TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 D D D D D D Output Swing Includes Both Supply Rails Extended Common-Mode Input Voltage Range . . . 0 V to 4.25 V (Min) at 5-V Single Supply No Phase Inversion Low Noise . . . 16 nV/Hz Typ at f = 1 kHz Low Input Offset Voltage 950 V Max at TA = 25C (TLV244xA) Low Input Bias Current . . . 1 pA Typ D D D D D 600- Output Drive High-Gain Bandwidth . . . 1.8 MHz Typ Low Supply Current . . . 750 A Per Channel Typ Macromodel Included Available in Q-Temp Automotive HighRel Automotive Applications Configuration Control/Print Support Qualification to Automotive Standards HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT description 3 VDD = 3 V VOH - High-Level Output Voltage - V The TLV244x and TLV244xA are low-voltage operational amplifiers from Texas Instruments. The common-mode input voltage range of these devices has been extended over typical standard CMOS amplifiers, making them suitable for a wide range of applications. In addition, these devices do not phase invert when the common-mode input is driven to the supply rails. This satisfies most design requirements without paying a premium for rail-to-rail input performance. They also exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. This family is fully characterized at 3-V and 5-V supplies and is optimized for low-voltage operation. Both devices offer comparable ac performance while having lower noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLV244x has increased output drive over previous rail-to-rail operational amplifiers and can drive 600- loads for telecommunications applications. 2.5 2 TA = - 40C 1.5 1 TA = 125C 0.5 TA = 85C TA = 25C 0 0 2 4 6 8 10 12 IOH - High-Level Output Current - mA Figure 1 The other members in the TLV244x family are the low-power, TLV243x, and micro-power, TLV2422, versions. The TLV244x, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels and low-voltage operation, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single- or split-supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLV244xA is available with a maximum input offset voltage of 950 V. If the design requires single operational amplifiers, see the TI TLV2211/21/31. This is a family of rail-to-rail output operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Advanced LinCMOS is a trademark of Texas Instruments. Copyright 2001, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 TLV2442 AVAILABLE OPTIONS PACKAGED DEVICES VIOmax AT 25C TA SMALL OUTLINE (D) CHIP CARRIER (FK) CERAMIC DIP (JG) TSSOP (PW) CERAMIC FLAT PACK (U) 0C to 70C 2.5 mV TLV2442CD -- -- TLV2442CPW -- - 40C to 85C 950 V 2.5 mV TLV2442AID TLV2442ID -- -- -- -- TLV2442AIPW -- -- -- - 40C to 125C 950 V 2.5 mV TLV2442AQD TLV2442QD -- -- -- -- TLV2442AQPW TLV2442QPW -- -- - 55C to 125C 950 V 2.5 mV -- -- TLV2442AMFK TLV2442MFK TLV2442AMJG TLV2442MJG -- -- TLV2442AMU TLV2442MU The D and PW packages are available taped and reeled. Add R suffix to device type (e.g., TLV2442CDR). TLV2444 AVAILABLE OPTIONS PACKAGED DEVICES TA VIOmax AT 25C SMALL OUTLINE (D) TSSOP (PW) 0C to 70C 2.5 mV TLV2444CD TLV2444CPW - 40C to 125C 950 V 2.5 mV TLV2444AID TLV2444ID TLV2444AIPW TLV2444IPW The D and PW packages are available taped and reeled. Add R suffix to device type (e.g., TLV2444CDR). TLV2442 D OR JG PACKAGE (TOP VIEW) 1OUT 1IN - 1IN + VDD - /GND 1 8 2 7 3 6 4 5 NC 1OUT NC VDD+ NC 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 NC 2OUT NC 2IN - NC NC 1OUT 1IN - 1IN + VDD - /GND 1 10 2 9 3 8 4 7 5 6 POST OFFICE BOX 655303 8 7 6 5 VDD + 2OUT 2IN - 2IN + TLV2444 D OR PW PACKAGE (TOP VIEW) NC VDD + 2OUT 2IN - 2IN + NC - No internal connection 2 1 2 3 4 TLV2442 U PACKAGE (TOP VIEW) NC VDD- /GND NC 2IN+ NC 4 1OUT 1IN- 1IN + VDD - / GND VDD + 2OUT 2IN - 2IN + TLV2442 FK PACKAGE (TOP VIEW) NC 1IN - NC 1IN + NC TLV2442 PW PACKAGE (TOP VIEW) * DALLAS, TEXAS 75265 1OUT 1IN - 1IN+ VDD+ 2IN+ 2IN - 2OUT 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN - 4IN+ VDD-/GND 3IN+ 3IN - 3OUT equivalent schematic (each amplifier) COMPONENT COUNT Q22 Q29 Q31 Q34 Transistors Diodes Resistors Capacitors Q36 VB3 69 5 26 6 Q26 Q24 Q32 VB2 VB1 VDD+ Q25 Q35 Q33 Q27 Q30 Q37 R10 D1 R9 R3 Q3 R4 R7 Q13 IN- Q1 Q6 Q4 Q8 Q15 Q10 Q18 Q7 R5 Q9 C2 VDD-/GND C1 VB3 Q11 Q16 R6 OUT C3 VB2 Q2 Q14 Q5 Q17 Q12 R1 Q21 Q19 R2 R8 VB4 3 SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 Q20 IN+ TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 Q23 VB4 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDD Input voltage, VI (any input, see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 0.3 V to VDD Input current, II (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 mA Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Total current into VDD + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Total current out of VDD - . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Duration of short-circuit current at (or below) 25C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C I suffix (dual) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 40C to 85C I suffix (quad) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 40C to 125C Q suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 40C to 125C M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 55C to 125C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VDD+ and VDD -. 2. Differential voltages are at IN+ with respect to IN -. Excessive current will flow if input is brought below VDD - - 0.3 V. 3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded. DISSIPATION RATING TABLE PACKAGE TA 25C POWER RATING DERATING FACTOR ABOVE TA = 25C TA = 70C POWER RATING TA = 85C POWER RATING TA = 125C POWER RATING D (8) D (14) FK JG PW (8) PW (14) U 725 mW 1022 mW 1375 mW 1050 mW 525 mW 720 mW 675 mW 5.8 mW/C 7.6 mW/C 11.0 mW/C 8.4 mW/C 4.2 mW/C 5.6 mW/C 5.4 mW/C 464 mW 900 mW 880 mW 672 mW 336 mW 634 mW 432 mW 377 mW 777 mW 715 mW 546 mW 273 mW 547 mW 350 mW 145 mW 450 mW 275 mW 210 mW 105 mW 317 mW 135 mW recommended operating conditions C SUFFIX MIN Supply voltage, VDD MAX M SUFFIX MAX 10 2.7 VDD - VDD + - 1.3 VDD - VDD + - 1.3 V Common-mode input voltage, VIC VDD - VDD + - 1 VDD - VDD + - 1 VDD - + 2 VDD + - 1.3 VDD - + 2 VDD + - 1.3 V 125 - 40 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 - 55 10 UNIT VDD + - 1 125 2.7 MAX VDD - - 40 10 MIN VDD + - 1 70 2.7 Q SUFFIX MIN VDD - 0 10 I SUFFIX MIN Input voltage range, VI Operating free-air temperature, TA 2.7 MAX 125 V C TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted) PARAMETER TEST CONDITIONS TLV244xC TLV244xI VIO Input offset voltage TLV244xAI TLV2442AQ TLV2442AM VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO TA TLV2442 MIN 25C Input offset current Input bias current 300 Full range 25C 300 High-level output voltage IO = - 3 mA VIC = 1.5 V, 25C 0.002 V/mo 25C 0.5 VOL AVD Low-level output voltage Large-signal L i l diff differential ti l voltage am amplification lification VIC = 1 1.5 5V V, VO = 1 V to 2 V IO = 3 mA RL = 600 RL = 1 M rid Differential input resistance ri Common-mode input resistance ci Common-mode input capacitance f = 10 kHz 60 150 1 150 125C 350 Full range 260 0 to 2.25 0 to 2.25 125C 0 to 2 pA -0.25 to 2.5 0 to 2 25C to -55C pA 60 -40C to 85C V -0.25 to 2.5 25C 2.98 25C 2.5 Full range IO = 100 A 950 1600 V/C RS = 50 IO = - 100 A VOH V 2 Full range |VIO| 5 mV mV, 950 1500 Full range 25C Common-mode input voltage g range 2000 Full range TLV2442Q/AQ TLV2442M/AM VICR 300 UNIT 2500 25C 25C IIB MAX Full range 25C to 85C VIC = 1 1.5 5V V, VO = 1.5 V, RS = 50 TYP V 2.25 25C 0.02 25C 0.63 Full range V 1 25C 0.7 Full range 0.4 1 V/mV 25C 750 25C 1000 G 25C 1000 G 25C 8 pF zo Closed-loop output impedance f = 1 MHz, AV = 10 25C 130 Full range for the C suffix is 0C to 70C. Full range for the dual I suffix is - 40C to 85C. Full range for the quad I suffix is - 40C to 125C. Full range for the Q suffix is - 40C to 125C. Full range for the M suffix is - 55C to 125C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted) (continued) PARAMETER CMRR Common-mode rejection ratio TA TEST CONDITIONS VIC = 0 tto 2 2.25 25 V V, VO = 1 1.5 5V V, RS = 50 kSVR Supply-voltage y g rejection j ratio (VDD /VIO) VDD = 2.7 V to 8 V,, No load IDD Supply current (per channel) VO = 1.5 V, No load TLV2442Q/AQ TLV2442M/AM TLV2442 MIN TYP 25C 65 75 Full range 55 Full range 50 25C 80 Full range 80 VIC = VDD/2,, 25C MAX UNIT dB 95 725 Full range dB 1100 1100 A Full range for the C suffix is 0C to 70C. Full range for the dual I suffix is - 40C to 85C. Full range for the quad I suffix is - 40C to 125C. Full range for the Q suffix is - 40C to 125C. Full range for the M suffix is - 55C to 125C. operating characteristics at specified free-air temperature, VDD = 3 V PARAMETER SR TEST CONDITIONS VO = 1 V to 2 V, RL = 600 , CL = 100 pF Slew rate at unity gain Vn Equivalent input noise voltage VN(PP) Peak to peak equivalent input noise voltage Peak-to-peak In Equivalent input noise current THD + N BOM ts m Total harmonic distortion plus noise TLV2442Q/AQ TLV2442M/AM TLV244x MIN TYP 25C 0.65 1.3 Full range 0.65 Full range 0.4 25C 170 f = 1 kHz 25C 18 f = 0.1 Hz to 1 Hz 25C 2.6 f = 0.1 Hz to 10 Hz 25C 5.1 25C VO = 0.5 V to 2.5 V, RL = 600 , f = 1 kHz AV = 1 AV = 10 RL = 600 ,, output swing bandwidth Maximum output-swing VO(PP) = 1 V,, AV = 1, RL = 600 ,, CL = 100 pF Settling time AV = - 1, Step = - 2.3 V to 2.3 V,, RL = 600 , CL = 100 pF RL = 600 , 25C 0.6 nV/Hz V fA/Hz 0.3% 2% 25C 1 75 1.75 MHz 25C 09 0.9 MHz To 0.1% 0 1% 15 1.5 s 25C 0 01% To 0.01% CL = 100 pF UNIT 0.08% AV = 100 f =10 kHz,, CL = 100 pF MAX V/s f = 10 Hz Gain bandwidth product Gain-bandwidth Phase margin at unity gain TA 32 3.2 25C 65 Gain margin 25C 9 dB Full range for the C suffix is 0C to 70C. Full range for the dual I suffix is - 40C to 85C. Full range for the quad I suffix is - 40C to 125C. Full range for the Q suffix is - 40C to 125C. Full range for the M suffix is - 55C to 125C. 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted) PARAMETER TEST CONDITIONS TLV244xC TLV244xI VIO Input offset voltage TLV244xA TLV2442AQ TLV2442AM VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO TA TLV244x MIN 25C VIC = 0, RS = 50 Input offset current Input bias current 300 Full range |VIO| 5 mV mV, 25C 300 VOL AVD High-level output voltage 25C 0.002 V/mo 25C 0.5 Low-level output voltage Large-signal L i l diff differential ti l voltage am amplification lification 1 150 125C 350 Full range 260 0 to 4.25 pA 60 -40C to 85C -0.25 to 4.5 pA V 0 to 4 4.97 25C 4 Full range 4 V 4.35 VIC = 2.5 V, IOL = 100 A VIC = 2 2.5 5V V, IOL = 5 RL = 600 25C 0.9 VIC = 2.5 2 5 V, V VO = 1 V to 4 V Full range 0.5 RL = 1 M 25C 950 mA 60 150 25C IOH = - 5 mA 950 1600 V/C Full range VOH V 2 RS = 50 IOH = - 100 A 950 1500 Full range 25C Common-mode input voltage g range 2000 Full range TLV2442Q/AQ TLV2442M/AM VICR 300 UNIT 2500 25C 25C IIB MAX Full range 25C to 85C VDD = 2.5 V, VO = 0, TYP 25C 0.01 25C 0.8 Full range V 1.25 1.3 V/mV rid Differential input resistance 25C 1000 G ri Common-mode input resistance 25C 1000 G ci Common-mode input capacitance f = 10 kHz 25C 8 pF zo Closed-loop output impedance f = 1 MHz, AV = 10 25C 140 CMRR Common mode rejection ratio Common-mode VIC = 0 to 4.25 V,, RS = 50 VO = 2.5 V,, 25C 70 Full range 70 75 dB Full range for the C suffix is 0C to 70C. Full range for the dual I suffix is - 40C to 85C. Full range for the quad I suffix is - 40C to 125C. Full range for the Q suffix is - 40C to 125C. Full range for the M suffix is - 55C to 125C. Referenced to 2.5 V NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted) (continued) PARAMETER TEST CONDITIONS kSVR Supply voltage rejection ratio (VDD /VIO) Supply-voltage VDD = 4.4 V to 8 V,, VIC = VDD /2, No load IDD Supply current (per channel) VO = 2 2.5 5V V, No load TA TLV244x MIN TYP 25C 80 95 Full range 80 25C 750 Full range MAX UNIT dB 1100 1100 A Full range for the C suffix is 0C to 70C. Full range for the dual I suffix is - 40C to 85C. Full range for the quad I suffix is - 40C to 125C. Full range for the Q suffix is - 40C to 125C. Full range for the M suffix is - 55C to 125C. operating characteristics at specified free-air temperature, VDD = 5 V PARAMETER SR Slew rate at unity gain TEST CONDITIONS VO = 0.5 0 5 V to t 2.5 2 5 V, V RL = 600 , CL = 100 pF TLV2442Q/AQ TLV2442M/AM TYP 1.4 25C 0.75 Full range 0.75 Full range 0.5 130 25C 16 f = 0.1 Hz to 1 Hz 25C 1.8 f = 0.1 Hz to 10 Hz 25C 3.6 25C 0.6 Peak-to-peak equivalent q input noise voltage In Equivalent input noise current THD + N Total harmonic distortion plus noise VO = 1.5 V to 3.5 V, f = 1 kHz, RL = 600 Gain-bandwidth product f =10 kHz, CL = 100 pF RL = 600 , BOM Maximum output-swing bandwidth VO(PP) = 2 V, RL = 600 , AV = 1, CL = 100 pF ts Settling time AV = - 1, Step = 0.5 V to 2.5 V,, RL = 600 , CL = 100 pF RL = 600 , AV = 1 AV = 10 UNIT nV/Hz V fA/Hz 0.017% 25C AV = 100 0.17% 1.5% 25C 1.81 MHz 25C 0.5 MHz To 0.1% 1.5 s 25C To 0.01% CL = 100 pF MAX V/s 25C VN(PP) Gain margin MIN f = 1 kHz Equivalent input noise voltage Phase margin at unity gain TLV244x f = 10 Hz Vn m TA 2.6 25C 68 8 dB Full range for the C suffix is 0C to 70C. Full range for the dual I suffix is - 40C to 85C. Full range for the quad I suffix is - 40C to 125C. Full range for the Q suffix is - 40C to 125C. Full range for the M suffix is - 55C to 125C. Referenced to 2.5 V 8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 25C TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS Table of Graphs FIGURE VIO Input offset voltage Distribution vs Common-mode input voltage VIO IIB /IIO Input offset voltage temperature coefficient Distribution Input bias and input offset currents vs Free-air temperature VOH VOL High-level output voltage vs High-level output current 9, 10 Low-level output voltage vs Low-level output current 11, 12 VO(PP) Maximum peak-to-peak output voltage vs Frequency 13 IOS Short circuit output current Short-circuit vs Supplyy voltage g vs Free-air temperature 14 15 VO AVD Output voltage vs Differential Input voltage Differential voltage amplification vs Load resistance Large signal differential voltage amplification and phase margin Large-signal vs Frequency 19 20 19, Large signal differential voltage amplification Large-signal Free air temperature vs Free-air 21 22 21, zo Output impedance vs Frequency 23, 24 CMRR Common mode rejection ratio Common-mode vs Frequency q y vs Free-air temperature 25 26 kSVR Supply voltage rejection ratio Supply-voltage vs Frequency q y vs Free-air temperature 27,, 28 29 IDD Supply current vs Supply voltage 30 SR Slew rate vs Load capacitance vs Free-air temperature 31 32 AVD VO THD + N m 6, 7 8 16, 17 18 Inverting large-signal pulse response 33, 34 Voltage-follower large-signal pulse response 35, 36 Inverting small-signal pulse response 37, 38 Voltage-follower small-signal pulse response Vn 2,, 3 4, 5 39, 40 Equivalent input noise voltage vs Frequency Noise voltage Over a 10-second period Total harmonic distortion plus noise vs Frequency Gain bandwidth product Gain-bandwidth vs Free-air temperature vs Supply voltage Phase margin vs Frequency q y vs Load capacitance 19,, 20 48 Gain margin vs Load capacitance 49 vs Load capacitance 50 B1 Unity-gain bandwidth For all graphs where VDD = 5 V, all loads are referenced to 2.5 V. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 41, 42 43 44, 45 46 47 9 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS DISTRIBUTION OF TLV2442 INPUT OFFSET VOLTAGE 18 10 8 6 4 12 10 8 6 4 0 -700 -600 -500 -400 600 700 800 900 0 -300 -200 -100 0 100 200 300 400 500 2 -700 2 VIO - Input Offset Voltage - V VIO - Input Offset Voltage - V Figure 2 Figure 3 INPUT OFFSET VOLTAGE vs COMMON-MODE INPUT VOLTAGE INPUT OFFSET VOLTAGE vs COMMON-MODE INPUT VOLTAGE 2 2 VDD = 3 V TA = 25C 1.5 VIO - Input Offset Voltage - mV VIO - Input Offset Voltage - mV 1.5 1 0.5 0 -0.5 -1 -1.5 -2 -0.5 VDD = 5 V TA = 25C 1 0.5 0 -0.5 -1 -1.5 0 0.5 1 1.5 2 2.5 3 -2 -0.5 0 VIC - Common-Mode Input Voltage - V 0.5 1 1.5 2 Figure 5 POST OFFICE BOX 655303 2.5 3 3.5 4 VIC - Common-Mode Input Voltage - V Figure 4 10 500 600 700 800 900 12 14 300 400 14 16 -100 0 100 200 TA = 25C 868 Amplifiers From 1 Wafer Lot VDD = 2.5 V TA = 25C -300 -200 16 20 Percentage of Amplifiers - % 18 868 Amplifiers From 1 Wafer Lot VDD = 1.5 V -600 -500 -400 Percentage of Amplifiers - % 20 DISTRIBUTION OF TLV2442 INPUT OFFSET VOLTAGE * DALLAS, TEXAS 75265 4.5 5 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS DISTRIBUTION OF TLV2442 INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT DISTRIBUTION OF TLV2442 INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT 15 18 32 Amplifiers From 1 Wafer Lot VDD = 1.5 V P Package 25C to 125C 15 Percentage of Amplifiers - % Percentage of Amplifiers - % 12 32 Amplifiers From 2 Wafer Lots VDD = 2.5 V P Package 25C to 125C 9 6 3 12 9 6 3 0 -8 -7 -6 0 -5 -4 -3 -2 -1 0 1 2 3 4 -8 -7 -6 VIO - Temperature Coefficient - V/C 0 1 2 3 4 Figure 7 Figure 6 HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT INPUT BIAS AND INPUT OFFSET CURRENTS vs FREE-AIR TEMPERATURE 3 35 VDD = 2.5 V VIC = 0 VO = 0 RS = 50 30 VDD = 3 V 25 20 IIB 15 IIO 10 5 0 VOH - High-Level Output Voltage - V IIB I IO - Input Bias and Input Offset Currents - pA IIB and IIO -5 -4 -3 -2 -1 VIO - Temperature Coefficient - V/C 2.5 2 TA = - 40C 1.5 1 TA = 125C 0.5 TA = 85C TA = 25C 0 25 45 65 85 105 125 TA - Free-Air Temperature - C 0 2 4 6 8 10 12 IOH - High-Level Output Current - mA Figure 8 Figure 9 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 11 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 5 3 VDD = 5 V VDD = 3 V 4 TA = - 40C 3.5 VOL - Low-Level Output Voltage - V VOH - High-Level Output Voltage - V 4.5 TA = 25C 3 2.5 2 TA = 125C 1.5 TA = 85C 1 0.5 0 2.5 TA = 125C 2 TA = 85C 1.5 1 TA = 25C TA = - 40C 0.5 0 0 5 10 15 20 25 0 2 IOH - High-Level Output Current - mA Figure 10 2 TA = 125C 1.5 TA = 85C 1 TA = 25C 0.5 TA = - 40C 0 6 8 10 VO(PP) - Maximum Peak-to-Peak Output Voltage - V VOL - Low-Level Output Voltage - V VDD = 5 V 4 10 5 RL = 600 VDD = 5 V 4 3 VDD = 3 V 2 1 0 100 IOL - Low-Level Output Current - mA 1k 10 k Figure 13 POST OFFICE BOX 655303 100 k f - Frequency - Hz Figure 12 12 8 MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY 2.5 2 6 Figure 11 LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 0 4 IOL - Low-Level Output Current - mA * DALLAS, TEXAS 75265 1M 10 M TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS SHORT-CIRCUIT OUTPUT CURRENT vs SUPPLY VOLTAGE SHORT-CIRCUIT OUTPUT CURRENT vs FREE-AIR TEMPERATURE 25 VO = VDD/2 VIC = VDD/2 TA = 25C 20 I OS - Short-Circuit Output Current - mA I OS - Short-Circuit Output Current - mA 25 VID = -100 mV 15 10 5 0 -5 -10 -15 VID = 100 mV -20 -25 2 3 4 5 6 7 8 9 15 VID = -100 mV 10 5 0 -5 -10 VID = 100 mV -15 -20 -25 -75 10 VDD = 5 V VO = 2.5 V 20 -50 Figure 14 25 50 75 100 125 OUTPUT VOLTAGE vs DIFFERENTIAL INPUT VOLTAGE 5 3 VDD = 3 V VIC = 1.5 V RL = 600 TA = 25C 4 VO - Output Voltage - V VO - Output Voltage - V 0 Figure 15 OUTPUT VOLTAGE vs DIFFERENTIAL INPUT VOLTAGE 2.5 -25 TA - Free-Air Temperature - C VDD - Supply Voltage - V 2 1.5 1 VDD = 5 V VIC = 2.5 V RL = 600 TA = 25C 3 2 1 0.5 0 -1000 -750 -500 -250 0 250 500 750 1000 0 -1000 -750 -500 -250 0 250 500 750 1000 VID - Differential Input Voltage - V VID - Differential Input Voltage - V Figure 16 Figure 17 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 13 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS DIFFERENTIAL VOLTAGE AMPLIFICATION vs LOAD RESISTANCE A VD - Differential Voltage Amplification - V/mV 100 VO(PP) = 2 V TA = 25C VDD = 5 V VDD = 3 V 10 1 0.1 1 10 100 1000 RL - Load Resistance - k Figure 18 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE MARGIN vs FREQUENCY VDD = 3 V RL = 600 CL = 600 pF TA = 25C AVD AVD- Large-Signal Differential Voltage Amplification - dB 60 AA AA AA 135 40 90 20 45 0 0 - 20 - 40 10 k - 45 100 k 1M f - Frequency - Hz Figure 19 14 180 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 - 90 10 M m - Phase Margin 80 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE MARGIN vs FREQUENCY AA AA AA 60 180 VDD = 5 V RL = 600 CL = 600 pF TA = 25C 135 40 90 20 45 0 0 -20 m - Phase Margin AVD AVD- Large-Signal Differential Voltage Amplification - dB 80 -45 -40 10 k 100 k -90 10 M 1M f - Frequency - Hz Figure 20 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE 1000 1000 AA AA AA 100 RL = 1 M 10 AA AA AA RL = 600 1 0.1 -75 -50 -25 0 25 50 75 100 VDD = 5 V VIC = 2.5 V VO = 1 V to 4 V RL = 1 M AVD AVD- Large-Signal Differential Voltage Amplification - V/mV AVD AVD- Large-Signal Differential Voltage Amplification - V/mV VDD = 3 V VIC = 2.5 V VO = 1 V to 4 V 125 100 10 RL = 600 1 0.1 -75 -50 TA - Free-Air Temperature - C -25 0 25 50 75 100 125 TA - Free-Air Temperature - C Figure 22 Figure 21 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 15 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS OUTPUT IMPEDANCE vs FREQUENCY OUTPUT IMPEDANCE vs FREQUENCY 1000 100 AV = 100 zo O zo - Output Impedance - zo zo - Output Impedance - O VDD = 3 V TA = 25C 100 AV = 100 10 AV = 10 AV = 1 1 10 AV = 10 1 AV = 1 VDD = 5 V TA = 25C 0.1 100 1k 10 k 100 k 0.1 100 1M 1k f - Frequency - Hz Figure 23 1M COMMON-MODE REJECTION RATIO vs FREE-AIR TEMPERATURE 100 100 TA = 25C VDD = 5 V VIC = 2.5 V 80 CMRR - Common-Mode Rejection Ratio - dB CMRR - Common-Mode Rejection Ratio - dB 100 k Figure 24 COMMON-MODE REJECTION RATIO vs FREQUENCY VDD = 3 V VIC = 1.5 V 60 40 20 0 10 100 1k 10 k 100 k 1M 10 M VDD = 5 V 90 VDD = 3 V 80 70 60 - 75 - 50 - 25 0 25 Figure 25 Figure 26 POST OFFICE BOX 655303 50 75 100 TA - Free-Air Temperature - C f - Frequency - Hz 16 10 k f - Frequency - Hz * DALLAS, TEXAS 75265 125 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS SUPPLY-VOLTAGE REJECTION RATIO vs FREQUENCY SUPPLY-VOLTAGE REJECTION RATIO vs FREQUENCY 100 VDD = 3 V TA = 25C kSVR k SVR - Supply-Voltage Rejection Ratio - dB kSVR k SVR - Supply-Voltage Rejection Ratio - dB 100 80 60 kSVR+ 40 kSVR - 20 0 10 100 10 k 1k 100 k 1M VDD = 5 V TA = 25C 80 60 kSVR+ kSVR - 40 20 0 10 10 M 100 1k f - Frequency - Hz 100 k 1M 10 M f - Frequency - Hz Figure 27 Figure 28 SUPPLY CURRENT vs SUPPLY VOLTAGE SUPPLY-VOLTAGE REJECTION RATIO vs FREE-AIR TEMPERATURE 100 2.5 VDD = 2.5 V to 8 V 2 98 IIDD DD - Supply Current - mA kSVR k SVR - Supply-Voltage Rejection Ratio - dB 10 k 96 94 TA = 85C 1.5 TA = - 40C 1 0.5 92 90 - 75 TA = 25C 0 - 50 - 25 0 25 50 75 100 125 0 TA - Free-Air Temperature - C Figure 29 2 4 6 8 VDD - Supply Voltage - V 10 Figure 30 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 17 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS SLEW RATE vs LOAD CAPACITANCE SLEW RATE vs FREE-AIR TEMPERATURE 3 3 VDD = 5 V AV = - 1 TA = 25C 2.5 VDD = 5 V RL = 600 CL = 100 pF AV = 1 2.5 SR - Slew Rate - V/ s SR - Slew Rate - V/ s SR - 2 SR - SR + 1.5 1 0.5 2 1.5 SR + 1 0.5 0 10 100 1k 10 k CL - Load Capacitance - pF 0 - 75 100 k - 50 - 25 Figure 31 25 50 75 100 125 Figure 32 INVERTING LARGE-SIGNAL PULSE RESPONSE INVERTING LARGE-SIGNAL PULSE RESPONSE 3 5 VDD = 3 V RL = 2 k CL = 100 pF AV = - 1 TA = 25C VDD = 5 V RL = 2 k CL = 100 pF AV = - 1 TA = 25C 4 V VO O - Output Voltage - V VO - Output Voltage - V VO 0 TA - Free-Air Temperature - C 2 1 3 2 1 0 0 1 2 3 4 5 6 7 8 9 10 0 0 1 t - Time - s 3 4 5 6 t - Time - s Figure 33 18 2 Figure 34 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 8 9 10 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE 5 VDD = 3 V RL = 600 CL = 100 pF AV = 1 TA = 25C VDD = 5 V RL = 600 CL = 100 pF AV = 1 TA = 25C 4 VO - Output Voltage - V VO VO - Output Voltage - V VO 3 2 1 3 2 1 0 0 1 2 3 4 5 6 7 8 9 0 10 0 0.5 1 1.5 t - Time - s INVERTING SMALL-SIGNAL PULSE RESPONSE 3.5 4 4.5 5 VDD = 5 V RL = 600 CL = 100 pF AV = -1 TA = 25C 2.56 VO - Output Voltage - V VO VO - Output Voltage - V VO 1.54 3 INVERTING SMALL-SIGNAL PULSE RESPONSE 2.58 VDD = 3 V RL = 600 CL = 100 pF AV = -1 TA = 25C 1.56 2.5 Figure 36 Figure 35 1.58 2 t - Time - s 1.52 1.5 1.48 1.46 2.54 2.52 2.5 2.48 2.46 1.44 0 1 2 3 4 5 6 7 8 9 10 2.44 0 1 t - Time - s 2 3 4 5 6 7 8 9 10 t - Time - s Figure 37 Figure 38 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 19 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE 1.58 1.54 1.52 1.5 1.48 1.46 1.44 VDD = 5 V RL = 600 CL = 100 pF AV = -1 TA = 25C 2.56 VO - Output Voltage - V VO 1.56 VO - Output Voltage - V VO 2.58 VDD = 3 V RL = 600 CL = 100 pF AV = -1 TA = 25C 2.54 2.52 2.5 2.48 2.46 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 2.44 5 0 0.5 t - Time - s 200 Vn nV HzHz Vn - Equivalent Input Noise Voltage - nV/ Vn nV HzHz Vn - Equivalent Input Noise Voltage - nV/ 2.5 3 3.5 4 4.5 5 EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY VDD = 3 V RS = 20 TA = 25C 180 160 140 120 100 80 60 40 20 100 1k f - Frequency - Hz 10 k 140 VDD = 5 V RS = 20 TA = 25C 120 100 80 60 40 20 0 10 Figure 41 20 2 Figure 40 EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY 10 1.5 t - Time - s Figure 39 0 1 100 1k f - Frequency - Hz Figure 42 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 10 k TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS TOTAL HARMONIC DISTORTION PLUS NOISE vs FREQUENCY 2000 THD + N - Total Harmonic Distortion Plus Noise - % NOISE VOLTAGE OVER A 10-SECOND PERIOD VDD = 5 V f = 0.1 Hz to 10 Hz TA = 25C 1500 Noise Voltage - nV 1000 500 0 - 500 - 1000 -1500 -2000 0 1 2 3 4 5 6 7 8 9 10 10 VDD = 3 V RL = 600 TA = 25C AV = 100 1 AV = 10 0.1 AV = 1 0.01 10 10 k 100 k f - Frequency - Hz Figure 43 Figure 44 TOTAL HARMONIC DISTORTION PLUS NOISE vs FREQUENCY GAIN-BANDWIDTH PRODUCT vs FREE-AIR TEMPERATURE 10 3 VDD = 5 V RL = 600 TA = 25C Gain-Bandwidth Product - MHz THD + N - Total Harmonic Distortion Plus Noise - % 1k 100 t - Time - s AV = 100 1 AV = 10 0.1 RL = 600 CL = 100 pF f = 10 kHz 2.5 2 1.5 AV = 1 0.01 10 100 1k 10 k 100 k 1 - 50 - 25 f - Frequency - Hz 0 25 50 75 100 125 TA - Free-Air Temperature - C Figure 45 Figure 46 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 21 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS GAIN-BANDWIDTH PRODUCT vs SUPPLY VOLTAGE PHASE MARGIN vs LOAD CAPACITANCE 75 RL = 600 CL = 100 pF f = 10 kHz TA = 25C 1.9 Rnull = 100 60 om m - Phase Margin Gain-Bandwidth Product - MHz 2 1.8 1.7 45 Rnull = 50 30 Rnull = 0 1.6 Rnull = 20 15 RL = 600 TA = 25C 0 10 1.5 0 1 6 2 3 4 5 |VDD | - Supply Voltage - V 7 8 Figure 47 RL = 600 TA = 25C UNITY-GAIN BANDWIDTH vs LOAD CAPACITANCE B1 - Unity-Gain Bandwidth - kHz Gain Margin - dB Rnull = 100 Rnull = 20 10 5 0 10 2 Rnull = 50 20 15 1 AA AA Rnull = 0 10 K 100 1K CL - Load Capacitance - pF RL = 600 TA = 25C 1.5 100 K 0.5 0 10 Figure 49 22 100 k Figure 48 GAIN MARGIN vs LOAD CAPACITANCE 25 100 1k 10 k CL - Load Capacitance - pF 100 1k 10 k CL - Load Capacitance - pF Figure 50 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 100 k TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 APPLICATION INFORMATION macromodel information Macromodel information provided was derived using PSpice Parts model generation software. The Boyle macromodel (see Note 5) and subcircuit in Figure 51 were generated using the TLV244x typical electrical and operating characteristics at TA = 25C. Using this information, output simulations of the following key parameters can be generated to a tolerance of 20% (in most cases): D D D D D D D D D D D D Maximum positive output voltage swing Maximum negative output voltage swing Slew rate Quiescent power dissipation Input bias current Open-loop voltage amplification Unity gain frequency Common-mode rejection ratio Phase margin DC output resistance AC output resistance Short-circuit output current limit NOTE 5: G. R. Boyle, B. M. Cohn, D. O. Pederson, and J. E. Solomon, "Macromodeling of Integrated Circuit Operational Amplifiers," IEEE Journal of Solid-State Circuits, SC-9, 353 (1974). 99 3 VCC + 9 RSS 92 FB + 10 J1 DP VC J2 IN + 11 RD1 VAD DC 12 C1 R2 - 53 HLIM - C2 6 - - - + VLN + GCM GA VLIM 8 - RD2 54 4 91 + VLP 7 60 + - + DLP 90 RO2 VB IN - VCC - - + ISS RP 2 1 DLN EGND + - RO1 DE 5 + VE OUT .SUBCKT TLV2442 1 2 3 4 5 C1 11 12 14E-12 C2 6 7 60.00E-12 DC 5 53 DX DE 54 5 DX DLP 90 91 DX DLN 92 90 DX DP 4 3 DX EGND 99 0 POLY (2) (3,0) (4,) 0 .5 .5 FB 7 99 POLY (5) VB VC VE VLP VLN 0 + 984.9E3 -1E6 1E6 1E6 -1E6 GA 6 0 11 12 377.0E-6 GCM 0 6 10 99 134E-9 ISS 3 10 DC 216.0E-6 HLIM 90 0 VLIM 1K J1 11 2 10 JX J2 12 1 10 JX R2 6 9 100.OE3 RD1 60 11 2.653E3 RD2 60 12 2.653E3 R01 8 5 50 R02 7 99 50 RP 3 4 4.310E3 RSS 10 99 925.9E3 VAD 60 4 -.5 VB 9 0 DC 0 VC 3 53 DC .78 VE 54 4 DC .78 VLIM 7 8 DC 0 VLP 91 0 DC 1.9 VLN 0 92 DC 9.4 .MODEL DX D (IS=800.0E-18) .MODEL JX PJF (IS=1.500E-12BETA=1.316E-3 + VTO=-.270) .ENDS Figure 51. Boyle Macromodel and Subcircuit PSpice and Parts are registered trademarks of MicroSim Corporation. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 23 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 MECHANICAL DATA D (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PIN SHOWN 0.050 (1,27) 0.020 (0,51) 0.014 (0,35) 14 0.010 (0,25) M 8 0.008 (0,20) NOM 0.244 (6,20) 0.228 (5,80) 0.157 (4,00) 0.150 (3,81) Gage Plane 0.010 (0,25) 1 7 0- 8 A 0.044 (1,12) 0.016 (0,40) Seating Plane 0.069 (1,75) MAX 0.010 (0,25) 0.004 (0,10) PINS ** 0.004 (0,10) 8 14 16 A MAX 0.197 (5,00) 0.344 (8,75) 0.394 (10,00) A MIN 0.189 (4,80) 0.337 (8,55) 0.386 (9,80) DIM 4040047 / D 10/96 NOTES: A. B. C. D. 24 All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15). Falls within JEDEC MS-012 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 MECHANICAL DATA FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER 28 TERMINAL SHOWN 18 17 16 15 14 13 NO. OF TERMINALS ** 12 19 11 20 10 A B MIN MAX MIN MAX 20 0.342 (8,69) 0.358 (9,09) 0.307 (7,80) 0.358 (9,09) 28 0.442 (11,23) 0.458 (11,63) 0.406 (10,31) 0.458 (11,63) 21 9 22 8 44 0.640 (16,26) 0.660 (16,76) 0.495 (12,58) 0.560 (14,22) 23 7 52 0.739 (18,78) 0.761 (19,32) 0.495 (12,58) 0.560 (14,22) 24 6 68 25 5 0.938 (23,83) 0.962 (24,43) 0.850 (21,6) 0.858 (21,8) 84 1.141 (28,99) 1.165 (29,59) 1.047 (26,6) 1.063 (27,0) B SQ A SQ 26 27 28 1 2 3 4 0.080 (2,03) 0.064 (1,63) 0.020 (0,51) 0.010 (0,25) 0.020 (0,51) 0.010 (0,25) 0.055 (1,40) 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.045 (1,14) 0.035 (0,89) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) 4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 25 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 MECHANICAL DATA JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE PACKAGE 0.400 (10,20) 0.355 (9,00) 8 5 0.280 (7,11) 0.245 (6,22) 1 4 0.065 (1,65) 0.045 (1,14) 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.063 (1,60) 0.015 (0,38) 0.100 (2,54) 0-15 0.023 (0,58) 0.015 (0,38) 0.014 (0,36) 0.008 (0,20) 4040107/C 08/96 NOTES: A. B. C. D. E. 26 All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification on press ceramic glass frit seal only. Falls within MIL-STD-1835 GDIP1-T8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 MECHANICAL DATA PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PIN SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0- 8 0,75 0,50 A Seating Plane 0,15 0,05 1,20 MAX 0,10 PINS ** 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064 / E 08/96 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 27 TLV2442, TLV2442A, TLV2444, TLV2444A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS SLOS169H - NOVEMBER 1996 - REVISED MARCH 2001 MECHANICAL DATA U (S-GDFP-F10) CERAMIC DUAL FLATPACK 0.250 (6,35) 0.246 (6,10) 0.006 (0,15) 0.004 (0,10) 0.080 (2,03) 0.050 (1,27) 0.045 (1,14) 0.026 (0,66) 0.300 (7,62) 0.350 (8,89) 0.250 (6,35) 1 0.350 (8,89) 0.250 (6,35) 10 0.019 (0,48) 0.015 (0,38) 0.050 (1,27) 0.250 (6,35) 5 6 0.025 (0,64) 0.005 (0,13) 1.000 (25,40) 0.750 (19,05) 4040179 / B 03/95 NOTES: A. B. C. D. E. 28 All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification only. Falls within MIL STD 1835 GDFP1-F10 and JEDEC MO-092AA POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 16-Oct-2009 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty 5962-9751101Q2A ACTIVE LCCC FK 20 1 TBD 5962-9751101QHA ACTIVE CFP U 10 1 TBD 5962-9751101QPA ACTIVE CDIP JG 8 1 TBD 5962-9751102Q2A ACTIVE LCCC FK 20 1 TBD 5962-9751102QHA ACTIVE CFP U 10 1 TBD 5962-9751102QPA ACTIVE CDIP JG 8 1 TLV2442AID ACTIVE SOIC D 8 75 TLV2442AIDG4 ACTIVE SOIC D 8 75 TLV2442AIDR ACTIVE SOIC D TLV2442AIDRG4 ACTIVE SOIC TLV2442AIPW ACTIVE TLV2442AIPWG4 Lead/Ball Finish MSL Peak Temp (3) POST-PLATE N / A for Pkg Type A42 N / A for Pkg Type A42 N / A for Pkg Type POST-PLATE N / A for Pkg Type A42 N / A for Pkg Type TBD A42 N / A for Pkg Type Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2442AIPWLE OBSOLETE TSSOP PW 8 TBD Call TI TLV2442AIPWR ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2442AIPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2442AMFKB ACTIVE LCCC FK 20 1 TBD TLV2442AMJGB ACTIVE CDIP JG 8 1 TBD TLV2442AMUB ACTIVE CFP U 10 1 TLV2442AQD ACTIVE SOIC D 8 75 TLV2442AQDG4 ACTIVE SOIC D 8 Call TI POST-PLATE N / A for Pkg Type A42 N / A for Pkg Type TBD A42 N / A for Pkg Type TBD CU NIPDAU Level-1-220C-UNLIM 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TBD TLV2442AQDR ACTIVE SOIC D 8 2500 CU NIPDAU Level-1-220C-UNLIM TLV2442AQDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2442AQPW ACTIVE TSSOP PW 8 150 TBD CU NIPDAU Level-1-220C-UNLIM TLV2442AQPWG4 ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TBD CU NIPDAU Level-1-220C-UNLIM CU NIPDAU Level-1-260C-UNLIM TLV2442AQPWR ACTIVE TSSOP PW 8 2000 TLV2442AQPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) TLV2442CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2442CDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2442CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2442CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2442CPW ACTIVE TSSOP PW 8 150 CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 Green (RoHS & PACKAGE OPTION ADDENDUM www.ti.com 16-Oct-2009 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TLV2442CPWG4 ACTIVE TSSOP PW 8 TLV2442CPWLE OBSOLETE TSSOP PW 8 TLV2442CPWR ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2442CPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2442ID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2442IDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2442IDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2442IDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2442MFKB ACTIVE LCCC FK 20 1 TBD TLV2442MJGB ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type TLV2442MUB ACTIVE CFP U 10 1 TBD A42 N / A for Pkg Type Lead/Ball Finish MSL Peak Temp (3) no Sb/Br) 150 Green (RoHS & no Sb/Br) TBD CU NIPDAU Call TI Level-1-260C-UNLIM Call TI POST-PLATE N / A for Pkg Type TLV2442QD ACTIVE SOIC D 8 75 TBD CU NIPDAU Level-1-220C-UNLIM TLV2442QDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2442QDR ACTIVE SOIC D 8 2500 TBD CU NIPDAU Level-1-220C-UNLIM TLV2442QDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2442QPW ACTIVE TSSOP PW 8 150 TBD CU NIPDAU Level-1-220C-UNLIM TLV2442QPWG4 ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2442QPWR ACTIVE TSSOP PW 8 2000 TBD CU NIPDAU Level-1-220C-UNLIM TLV2442QPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444AID ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444AIDG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444AIPW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444AIPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444AIPWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444AIPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444CD ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444CDG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444CDR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) Call TI Level-1-260C-UNLIM TLV2444CDRG4 ACTIVE SOIC D 14 2500 Green (RoHS & Call TI Level-1-260C-UNLIM Addendum-Page 2 PACKAGE OPTION ADDENDUM www.ti.com 16-Oct-2009 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TLV2444CPW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444CPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444CPWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444CPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444ID ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444IDG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444IDR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444IDRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444IPWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV2444IPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) no Sb/Br) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 3 PACKAGE OPTION ADDENDUM www.ti.com 16-Oct-2009 OTHER QUALIFIED VERSIONS OF TLV2442, TLV2442A, TLV2442AM, TLV2442M, TLV2444A : * Automotive: TLV2442-Q1, TLV2442A-Q1, TLV2444A-Q1 NOTE: Qualified Version Definitions: * Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Addendum-Page 4 PACKAGE MATERIALS INFORMATION www.ti.com 11-Mar-2008 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel Diameter Width (mm) W1 (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TLV2442AIDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLV2442AIPWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1 TLV2442CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLV2442CPWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1 TLV2442IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLV2444AIPWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1 TLV2444CDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 TLV2444CPWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1 TLV2444IDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 TLV2444IPWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 11-Mar-2008 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLV2442AIDR SOIC D 8 2500 346.0 346.0 29.0 TLV2442AIPWR TSSOP PW 8 2000 346.0 346.0 29.0 TLV2442CDR SOIC D 8 2500 346.0 346.0 29.0 TLV2442CPWR TSSOP PW 8 2000 346.0 346.0 29.0 TLV2442IDR SOIC D 8 2500 346.0 346.0 29.0 TLV2444AIPWR TSSOP PW 14 2000 346.0 346.0 29.0 TLV2444CDR SOIC D 14 2500 346.0 346.0 33.0 TLV2444CPWR TSSOP PW 14 2000 346.0 346.0 29.0 TLV2444IDR SOIC D 14 2500 346.0 346.0 33.0 TLV2444IPWR TSSOP PW 14 2000 346.0 346.0 29.0 Pack Materials-Page 2 MECHANICAL DATA MLCC006B - OCTOBER 1996 FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER 28 TERMINAL SHOWN 18 17 16 15 14 13 NO. OF TERMINALS ** 12 19 11 20 10 A B MIN MAX MIN MAX 20 0.342 (8,69) 0.358 (9,09) 0.307 (7,80) 0.358 (9,09) 28 0.442 (11,23) 0.458 (11,63) 0.406 (10,31) 0.458 (11,63) 21 9 22 8 44 0.640 (16,26) 0.660 (16,76) 0.495 (12,58) 0.560 (14,22) 23 7 52 0.739 (18,78) 0.761 (19,32) 0.495 (12,58) 0.560 (14,22) 24 6 68 0.938 (23,83) 0.962 (24,43) 0.850 (21,6) 0.858 (21,8) 84 1.141 (28,99) 1.165 (29,59) 1.047 (26,6) 1.063 (27,0) B SQ A SQ 25 5 26 27 28 1 2 3 4 0.080 (2,03) 0.064 (1,63) 0.020 (0,51) 0.010 (0,25) 0.020 (0,51) 0.010 (0,25) 0.055 (1,40) 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.045 (1,14) 0.035 (0,89) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) 4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MTSS001C - JANUARY 1995 - REVISED FEBRUARY 1999 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PINS SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0- 8 A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MCER001A - JANUARY 1995 - REVISED JANUARY 1997 JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE 0.400 (10,16) 0.355 (9,00) 8 5 0.280 (7,11) 0.245 (6,22) 1 0.063 (1,60) 0.015 (0,38) 4 0.065 (1,65) 0.045 (1,14) 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.023 (0,58) 0.015 (0,38) 0-15 0.100 (2,54) 0.014 (0,36) 0.008 (0,20) 4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP1-T8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DLP(R) Products DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID RF/IF and ZigBee(R) Solutions amplifier.ti.com dataconverter.ti.com www.dlp.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lprf Applications Audio Automotive Broadband Digital Control Medical Military Optical Networking Security Telephony Video & Imaging Wireless www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/medical www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2009, Texas Instruments Incorporated