SMT POWER INDUCTORS Planar - PA1X9XNL Series Height: 7.4mm Max Footprint: 19.8mm x 19.6mm Max Current Rating: up to 73A Inductance Range: .405H to 6.2H Electrical Specifications @ 25C -- Operating Temperature -40C to +130C 8 Part Number 5,7 Inductance @ Irated (H 15%) Irated 1 (ADC) TYP MAX Inductance @ 0 ADC (H 15%) 73 54 39 .38 .38 .38 .48 .48 .48 1.05 1.25 1.45 30 25 21 .38 .38 .38 0.45 0.63 0.85 1.05 1.25 1.45 52 52 39 30 25 21 0.95 1.40 1.90 2.40 2.80 3.40 1.60 2.40 3.30 4.00 4.90 5.80 2-TURN (LOW - LOSS) SERIES PA1294.450NL 0.45 PA1294.650NL 0.63 PA1294.910NL 0.85 PA1294.112NL PA1294.132NL PA1294.152NL 2-TURN SERIES PA1292.450NL PA1292.650NL PA1292.910NL PA1292.112NL PA1292.132NL PA1292.152NL 3-TURN SERIES PA1393.102NL PA1393.152NL PA1393.202NL PA1393.252NL PA1393.302NL PA1393.352NL 4-TURN SERIES PA1494.162NL PA1494.242NL PA1494.362NL PA1494.442NL PA1494.532NL PA1494.622NL 25C 100C Heating Current 3 (A) 0.45 0.65 0.91 95 63 46 80 53 37 73 73 73 .48 .48 .48 1.10 1.30 1.50 35 29 24 30 26 22 73 73 73 .78 .78 .78 .78 .78 .78 .98 .98 .98 .98 .98 .98 0.45 0.65 0.91 1.10 1.30 1.50 95 63 46 35 29 24 80 53 37 30 26 22 52 52 52 52 52 52 42 36 25 20 15 12 1.15 1.15 1.15 1.15 1.15 1.15 1.43 1.43 1.43 1.43 1.43 1.43 1.0 1.5 2.0 2.5 3.0 3.5 68 43 29 23 18 15 54 35 25 21 16 13 42 42 42 42 42 42 37 30 17 14 11 9 1.44 1.44 1.44 1.44 1.44 1.44 1.80 1.80 1.80 1.80 1.80 1.80 1.60 2.42 3.60 4.40 5.34 6.20 55 35 20 16 13 11 43 27 18 15 12 10 37 37 37 37 37 37 DCR (m) NOTES: 1. The rated current as listed is either 85% of the saturation current or the heating current, depending on which value is lower. 2. The saturation current is the current which causes the inductance to drop by 15% at the stated ambient temperatures (25C and 100C). This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component. 3. The heating current is the DC current which causes the temperature of the part to increase by approximately 45C. This current is determined by mounting the component on a PCB with .25" wide, 2 oz. equivalent copper traces, and applying the current to the device for 30 minutes with no forced air cooling. 4. In high volt*time applications, additional heating in the component can occur due to core losses in the inductor which may neccessitate derating the current in order to limit the temperature rise of the Saturation Current 2 component. In order to determine the approximate total losses (or temperature rise) for a given application, the total copper and core losses should be taken into account. For approximate value of core losses, in a given application, use the core loss graph on page 24. 5. Optional Tape & Reel packaging can be ordered by adding a "T" suffix to the part number (i.e. PA1294.450NL becomes PA1294.450NLT). Pulse complies to industry standard tape and reel specification EIA481. 6. Meets solderability test per IPC/EIA J-STD-002B using flux type ORL0. 7. The "NL" suffix indicates an RoHS-compliant part number. Non-NL suffixed parts are not necessarily RoHS compliant, but are electrically and mechanically equivalent to NL versions. If a part number does not have the "NL" suffix, but an RoHS compliant version is required, please contact Pulse for availability. 8. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 54643211 / 2 * China 86 755 33966678 * Taiwan 886 3 4641811 www.pulseeng.com 66 SPM2007 (11/07) SMT POWER INDUCTORS Planar - PA1X9XNL Series Mechanical .770 19,56 MAX Part Number (.588) (14,94) Date Code Country of Origin Patent Pending Weight . . . 10.8 grams MAX Tape & Reel . . . . . . 250/reel .390 9,90 Dimensions: Inches mm Unless otherwise specified, all tolerances are .010 0,25 .125 4 X 3,18 .780 MAX 19,81 .290 7,37 MAX .005/0,13 3 SURFACES .350 8,89 1.732 .012 44,00 0,30 .800 20,32 TAPE & REEL LAYOUT .770 19,56 .945 24,00 USER DIRECTION OF FEED Suggested Pad Layouts and Schematics PA1292 & PA1294 .405 to 1.50 H 21 to 73 Adc .390 9,91 .250 6,35 PA1494 1.60 to 6.20 H 9 to 37 Adc PA1393 1.00 to 3.40 H 12 to 42 Adc (2X) O .110 2,79 .390 9,91 .250 6,35 .375 9,53 (2X) O .110 2,79 .390 9,91 .250 6,35 .500 12,70 2 1 1 4 4 5 (2X) O .110 2,79 USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 54643211 / 2 * China 86 755 33966678 * Taiwan 886 3 4641811 www.pulseeng.com 67 SPM2007 (11/07) SMT POWER INDUCTORS Planar - PA1X9XNL Series Inductance vs. Current Characteristics (25C) PA1292.XXX & PA1294.XXX Series 1.80 1.60 3.50 1.20 1.00 0.80 0.60 0.40 3.00 2.50 2.00 1.50 1.00 0.50 0.00 1 4 7 10 13 16 19 22 25 28 31 34 37 40 43 46 49 52 55 58 61 64 67 70 73 76 79 82 85 88 91 94 97 0.20 0.00 Current (Amps DC) 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 Inductance (uH) 1.40 Inductance (uH) PA1393.XXX Series 4.00 Current (Amps DC) PA1494.XXX Series 7.00 Inductance (uH) 6.00 5.00 4.00 3.00 2.00 1.00 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 0.00 Core Loss vs. Flux Density Temperature Rise vs. Power (W) Dissipation 120 2.0 1.8 100kHz 200kHz 300kHz 400kHz 500kHz 600kHz 700kHz 1.6 1.4 1.2 1.0 0.8 Temperature Rise (C) CoreLoss = 1.59E-13*(DB)2.5*(Freq_kHz)1.8 Core Loss (W) Current (Amps DC) 0.6 0.4 100 80 60 40 20 0.2 0.0 0 0 500 1000 1500 DB (Gauss) 2000 2500 DB = 179 * L(H) * DA / (Pri_Turns) 0 1 2 3 4 5 6 7 Total Power (W) Dissipation Total Power Dissipation = Copper Loss (W) + Core Loss (W) 2 Copper Loss (W) = Current (rms) * DCR (mW) / 1000 Core Loss (W) = per table USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 54643211 / 2 * China 86 755 33966678 * Taiwan 886 3 4641811 www.pulseeng.com 68 SPM2007 (11/07)