Agilent HLMP-40xx, HLMP-08xx
T-1 3/4, 2 mm x 5 mm Rectangular
Bicolor LED Lamps
Data Sheet
Description
The T-1 3/4 HLMP-40xx and 2 mm
by 5 mm rectangular HLMP-08xx
are three leaded bicolor light
sources designed for a variety of
applications where dual state
illumination is required in the same
package. There are two LED chips,
mounted on a central common
cathode lead for maximum on-axis
viewability. Colors between the two
chips can be generated by
independently pulse width
modulating the LED chips.
Features
• Two color operation
• Three leads with one common
cathode
• Option of straight or spread leads
configuration
• Diffused, wide visibility range
Selection Guide
Min. Luminous Intensity Iv (mcd)
Package Part Number Color Green Red Yellow IF (mA)
T-1 3/4 HLMP-4000 Green/HER 4.2 2.1 10
HLMP-4000#xxx 4.2 2.1 10
HLMP-4015 Green/Yellow 20.0 20 20
Rectangular HLMP-0800 Green/HER 2.6 2.1 20
HLMP-0805 Green/Yellow 2.6 1.4 20
2
Part Numbering System
HLMP - X X X X # X X X
Mechanical Options
002: Tape & Reel, Straight Leads
010: Right Angle Housing, Even Leads
Color Options
00: High Efficiency Red (HER) / High Efficiency Green
05/15: Yellow / High Efficiency Green
Package Options
40: T-1 3/4 (5 mm)
08: Rectangular
Package Dimensions
HLMP-40xx Straight Leads HLMP-08xx Straight Leads
6.10 (0.240)
5.59 (0.220)
25.40
(1.00)MIN.
0.508 (0.020)
SQ. TYP.
RED OR YELLOW ANODE
(SHORT LEAD)
1.27 (0.050)
NOM.
0.89 (0.035)
0.64 (0.025)
9.19 (0.362)
8.43 (0.332)
5.08 (0.200)
4.57 (0.180)
1.27 (0.050)
NOM.
2.54 (0.100)
NOM.
FLAT INDICATES
ANODE
COMMON CATHODE
GREEN ANODE
2.54 (0.100)
NOM.
1.27 (0.050)
NOM.
0.508 (0.020)
SQ. TYP.
2.41 (0.095)
2.03 (0.085)
5.46 (0.215)
4.98 (0.196)
8.00 (0.315)
7.37 (0.290)
2.23 (0.088)
1.98 (0.078) 5.18 (0.204)
4.93 (0.194)
1.27 (0.050)
NOM.
25.40
(1.00)MIN.
COMMON
CATHODE COMMON
CATHODE
RED OR YELLOW ANODE
(SHORT LEAD)
COMMON CATHODE
GREEN
ANODE
SIDE VIEW
Notes:
1. All dimensions are in millimeters (inches).
2. Epoxy meniscus may extend about 1 mm (0.040") down the leads.
3
Absolute Maximum Ratings at TA = 25˚C
Parameter HER/Green Yellow/Green Units
Peak Forward Current 90 60 mA
Average Forward Current[1,2] (Total) 25 20 mA
DC Current[2] (Total) 30 20 mA
Power Dissipation[3] (Total) 135 135 mW
Operating Temperature Range –20 to +100 –20 to +100 ˚C
Storage Temperature Range –55 to +100 –55 to +100 ˚C
Reverse Voltage (IR = 100 µA) 5 5 V
Transient Forward Current[4] 500 500 mA
(10 µsec Pulse)
Solder Dipping Temperature 260 for 5 seconds ˚C
(1.6 mm (0.063 inch) below seating plane)
Notes:
1. See Figure 5 to establish pulsed operating conditions.
2. The combined simultaneous current must not exceed the maximum.
3. The combined simultaneous current must not exceed the maximum.
4. The transient peak current is the maximum non-recurring current that can be applied to the device without damaging the LED die and wirebond.
It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the Absolute Maximum Ratings.
Notes:
1. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the single wavelength which defines the color of the device.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. Radiant intensity, le, in watts steradian, may be found from the equation le = Iv/ηV, where Iv is the luminous intensity in candelas and ηV is the luminous
efficacy in lumens/watt.
Electrical/Optical Characteristics at TA = 25˚C
High Efficiency Red Green Yellow
Symbol Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units Test Condition
λPEAK Peak 635 568 583 nm 20 mA
Wavelength
λdDominant 626 570 585 nm 20 mA
Wavelength[1]
τsSpeed of 90 260 90 ns
Response
C Capacitance 11 18 15 pF VF = 0, f = 1 MHz
VFForward 1.9 2.6 2.2 3.0 2.1 2.6 V 20 mA
Voltage
VRReverse 5 5 5 V IR = 100 µA
Voltage
RθJ-PIN Thermal 210 210 210 °C/W Junction-to-
Resistance Cathode Lead
2θ1/2 Included Angle
between half
luminous
intensity points[2]
HLMP-40xx 65 65 65 degree
HLMP-08xx 100 100 100
ηVLuminous 145 595 500 lm/W
Efficacy[3]
4
Figure 1. Relative intensity vs. wavelength.
Figure 2. Forward current vs. forward voltage characteristics. Figure 3. Relative luminous intensity vs. DC forward current.
0
100
80
60
40
20
I
F
– FORWARD CURRENT – mA
2.0 4.03.01.0
V
F
– FORWARD VOLTAGE – V
0 5.0
YELLOW
HIGH EFFICIENCY RED, ORANGE,
YELLOW, AND HIGH PERFORMANCE
GREEN, EMERALD GREEN
HIGH
EFFICIENCY
RED/ORANGE
HIGH 
PERFORMANCE 
GREEN,
EMERALD GREEN
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
0
0
I
DC
– DC CURRENT PER LED – mA
10 20
1.6
0.8
0.4
515 30
1.2
25
0.2
0.6
1.0
1.4
HER, ORANGE, YELLOW, AND HIGH
PERFORMANCE GREEN, EMERALD GREEN
ORANGE
HIGH EFFICIENCY RED
WAVELENGTH – nm
RELATIVE INTENSITY
1.0
0.5
0
500 550 600 650 700 750
YELLOW
EMERALD GREEN
HIGH
PERFORMANCE
GREEN
T
A
= 25° C
Figure 4. Relative efficiency (luminous intensity per unit
current) vs. peak LED current.
Figure 5. Maximum tolerable peak current vs. pulse
duration. (IDC Max. as per maximum ratings.)
RATIO OF MAXIMUM TOLERABLE
PEAK CURRENT TO MAXIMUM
TOLERABLE DC CURRENT
1.0
t
P
– PULSE DURATION – µs
1
3
4
10,0001000
6
5
2
10010
I
PEAK
MAX.
I
DC
MAX.
100 KHz 3 KHz 100 Hz
30 KHz 1 KHz
10 KHz 300 Hz
η
PEAK
– RELATIVE EFFICIENCY
(NORMALIZED AT 20 mA)
0
I
PEAK
– PEAK SEGMENT CURRENT – mA
0.4
0.6
0.8
1.0
9020 705040
1.3
1.1
HIGH PERFORMANCE GREEN
YELLOW
HIGH EFFICIENCY
RED/ORANGE
HER, ORANGE, YELLOW, HIGH
PERFORMANCE GREEN, EMERALD GREEN
0.5
0.7
0.9
1.2
30 60 8010
EMERALD GREEN
5
Note:
All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent
representative for further clarification/information.
Mechanical Option Matrix
Mechanical Option Code Definition
002 Tape & Reel, straight leads, minimum increment 1300 pcs/bag
010 Right Angle Housing, even leads, minimum increment 500 pcs/bag
Figure 6. Relative luminous intensity vs. angular displacement for HLMP-40xx.
10° 100°40° 70°20° 60° 80°30° 50° 90°
0°
10°
20°
30°
40°
50°
60°
70°
80°
90°
1.0
0.6
0.8
0.2
0.4
Figure 7. Relative luminous intensity vs. angular displacement for HLMP-08xx.
10° 100°40° 70°20° 60° 80°30° 50° 90°
0°
10°
20°
30°
40°
50°
60°
70°
80°
90°
1.0
0.6
0.8
0.2
0.4
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152 (Domestic/Interna-
tional), or 0120-61-1280 (Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2003 Agilent Technologies, Inc.
Obsoletes 5988-3775EN
May 30, 2003
5988-9672EN