Product - Specification 1st April 2003 ISSUE 2 TYPE CPG SERIES Thick Film Chip Resistors (semi-precision) KEY FEATURES TYPE CPG SERIES Precious metal terminations are screen printed onto a ceramic base and fired. The resistive element is screen printed and fired and the passivation layer added. Each resistor is trimmed to tolerance by laser. The pre-scribed tile is broken into strips, the end plating is fired on and the strips broken into individual components. Final termination is made by electroplating. * * * * Case sizes 0603, 0805, 1206 A semi-precision thick film resistor with a temperature coefficient of 50ppm/C and tolerance down to 0.5%. CPG chip resistors are suitable for most applications, including high frequency operation, owing to the short lead structure and low capacitance. Particularly suitable for use where low TC or tolerance are important at a low cost. STOCKISTS: This product is not available in Distribution. Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484 Page 1 of 3 Website - www.resistors.tycoelectronics.com Email - passivesales@tycoelectronics.com Product - Specification 1st April 2003 ISSUE 2 TYPE CPG SERIES SPECIFICATIONS Rated Power @ 70 C Resistance Range Min Max Tolerance Code letter Selection Series Temperature Coefficient Code Letter Limiting Element Voltage Max Overload Voltage Dielectric Strength Min Operating Temperature Range Climatic Category Insulation Resistance Dry Min Stability Surface Temperature Rise Max UNITS 0603 0805 Watts Ohms Ohms % 0.063 0.1 ppm/C Volts Volts V C 100 1M1 0.5 D 50 C 10 91 100 D 50 100 100 100 1M0 1 F 1M1 3M3 10 3M3 0.5 D E24 E96 100 50 D C 150 300 300 -55 to +125 55/125/56 1000 0.5 400 50 C Mohms % C DIMENSIONS STYLE 0603 0805 1206 1206 0.125 10 3M3 1 F 10 4M7 0.5 D 10 4M7 1 F 50 C 50 C 200 400 400 50 C L W T a b 1.6 0.1 2 0.1 3.2 0.15 0.85 0.1 1.25 0.1 1.6 0.15 0.45 0.1 0.6 0.1 0.66 0.1 0.25 0.1 0.4 0.2 0.5 0.25 0.3 0.1 0.4 0.2 0.5 0.25 DERATING CURVE MARKING E24 series resistors are marked with a three digit code. E96 series resistors are marked with a four digit code. 0603 E96 series are unmarked. MOUNTING The resistors are suitable for processing on automatic insertion equipment. Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484 Page 2 of 3 Website - www.resistors.tycoelectronics.com Email - passivesales@tycoelectronics.com Product - Specification 1st April 2003 ISSUE 2 TYPE CPG SERIES PACKAGING All chip resistors are supplied on reels of 5000 pieces. For details, see figures 1 - 2. Also available in bulk cassettes. Tape Width A tol B tol t1 tol t2 max 0603 0805 1206 8 1.15 0.15 1.9 0.2 0.6 0.1 0.8 8 1.65 0.15 2.5 0.2 0.8 0.1 1 8 2 0.15 3.6 0.2 0.8 0.1 1 PERFORMANCE CHARACTERISTICS The evaluation of the performance characteristics is carried out with reference to IECQ specifications QC 400 000 and QC 400 100. TEST REF 4.23 4.24 4.25.1 4.25.3 TEST REF 4.13 4.32 4.33 4.19 4.18 Long Term Tests (5% + 0.1 ohm) Climatic sequence Damp heat, steady state Endurance at 70 C Endurance at 125 C Short Term Tests (1% + 0.05 ohm) Overload Adhesion Bond strength of end face plating Rapid change of temperature Resistance to soldering heat STORAGE Unopened reels should be stored within a temperature range of +5 C to +25 C, separated from any dust, chemicals and solvent based materials. Non-adherence to this procedure could affect the solderability of this product. HOW TO ORDER Orders for these components should include the following information:Type, tolerance code letter, value and temperature coefficient code letter e.g. CPG0603 F 1K0 C This publication is issued to provide outline information only and (unless specifically agreed to the contrary by the Company in writing) is not to form part of any order or be regarded as a representation relating to the products or service concerned. We reserve the right to alter without notice the specification, design, price or conditions of supply of any product or service. Whilst Tyco Electronics Components products are of the very highest quality and reliability, all electronic components can occasionally be subject to failure. Where failure of a Tyco Electronics Components product could result in life threatening consequences, then the circuit and application must be discussed with the Company. Such areas might include ECG, respiratory and other medical and nuclear applications and any non fail-safe applications circuit. Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484 Page 3 of 3 Website - www.resistors.tycoelectronics.com Email - passivesales@tycoelectronics.com