TYPE CPG SERIES
Product – Specification
1st April 2003
ISSUE 2
Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484
Website – www.resistors.tycoelectronics.com Email – passivesales@tycoelectronics.com
Page 3 of 3
PACKAGING
All chip resistors are supplied on reels of 5000 pieces. For details, see figures 1 - 2. Also available in bulk cassettes.
PERFORMANCE CHARACTERISTICS
The evaluation of the performance characteristics is carried out with reference to IECQ specifications QC 400 000 and QC 400 100.
STORAGE
Unopened reels should be stored within a temperature range of +5 °C to +25 °C, separated from any dust, chemicals and
solvent based materials. Non-adherence to this procedure could affect the solderability of this product.
HOW TO ORDER
Orders for these components should include the following information:-
Type, tolerance code letter, value and temperature coefficient code letter e.g. CPG0603 F 1K0 C
0603 0805 1206
Tape Width 8 8 8
A
tol
1.15
± 0.15
1.65
± 0.15
2
± 0.15
B
tol
1.9
± 0.2
2.5
± 0.2
3.6
± 0.2
t1
tol
0.6
± 0.1
0.8
± 0.1
0.8
± 0.1
t2 max 0.8 1 1
TEST REF Long Term Tests ±(5% + 0.1 ohm)
4.23 Climatic sequence
4.24 Damp heat, steady state
4.25.1 Endurance at 70 °C
4.25.3 Endurance at 125 °C
TEST REF Short Term Tests ±(1% + 0.05 ohm)
4.13 Overload
4.32 Adhesion
4.33 Bond strength of end face plating
4.19 Rapid change of temperature
4.18 Resistance to soldering heat
This publication is issued to provide outline information only and (unless specifically agreed to the contrary by the Company in writing) is not to form part of any order or be
regarded as a representation relating to the products or service concerned. We reserve the right to alter without notice the specification, design, price or conditions of
supply of any product or service. Whilst Tyco Electronics Components products are of the very highest quality and reliability, all electronic components can occasionally
be subject to failure. Where failure of a Tyco Electronics Components product could result in life threatening consequences, then the circuit and application must
be discussed with the Company. Such areas might include ECG, respiratory and other medical and nuclear applications and any non fail-safe applications circuit.