Photoelectrics Retro-reflective, Polarized Type PMP * * * * * Range: 6 m Modulated, visible light, polarized Make or break switching function (switch selectable) LED-indication for target detected Multi supply voltage: 12 to 240 VDC and 24 to 240 VAC, 50/60 Hz * 25 x 65 x 81 mm reinforced PC/ABS- housing, IP 67 * Timer options (adjustable) * NO and NC output Product Description Ordering Key Retro-reflective photoelectric switch with polarized light. Range up to 6 m. Fixed sensitivity. Immune to ambient light. Output function switch selectable. Protection degree IP 67. Screw terminal connection. 25 x 65 x 81 mm plastic housing. PG 13.5 or 1/2" NPT cable gland. Timer options: Delay on operate, delay on release, one shot (triggered on leading or trailing edge). Type PG 13.5 cable gland Option: Timer function Housing WxHxD Range (Sn) Ordering no. without timer Ordering no. with timer 25 x 65 x 81 PG 13.5 cable gland 1/2" NPT cable gland 6m 6m PMP 6R G PMP 6R I PMP 6R GT PMP 6R IT PMP6.. 6 m with reflector type ER 4, ref. target 0.15 m 10.8 to 264 VDC 21.6 to 264 VAC Operating frequency Response time OFF-ON (tON) ON-OFF (tOFF) Power ON delay (tv) Output function 20 Hz 2 W (2.5 VA) Indication Target detected Optional timer Delay on operate Delay on release One shot Environment Overvoltage category PMP6R G T Type Selection Specifications Rated operating dist. (Sn) (0 to 5,000 lux) Blind zone Rated operational volt. (UB) AC: 45 to 65 Hz Rated operational power (relay ON) Output Contact ratings (AgCdO) Resistive loads AC 1 DC 1 Small inductive loads AC 15 DC 13 Mechanical life (typical) Electrical life (typical) Dielectric voltage Sensitivity Light source Light type Optical angle Light spot size (micro gap) 3 A/250 VAC 3 A/30 VDC 2 A/250 VAC 3 A/30 VDC 40 x 106 operations 5 x 105 operations at 220 VAC - 3 A resistive load: 360 impulses/h 2,000 VAC (rms) (cont./supply) Fixed GaAlAs, LED, 660 nm Visible, modulated 2 280 mm at 4 m Specifications are subject to change without notice (25.06.99) Pollution degree Degree of protection Temperature Operating Storage 20 ms 30 ms 300 ms (typ. 100 ms) Switch selectable, make or break switching LED, yellow 0.1 to 7 s 2 s 0.1 to 7 s 2 s 0.1 to 7 s 2 s III (IEC 60664/60664A; 60947-1) 3 (IEC 60664/60664A; 60947-1) IP 67 (IEC 60529; 60947-1) -25 to +55C (-13 to +131F) -30 to +80C (-22 to +176F) 1 PMP Specifications (cont.) Vibration Shock Rated insulation voltage Housing material Body Front Cover Cable gland Mounting bracket Connection Screw terminal Cable gland Weight Approvals CE-marking 10 to 150 Hz, 0.5 mm/7.5 g (IEC 60068-2-6) 2 x 1 m & 100 x 0.5 m (IEC 60068-2-32) 250 VAC (rms) PC/ABS, grey PA, red PC, black PA, black, reinforced Steel, black Selection of Function Switch 1 2 3 PMP 6R . 1 Break switching 2 Make switching 3 Delay on operate Break switching PMP 6R .T 4 Delay on operate Make switching 5 Delay on release Break switching 5 x 2 x 1 mm2 PG 13.5 or 1/2" NPT for cable 6 to 10 mm 110 g UL, CSA Yes 6 Delay on release Make switching 7 One shot, trailing edge Break switching 8 One shot, trailing edge Make switching Connection Diagram 9 One shot, leading edge Break switching Time adjustment (optional) 10 One shot, leading edge Make switching Don't care Upper postion ON (Mode 1) Lower position OFF (Mode 0) LED DIP switches 12 - 240 VDC 24 - 240 VAC 50/60 Hz Truth Table Make switching 30 VDC 250 VAC Max. 3 A Object present Yes No Yes No LED OFF ON OFF ON Load Nonactive Active Active Nonactive Accessories Delivery Contents * Reflectors: ER series * MB02 (longer mounting bracket) * * * * * For further information refer to "Accessories". 2 Break switching Photoelectric switch: PMP Cable gland Installation instruction Mounting bracket Packaging: Corrugated cardboard (environmentally friendly recycling material) Specifications are subject to change without notice (25.06.99) PMP Operation Diagram t = Time delay tv = Power ON delay Power supply Target present Object present Func 1. Output ON Func 2. Output ON Func 3. Output ON Func 4. Output ON Func 5. Output ON Func 6. Output ON Func 7. Output ON Func 8. Output ON Func 9. Output ON Func 10. Output ON Dimensions PMP with angle bracket or 1/2" NPT PMP Specifications are subject to change without notice (25.06.99) 3