VDS, clamp -- Ta 70 56 --50 10 0 --25 10 IT05240 VIN, clamp -- Ta 13 Input Clamp Voltage, VIN, Clamp -- V Overcurrent Limit, ILMT -- A Ta=25C IIN=1mA 12 11 10 9 8 --50 --25 0 25 50 Ambient Temperature, Ta -- C 75 100 IT05242 No.7691-3/9 TND027MP VIN(th) -- Ta 2.0 VDS=24V 1.8 1.8 1.6 1.2 25C 1.2 1.0 0.8 --40 C 1.4 1.4 5C 1.6 Ta= 8 Output Current, IO -- A Threshold Voltage, VIN(th) -- V IO -- VIN 2.0 VDS=5V IO=1mA 0.6 0.4 1.0 0.2 0.8 --50 0 --25 0 25 50 75 1 Tj(sd) -- VIN 160 2 3 Input Voltage, VIN -- V IT05243 IT05244 PD -- Ta 1.2 TND027MP Allowable Power Dissipation, PD -- W Overheat Detecting Temperature, Tj(sd) -- C Ambient Temperature, Ta -- C 100 158 156 154 152 150 148 146 144 142 140 4.0 4.5 5.0 5.5 Input Voltage, VIN -- V 1.0 0.8 0.6 0.4 0.2 0 --40 6.0 --20 0 20 40 60 Ambient Temperature, Ta -- C IT05245 80 100 IT05246 Sample Application Circuit AC24V AC100V Lamp OUT TND027MP IN Microcontroller 5V GND Another Sample Application Circuit (Solenoid drive) AC24V AC100V Solenoid OUT TND027MP IN Microcontroller 5V GND No.7691-4/9 TND027MP Operation Description * * * * The output power MOSFET will be turned on when the input voltage exceeds the input threshold voltage (4 to 6V is recommended), and then the lamp will be turned on by the current flowing to the lamp. Conversely, the output power MOSFET will be turned off when the input voltage goes below the input threshold voltage, and the lamp will be turned off. The inrush current that occurs during normal lamp operation is limited to a preset value by the built-in overcurrent protecting circuit, which makes the lamp life longer. The internal overcurrent protection function limits the current of output power MOSFET when output current of at least the overcurrent detecting current value flows at load short. Besides, if the device temperature exceeds the allowable power dissipation, overheat protection function protects the power switch from being broken down by turning off the current of output power MOSFET when Tj comes to 150C (typical). As an example of application circuit, DC voltage can also be controlled as a solenoid drive. Addition * * * The diode between OUT and GND in the block diagram is parasitic diode of the MOSFET. Not apply a voltage on IN terminal during the period when OUT voltage is lower then GND voltage when driving a solenoid or a motor. Be sure connect a diode between OUT terminal and GND terminal when you want to apply a voltage on IN terminal under the above-stated state (that is, OUT Voltage < GND Voltage). No.7691-5/9 TND027MP Taping Specification TND027MP-AZ No.7691-6/9 TND027MP No.7691-7/9 TND027MP Outline Drawing TND027MP-AZ Mass (g) Unit 0.578 mm * For reference No.7691-8/9 TND027MP ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.7691-9/9 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ON Semiconductor: TND027MP-AZ