To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
© 2005 Fairchild Semiconductor Corporation DS01 1597 www.fairchildsemi.com
April 1993
Revised April 2005
74LVX245 Low Voltage Octal Bidirecti onal Transceiver
74LVX245
Low Voltage Octal Bidirectional Transceiver
General Descript ion
The LVX 245 con tains eig ht non -invertin g bid irecti onal bu ff-
ers and is intended for bus-oriented applications. The
Transmit/Receive (T/R) input determines the direction of
data flow through the bidirectional transceiver. Transmit
(active-HIGH) enables data from A ports to B ports;
Receive (active-LOW) enables data from B ports to A
ports. The Ou tput Ena ble input , when HI GH, disable s both
A and B ports by placing them i n a high imped ance con di-
tion.
Features
■Ideal for low power/low noise 3.3V applications
■Guaranteed simultaneous switching noise level and
dynamic thresh ol d per for man ce
Ordering Code
Devices also available in Tape and R eel. Sp ec if y by appending the suffix lett er “X” to the orde ring code.
Pb-Free package per JEDEC J-STD-020B.
Logic Symbols Connection Diagram
Pin Descriptions Truth Table
H
HIGH Voltage Leve l X
Immaterial
L
LOW Voltage Lev el
Order Number Package Number Package Description
74LVX245M M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
74LVX245SJ M20D Pb-Free 20-Lead Small Outline Package (SOP), EIA J TYPE II, 5.3mm Wide
74LVX245MTC MTC20 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Pin Description
Names
OE Output Enable Input
T/R Transmit/R ec eive Input
A0–A7Side A Input s or 3-STATE Outputs
B0–B7Side B Input s or 3-STATE Outputs
Inputs Outputs
OE T/R
L L Bus B Data to Bus A
L H Bus A Data to Bus B
HXHIGH-Z State
www.fairchildsemi.com 2
74LVX245
Absolute Maximum Ratings(No t e 1) Recommended Operating
Conditions (Note 2)
Note 1: The “Absolute Maxim um Ratings” are those values be yond which
the saf ety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The “R ecomm ended Ope rating Condition s” tabl e will d efine th e cond itions
for actu al device operation.
Note 2: Unu s ed inputs must be held HIGH or LOW. They m ay not float.
DC Electrical Characteristics
Noise Characteristics (Note 3)
Note 3: Input tr
tf
3 ns
Supply Voltage (VCC)
0.5V to
7.0V
DC Input Diode Current (IIK)
VI
0.5V
20 mA
DC Input Voltage T/R, OE (VI)
0.5V to 7V
DC Diode Current (IOK)
VO
0.5V
20 mA
VO
VCC
0.5V
20 mA
DC Bus I/O Volt age (VI/O)
0.5V to VCC
0.5V
DC Output Source
or Sink Current (IO)
r
25 mA
DC VCC or Ground Current
(ICC or IGND)
r
75 mA
Storage Tem per atu re (TSTG)
65
q
C to
150
q
C
Power Dissipation 180 mW
Supply Voltage (VCC) 2.0V to 3.6V
Input Voltage T/R, OE (VI)0V to 5.5V
Bus I/O Voltage (VI/O) 0V to VCC
Operating Temperature ( T A)
40
q
C to
85
q
C
Input Rise and Fall Time (
'
t/
'
V) 0 ns/V to 100 ns/V
Symbol Parameter VCC TA
25
q
CT
A
40
q
C to
85
q
CUnits Conditions
Min Typ Max Min Max
VIH HIGH Level 2.0 1.5 1.5
Input 3.0 2.0 2.0 V
Voltage 3.6 2.4 2.4
VIL LOW Level 2.0 0.5 0.5
Input 3.0 0.8 0.8 V
Voltage 3.6 0.8 0.8
VOH HIGH Level 2.0 1.9 2.0 1.9 VIN
VIH or VIL IOH
50
P
A
Output 3.0 2.9 3.0 2.9 V IOH
50
P
A
Voltage 3.0 2.58 2.48 IOH
4 mA
VOL LOW Level 2.0 0.0 0.1 0.1 VIN
VIH or VIL IOL
50
P
A
Output 3.0 0.0 0.1 0.1 V IOL
50
P
A
Voltage 3.0 0.36 0.44 IOL
4 mA
IOZ 3-STATE 3.6
r
0.25
r
2.5
P
AV
IN
VIH or VIL
Output VOUT
VCC or GND
Off-State Current
IIN Input Leakage Current 3.6
r
0.1
r
1.0
P
AV
IN
5.5V or GND
ICC Quiescent Supply Current 3.6 4.0 40.0
P
AV
IN
VCC or GND
Symbol Parameter VCC TA
25
q
CUnits Conditions
(V) Typ Limit CL (pF)
VOLP Quiet Output Maximum Dynamic VOL 3.3 0.5 0.8 V 50
VOLV Quiet Output Minimum Dynamic VOL 3.3
0.5
0.8 V 50
VIHD Minimum HIGH Level Dynamic Input Voltage 3.3 2.0 V 50
VILD Maximum LOW Level Dynamic Input Voltage 3.3 0.8 V 50
3 www.fairchildsemi.com
74LVX245
AC Electrical Characteristics
Note 4: Parameter guaranteed by design. tOSLH
|tPLHm
tPLHn|, tOSHL
|tPHLm
tPHLn|
Capacitance
Note 5: CPD is defined as t he v alue of the int ernal equiv alent capacitanc e which is cal cu l ated from the operating current cons umption w ithout load.
Symbol Parameter VCC TA
25
q
CT
A
40
q
C to
85
q
CUnits Conditions
(V) MinTypMaxMinMax
tPLH Propagation De lay T im e 2.7 6.1 10.7 1.0 13.5
ns
CL
15 pF
tPHL 8.6 14.2 1.0 17.0 CL
50 pF
3.3
r
0.3 4.7 6.8 1.0 8.0 CL
15 pF
7.2 10.1 1.0 11.5 CL
50 pF
tPZL 3-STATE Output 2.7 9.0 16.9 1.0 20.5
ns
CL
15 pF, RL
1 k
:
tPZH Enable Time 11.5 20.4 1.0 24.0 CL
50 pF, RL
1 k
:
3.3
r
0.3 7.1 1 1.0 1.0 13.0 CL
15 pF, RL
1 k
:
9.6 14.5 1.0 16.5 CL
50 pF, RL
1 k
:
tPLZ 3-STATE Output 2.7 11.5 18.0 1.0 21.0 ns CL
50 pF, RL
1 k
:
tPHZ Disable Time 3.3
r
0.3 9.6 12.8 1.0 14.5 CL
50 pF, RL
1 k
:
tOSLH Output to Output Skew 2.7 1.5 1.5 ns CL
50 pF (Note 4)
tOSHL (Note 4) 3.3 1.5 1.5
Symbol Parameter TA
25
q
CT
A
40
q
C to
85
q
CUnits
Min Typ Max Min Max
CIN Input Capacitance T/R, OE 410 10 pF
CI/O Output Capacitance An, Bn8pF
CPD Power Dissipation Capacitance (Note 5) 21 pF
www.fairchildsemi.com 4
74LVX245
Physical Dimensions inches (millimeters) unless otherwise noted
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
Package Number M20B
5 www.fairchildsemi.com
74LVX245
Physical Dim ensions inches (millimeters) unless otherwise noted (Continued)
Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M20D
www.fairchildsemi.com 6
74LVX245 Low Volt age Octal Bidirectional Transceiver
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC20
Fairchild does no t assume any responsibility for use of any circui try described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life suppor t de vices o r systems a re devices or syste ms
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be rea-
sonably expected to result in a significant injury to the
user.
2. A critical compon ent in any componen t of a life support
device or system whose failure to perform can be rea-
sonabl y ex pect ed to cause the fa ilu re of the lif e su pp ort
device or system, or to affect it s safety or effectiveness.
www.fairchildsemi.com
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
