TPSMC6.8 thru TPSMC47A Vishay Semiconductors Surface Mount Automotive Transient Voltage Suppressors High Temperature Stability & High Reliability Conditions * ted n e Pat Major Ratings and Characteristics V(BR) 6.8 V to 47 V PPPM 1500 W IFSM 200 A Tj max. 185 C * Patent #'s 4,980,315 5,166,769 5,278,094 Features DO-214AB (SMC) Typical Applications PAR(R) * Patented construction * Available in Unidirectional polarity only * 1500 W peak pulse power capability with a 10/1000 s waveform * Excellent clamping capability * Very fast response time * Low incremental surge resistance * Typical ID less than 1.0 A above 15 V rating * Meets MSL level 1, per J-STD-020C * Solder Dip 260 C, 40 seconds Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and Telecommunication Mechanical Data Case: DO-214AB (SMC) Epoxy meets UL-94V-0 Flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: Color band denotes cathode end Maximum Ratings (TA = 25 C, unless otherwise noted) Parameter Peak pulse power dissipation with a 10/1000 s Symbol Value Unit PPPM Minimum 1500 W IPPM See Next Table A IFSM 200 A VF 3.5 V TJ, TSTG - 65 to + 185 C waveform(1)(2) (Fig. 3) Peak power pulse current with a 10/1000 s waveform(1) (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave Maximum instantaneous forward voltage at 100 A (2) (2) Operating junction and storage temperature range Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 C per Fig. 2 (2) Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum Document Number 88407 15-Aug-05 www.vishay.com 1 TPSMC6.8 thru TPSMC47A Vishay Semiconductors Electrical Characteristics (TA = 25 C unless otherwise noted) Breakdown Voltage Device Type TPSMC6.8 TPSMC6.8A TPSMC7.5 TPSMC7.5A TPSMC8.2 TPSMC8.2A TPSMC9.1 TPSMC9.1A TPSMC10 TPSMC10A TPSMC11 TPSMC11A TPSMC12 TPSMC12A TPSMC13 TPSMC13A TPSMC15 TPSMC15A TPSMC16 TPSMC16A TPSMC18 TPSMC18A TPSMC20 TPSMC20A TPSMC22 TPSMC22A TPSMC24 TPSMC24A TPSMC27 TPSMC27A TPSMC30 TPSMC30A TPSMC33 TPSMC33A TPSMC36 TPSMC36A TPSMC39 TPMSC39A TPSMC43 TPSMC43A TPSMC47 TPSMC47A Device Marking Code DDP DEP DFP DGP DHP DKP DLP DMP DNP DPP DQP DRP DSP DTP DUP DVP DWP DXP DYP DZP EDP EEP EFP EGP EHP EKP ELP EMP ENP EPP EQP ERP ESP ETP EUP EVP EWP EXP EYP EZP FDP FEP V(BR)(1) at IT (V) Min 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 Max 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 Test Current IT (mA) Stand-off Voltage VWM (V) Maximum Reverse Leakage at VWM IR (A) 10.0 10.0 10.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 1000 1000 500 500 200 200 50 50 20 20 5.0 5.0 2.0 2.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 TJ = 150 C Maximum Reverse Leakage at VWM ID (A) Maximum. Peak Pulse Surge Current IPPM(2) (A) Maximum Clamping Voltage at IPPM VC (V) 10000 10000 5000 5000 2000 2000 500 500 200 200 50 50 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 20 20 139.0 143.0 128.0 133.0 120.0 124.0 109.0 112.0 100.0 103.0 92.6 96.2 86.7 89.8 78.9 82.4 68.2 70.8 63.8 66.7 56.6 59.5 51.5 54.2 47.0 49.0 43.2 45.2 38.4 40.0 34.5 36.2 31.4 32.8 28.8 30.1 26.6 27.8 24.2 25.3 22.1 23.1 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 Notes: (1) V(BR) measured after IT applied for 300 s, IT = square wave pulse or equivalent (2) Surge current waveform per Fig. 3 and derated per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 www.vishay.com 2 Document Number 88407 15-Aug-05 TPSMC6.8 thru TPSMC47A Vishay Semiconductors Ratings and Characteristics Curves (TA = 25 C unless otherwise specified) 20000 Non-repetitive Pulse Waveform shown in Fig. 3 TA = 25 C CJ - Junction Capacitance (pF) PPPM - Peak Pulse Power (kW) 100 10 1 0.1 TJ = 25 C f = 1.0 MHz Vsig = 50mVp-p 10000 Measured at Zero Bias 1000 Measured at Stand-Off Voltage, VWM 100 0.1 s 1.0 s 10 s 100 s 1.0 ms 1.0 10 ms td - Pulse Width (sec.) 100 200 Figure 4. Typical Junction Capacitance 100 200 IFSM - Peak Forward Surge Current (A) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % Figure 1. Peak Pulse Power Rating Curve 75 50 25 0 10 V(BR) - Breakdown Voltage (V) 0 25 50 75 100 125 150 175 200 TJ = TJ max. 8.3 ms Single Half Sine-Wave 100 50 10 1 TJ - Initial Temperature (C) 5 10 50 100 Number of Cycles at 60 Hz Figure 2. Pulse Power or Current versus Initial Junction Temperature Figure 5. Maximum Non-Repetitive/Peak Forward Surge Current IPPM - Peak Pulse Current, % IRSM 150 TJ = 25 C Pulse Width (td) is defined as the point where the peak current decays to 50 % of IPPM tr = 10 sec. Peak Value IPPM 100 Half Value -- IPP 2 IPPM 50 10/1000 sec. Waveform as defined by R.E.A. td 0 0 1.0 2.0 3.0 4.0 t - Time (ms) Figure 3. Pulse Waveform Document Number 88407 15-Aug-05 www.vishay.com 3 TPSMC6.8 thru TPSMC47A Vishay Semiconductors Package outline dimensions in inches (millimeters) DO-214AB (SMC) Mounting Pad Layout Cathode Band 0.185 MAX. (4.69 MAX.) 0.126 (3.20) 0.246 (6.22) 0.220 (5.59) 0.114 (2.90) 0.280 (7.11) 0.126 MIN. (3.20 MIN.) 0.060 MIN. (1.52 MIN.) 0.260 (6.60) 0.012 (0.305) 0.006 (0.152) 0.320 REF 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) 0.008 (0.2) 0 (0) 0.030 (0.76) 0.320 (8.13) 0.305 (7.75) www.vishay.com 4 Document Number 88407 15-Aug-05