CTS COMMUNICATIONS COMPONENTS Features: * Frequency Range: 1.8 - 48 MHz * Thru Hole or Surface Mount * Standard Frequencies Stocked by CTS Distributors * Rugged Resistance Weld Seal * Low Cost: AT-Cut Resonators * Non-Standard Frequencies or Tolerances also Available, Consult Factory The MP Series are the right choice for Microprocessor, controller, or other standard crystal applications. These hermetic packages use Resistance Weld sealing for improved aging and reliability. Surface mount lead forming is available as well as insulating sleeve, top wire, bent leads, or tape.reel packaging. Electrical Specifications: Parameter Specification Frequency Range Calibration Tolerance Temperature Stability Operating Temperature Range Operating Mode Drive Level Shunt Capacitance Aging 1.8 - 48 MHz )0.005% ()50 ppm) at +25*C )0.005% ()50 pp,) of +25*C reading -20*C to +70*C Fundamental (or 3rd O.T. as applicable) 100 Microwatts 7 pF, Max <10 ppm/Yr Example Part Numbers: PART NUMBER MP018S MP020S MP024S MP036S MP037 MP040 MP04A MP041 MP042 MP05A MP05B MP050 FREQUENCY (MHz) 1.843200 2.000000 2.457600 3.579545 3.688400 4.000000 4.000000 4.194304 4.915200 5.000000 5.000000 5.068800 LOAD/ SERIES 13pF 20pF 32pF 18pF 20pF 20pF SERIES 12pF 20pF 20pF SERIES SERIES PART NUMBER MP060 MP061 MP073 MP080 MP080A MP098 MP100 MP101 MP107 MP110 MP111 MP120 FREQUENCY (MHz) 6.000000 6.144000 7.372800 8.000000 8.000000 9.830400 10.000000 10.000000 10.738635 11.000000 11.059200 12.000000 LOAD/ SERIES 20pF 20pF SERIES SERIES 20pF 20Pf SERIES 30pF 32pF 18pF SERIES SERIES PART NUMBER MP122 MP142 MP147 MP150 MP160 MP184 MP196 MP200 MP221 MP240 MP245 MP250 FREQUENCY (MHz) 12.288800 14.318180 14.745600 15.000000 16.000000 18.432000 19.660800 20.000000 22.118400 24.000000 24.576000 25.000000 LOAD/ SERIES 32pF SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES 171 Covington Dr. * Bloomingdale, IL 60108-3107 Phone 800-757-6686 * Fax 630-295-6608 * E-Mail: www.ctscorp.com CRYSTALS MP Series Crystals CRYSTALS CTS MP Series Crystals COMMUNICATIONS COMPONENTS .435 MAX [11.05 mm] "INS" "SM" With Insulator Surface Mount .435 MAX [11.05 mm] .530 MAX [13.46 mm] .096 [2.44 mm] .530 MAX [13.46 mm] .500 MIN [12.70 mm] .530 MAX [13.46 mm] .017 [.43 mm] .183 MAX [4.65 mm] .192 [4.88 mm] .192 [4.88 mm] .183 MAX [4.65 mm] .069 [1.75 mm] .735 [18.67 mm] .017 [.43 mm] .500 MIN [12.70 mm] .017 [.43 mm] .192 [4.88 mm] .068 [1.73 mm] .055 [1.40 mm] .183 MAX [4.65 mm] .435 MAX [11.05 mm] Mechanical/Environmental Specifications Package Type: Leak Test Metal cover; hermetic seal base resistance weld seal Storage Temperature: <2x10-8cc-atm/sec Insulation Resistance: -40 to +85C 500 Mohm min @ 100V Solderability: 63Sn/37Pb solder, 5 sec. @ 245 C using RMA flux; 95% coverage, minimum Ordering Information MP____ ____ ____ _*__ _**_ The first three digits come from "MP-Crystals --Example Part Numbers * This space is optional and may be an "A", "B", or "S" from the same Example Part Numbers ** This space is optional and may define: "TW" = Hold down Top Wire "SLV" = Insulating Sleeve "SM" = Surface Mount lead form "INS" = Insulating Spacer "1" = Tape and Reel loading for Surface Mount "2" = (Axial) Tape and Reel for Through Hole Custom frequencies specified upon request. Contact CTS for more information 171 Covington Dr. * Bloomingdale, IL 60108-3107 Phone 800-757-6686 * Fax 630-295-6608 * E-Mail: www.ctscorp.com