UL Ratings
CONTACTS
Arrangement SPST- N.O. (1 Form A)
Ratings Resistive load:
Max. switched power: 150W or 1250VA
Max. switched current: 5A
Max. switched voltage: 30VDC or 250VAC
5A at 30VDC resistive
5A at 250VAC resistive
Material Options:
Silver tin oxide
Silver tin oxide with gold plating
Resistance
< 100 milliohms initially
(6V, 1A, voltage drop method)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
COIL
Power
At Pickup Voltage
100mW
(typical)
Max. Continuous
Dissipation
Temperature Rise
550mW at 20°C (68°F) ambient
420mW at 40°C (104°F) ambient
25°C (45°F) at nominal coil voltage
Temperature Max. 105°C (221°F)
AZ6951
2/08/16
SENSITIVE
SUBMINIATURE RELAY
FEATURES
•Extremely small footprint utilizing only 0.18 square inch
of PCB area
•Thin vertical profile only 0.25" wide
•1 Form A contact with up to 5 Amp switching capability
•
High sensitivity, 100mW pickup
•
Dielectric strength 3000Vrms contact to coil
•
Coils to 24VDC
•Epoxy sealed for automatic wave soldering
and cleaning
•UL/CUR File E43203
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
20 million operations
1 X 105 at 5A, 30VDC or 250VAC Res.
Operate Time (typical)
6ms at nominal coil voltage
Release Time (typical)
3ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.)
750Vrms between open contacts
3000Vrms contact to coil
Insulation 1000 megohms min. at 20°C, 500 VDC,
Resistance 50% RH
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
-25°C (-30°F) to 70°C (158°F)
-40°C (-40°F) to 105°C (221°F)
Vibration 0.062" DA at 10–55 Hz
Shock 10 g
Enclosure P.B.T. polyester
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 3 grams
AZ6951
2/08/16
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
MECHANICAL DATA
0.2
(5.08)
WIRING DIAGRAMPC BOARD LAYOUT
Viewed toward terminalsViewed toward terminals
0.1
(2.54)
0.3
(7.62)
0.2
(5.08)
.043
(1.1)
DIA
75 1
13
0.689
(17.50)
0.02
(0.50)
0.488
(12.40)
0.138
(3.50)
0.252
(6.40)
0.012
(0.30)
0.02
(0.50)
0.031
(0.80)
0.2
(5.08)
0.1
(2.54)
0.044
(1.13)
0.3
(7.62)
0.2
(5.08)
* Add suffix “G” for gold plated contacts
ORDER NUMBER*
RELAY ORDERING DATA
COIL SPECIFICATIONS
Nominal Coil Max. Continuous Coil Resistance Must Operate 1 Form A
VDC VDC ± 10% VDC (SPST- N.O.)
5 6.5 125 3.5 AZ6951–5
6 7.8 180 4.2 AZ6951–6
9 11.7 405 6.3 AZ6951–9
12 15.6 720 8.4 AZ6951–12
18 23.4 1,620 12.6 AZ6951–18
24 31.2 2,880 16.8 AZ6951–24
