PROTEKTIVE PAK
13520 MONTE VISTA AVENUE, CHINO, CA 91710
PHONE (909) 627-2578, FAX (909) 363-7331
ProtektivePak.com
DRAWING NUMBER
47123
DATE:
February
2012
© 2012 DESCO INDUSTRIES INC.
Employee Owned
Statfree® Document Holder, 6 Mil
Made in the
United States of America
Statfree®
B Size
Document Holder
47123 / 07456
Made in America
DescoIndustries.com
Specications and procedures subject to change without notice.
Inside Dimension Tolerances are -0/+1/4" unless specied
“It should be understood that any object, item, material or
person could be a source of static electricity in the work
environment. Removal of unnecessary nonconductors,
replacing nonconductive materials with dissipative or
conductive materials and grounding all conductors are
the principle methods of controlling static electricity in the
workplace, regardless of the activity.” [ESD Handbook ESD
TR20.20-2008 section 2.4 Sources of Static Electricity]
Opening
17 - 1/4"
11 - 1/4"
Description:
This product is designed for use in ESD controlled areas where there are ESD susceptible
devices. This product is constructed out of 6 mil, clear, permanently dissipative
polyethylene film. Document holders are designed to provide static control packaging for
holding engineering drawings or other large documents.
Amine-free.
N-Octanoic acid free.
Humidity independent.
Does not promote corrosion.
Has no measurable outgassing.
Electrical Properties:
Static Decay: < 2.0 sec. per FTMS 101C, Method 4046
Surface Resistance: 10E4 to < 10E11 ohms per ANSI/ESD STM11.11
Specifications:
Polycarbonate haze: Negligible 72 hr contact
Corrosivity: Neglibible per FTMS 101C, Method 3005
Melt Index: .050 gm/10 min. per ASTM D-1238
Density: 0.923 gm/cc per ASTM D-1505
Dart impact: 230 gms per ASTM D-1709
Coefficient of friction: 0.50 per ASTM D-1894
1% secant modulus: MD 24,000 psi per ASTM D-882
Stiffness: MD 25,000 psi per ASTM D-882
A. B size document holder will hold up to an 11" x 17" sheet size.
Wording across bottom area:
