APEM www.apem.com B-139
AV series
Security pushbutton switches Ø 19 mm (.748)
With illuminated ring - momentary (NC/NO)
B
SPECIFICATIONS
• Travel : 2 mm ±0,3 mm (.003)
• Max. current/voltage rating with resistive load : 1A 30VDC
• LED voltage : 12VDC, 24VDC or 48VDC
(If not supplied by APEM, a resistor must be series-connected by the user)**
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 10 MΩ min. at 500VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals
1.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 250.000 cycles at full load
• Operating force : 5N ± 2N
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Mechanical life : 1.000.000 cycles
• Operating temperature : -20°C to +55°C
• Hand soldering : 350°C, 5 seconds max.
• Packaging unit : flying lead/cable models : 1 piece - other models : 40 pieces
** Resistor value = supply voltage - LED forward voltage
LED forward current
MATERIALS
• Case : polyamide, glass filled
• Contacts : silver
• Bushing : see next page
•
Actuator : see next page
• Elastomeric membrane : silicone
• LED
CUT-OUT
• Panel cut-out : Ø 19,2 mm (.755)
•
Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
NC/NO
ORDER FORMAT
Flat actuator - solder lug terminals Hex nut 22 (.866) across flats
Illuminated (select LED colour above) *
AV9•022
Non-illuminated
AV90022
Bushing dia. 19 mm
SERIES
LED colour
0: no LED - 1: blue - V : green
5 : yellow - 6 : red - 7 : white - 9 : amber
LED resistor
0No resistor supplied
112VDC resistor
224VDC resistor
448VDC resistor
Contacts
2Silver
AV 2
Terminals
2Solder /
quick-connect
FFlying leads
CCable
9
To order a product, select a basic
model below and add the desired LED
colour and voltage. Then select the
desired options on next page.
Options : see next page.
Flat actuator - flying lead terminals Hex nut 22 (.866) across flats
Illuminated (select LED colour & resistor
above)
AV9••2F
Non-illuminated
AV9002F
* No LED resistor supplied on this model.
New!
CAV3-9FCT
ECHELLE 1
CAV9DT-1
ECHELLE 1
3.00
(.118)
22.00
(.866)
(.086)
2.20
(.456)
11.60
(.326)
8.30
Ø22.00
(.866DIA)
(.110x.019)
2.80x0.50
NO
NC
NO NC
(.748DIAx1.00 IS)
Ø19.00x1.00 SI
(.476)
12.10
+
-
CAV9DT-2
ECHELLE 1
3.00
(.118)
(.086)
2.20
(.456)
11.60
Ø22.00
(.866DIA)
(.748DIAx1.00 IS)
Ø19.00x1.00 SI Ø15.00
(.590DIA)
(.472DIA)
Ø12.00
12.10
(.476) (7.874)
200
B-140 APEM www.apem.com
AV series
Security pushbutton switches Ø 19 mm (.748)
With illuminated ring - momentary (NC/NO)
B
New!
CODE BUSHING ACTUATOR
00 Brass, nickel plated Brass, nickel plated
40 Stainless steel 303 Stainless steel 303
4A Stainless steel 304 Stainless steel 304
4B Stainless steel 316 Stainless steel 316
Other : on request.
KFront panel sealing (IP67)
➀internal membrane
➁external gasket
BUSHING/PLUNGER MATERIALS
CODE COLOUR CODE COLOUR
1Blue 6Red
2Black * 7Opal white (std)
3Green 8Translucent
4Grey * 9Orange
5Yellow
* non-illuminated only
RING COLOURS
SEALING
Blank No sealing
After selecting basic model No.,
fill in last 5 boxes
with desired options. BASIC MODEL
Flying lead
protection Flying lead/
cable length Ring
colour Bushing /
plunger mat. Sealing
Flat actuator - cable terminals Hex nut 22 (.866) across flats
Illuminated (select colour & resistor)
AV9••2C
Non-illuminated
AV9002C
0No protection and/or no flying leads
1Heat-shrink sleeves
2Tube + epoxy
FLYING LEAD PROTECTION
000 No flying leads / no cable
020 Length 20 cm (standard)
XXX Length in centimeters
FLYING LEAD/CABLE LENGTH
CAV9DT-3
ECHELLE 1
3.00
(.118)
(.086)
2.20
(.456)
11.60
Ø22.00
(.866DIA)
(.748DIAx1.00 IS)
Ø19.00x1.00 SI
12.10
(.476) (7.874)
200
CAV3ET
2
1
ECHELLE 1
