Carling Technologies LS-Series Rocker Switches TM Dielectric Strength 1000V - live to dead metal parts Electrical Life 50,000 cycles- maintained 25,000 cycles- momentary Mechanical Life 100,000 cycles Operating Temperature 0F to 150F (-17.8C to +65.6C) LS-Series Rocker Switches The LS-Series Softspot illuminated rocker switches feature a three-color high brightness light sequence, from a single lamp. These switches are designed with a standard nylon snap-in bracket and "Drip-Dry" construction that protects the front panel from dust and moisture, and are ideal for Marine and Transportation industry applications. .075[1.91] DIA .125[3.18] DIA .330[8.38] .055[1.40] DIA .437[11.09] .394[10.00] .250[6.35] .187[4.74] 1.700[43.18] 1.190[30.22] .187[4.74] .680[17.27] SOLDER LUG .250 TAB (Q.C.) .187 TAB (Q.C.) .960[24.38] .830[21.08] TERMINAL TYPE 55 4 plcs* .150[3.81] DIA 1.084[27.53] #6-32NC-2 THREAD 1.450[36.83] .372[9.45] 6.000[152.40] .370[9.39] MOUNTING HOLE (Nylon Snap-in Brackets) Panel Thickness: .040 min. - .250 max. Switch should be mounted at 90 for maximum water shedding (45 to 90 acceptable) .187[4.75] .141[3.58] .500[12.70] .187[4.75] .350[8.89] .286[7.26] SCREW (ASSEMBLED) WIRE LEAD PRINTED CIRCUIT .422[10.72] * Angled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. LS1511 - 13 - BL - BL - 012 1 Base Part Number 2 Lighting Sequence 1 BASE PART NUMBER: SERIES/POLES/ILLUMINATION/ CIRCUITRY2/RATING/TERMINATION3 10A 250VAC, 15A 125VAC, 3/4 HP 125-250VAC, 15A 15-28VDC Single Pole solder lug .250 tab screw term. wire leads ON-NONE-OFF LS1510 LS1511 LS1514 LS1515 ON-NONE-(OFF) LS1520 LS1521 LS1524 LS1525 (ON)-NONE-OFF LS1530 LS1531 LS1534 LS1535 ON-NONE-ON LS1540 LS1541 LS1544 LS1545 ON-NONE-(ON) LS1550 LS1551 LS1554 LS1555 ON-OFF-ON LS1560 LS1561 LS1564 LS1565 ON--OFF-(ON) LS1570 LS1571 LS1574 LS1575 (ON)-OFF-(ON) LS1580 LS1581 LS1584 LS1585 NOTES 1 Independent lamp is standard. Dependent lamp with ON-OFF function (including momentary) is available with Lighting Sequences 10, 20, 30, 40 and 50. (No light in OFF position.) 2 Green and blue not recommended with 125 volt or 250 volt neon lamps. 3 Additional terminations available. Consult factory. 4 Custom colors available. Consult factory. () Indicates momentary function. 3 Actuator Color 4 Base Color 2 LIGHTING SEQUENCE1,2 position 1 position 2 01 red red 02 amber amber 03 green green 10 red --11 red clear 12 red clear 13 red clear 14 red clear 15 red clear 20 amber --21 amber clear 22 amber clear 23 amber clear 24 amber clear 25 amber clear 30 green --31 green clear 32 green clear 33 green clear 34 green clear 35 green clear 40 blue --41 blue clear 42 blue clear 43 blue clear 44 blue clear 45 blue clear 50 clear --51 clear clear 52 clear clear 53 clear clear 54 clear clear 55 clear clear www.carlingtech.com 5 Lamp Voltage position 3 red amber green none red amber green blue clear none red amber green blue clear none red amber green blue clear none red amber green blue clear none red amber green blue clear 3 ACTUATOR COLOR4 BL black WH white 4 BASE COLOR4 BL black WH white 5 LAMP VOLTAGE2 neon 125 125 volts neon 250 250 volts incandescent 006 6 volts 012 12 volts 018 18 volts 024 24 volts 23