Instruction Sheet
Storage Maintenance for Mass Termination
Assembly (MTA)- 100 and - 156 Connector 408--10313
LOC B
1of 1
E2009 Tyco Electronics Corporation, Harrisburg, PA
All International Rights Reserved
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names used are the property of their respective owners.
TOOLING ASSISTANCE CENTER 1--800--722--1111
PRODUCT INFORMATION 1--800--522--6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
31 JUL 09 Rev AStrain Relief Covers Made with Polyamide
To Avoid Hydration of Product,
Bag Must Have A Targeted Moistured Content
Between 2 and 3% of Weight
PRODUCT IS MOISTURIZED
DO NOT OPEN BAG UNTIL TIME OF USE
RESEAL BAG IMMEDIATELY AFTER EACH USE
1. INTRODUCTION
Proper storage of product must be maintained
according to the instructions given by the distributor
or supplier.
Proper hydration of product must be maintained
according to these instructions.
2. DESCRIPTION
Product is contained in a polyethylene bag. For
product to be functional, make sure that the following
applies:
the bag must have a target moisture content
between 2 and 3% of weight
the bag must be completely sealed
If a bag containing product has a moisture content of
less than 2% of weight, the bag must be re--hydrated
with deionized (DI) water (or distilled water) before
returning product to storage.
3. RE- HYDRATING INSTRUCTION
1. Using a scale, weigh the product in the bag.
2. Refer to the table on this page to determine the
amount of DI water to add to the bag.
3. Spray the DI water into the bag until the
targeted weight is achieved.
4. REVISION SUMMARY
SInitial release of instruction sheet
PRODUCT WEIGHT AMOUNT OF DI WATER TO ADD
P
R
O
D
U
C
T
W
E
I
G
H
T
Pound (lb)
(See Note) Cubic Centimeters
(cc)
Pound
(lb)
01011 .025
02023 .050
03034 .075
04045 .100
05056 .125
06068 .150
07080 .175
08091 .200
09103 .225
10 114 .250
11 125 .275
12 136 .300
13 148 .325
14 159 .350
15 170 .375
16 181 .400
17 193 .425
18 204 .450
19 215 .475
20 226 .500
21 238 .525
22 250 .550
23 261 .575
24 273 .600
25 284 .625
26 295 .650
27 306 .675
28 318 .700
29 329 .725
30 340 .750
31 351 .775
32 363 .800
Note: Round product weight to nearest whole pound.