CPC1035N Single-Pole, Normally Open 4-Lead SOP OptoMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Rating 350 100 35 Units VP mArms / mADC Features * 1500Vrms Input/Output Isolation * Small 4-Pin SOP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Tape & Reel Version Available Description The CPC1035N is a miniature single-pole, normally open (1-Form-A) solid state relay in a 4-pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input to output isolation. The efficient MOSFET switches and photovoltaic die use IXYS Integrated Circuits Division's patented OptoMOS architecture while the optically coupled output is controlled by a highly efficient GaAlAs infrared LED. IXYS Integrated Circuits Division's state of the art double-molded vertical construction packaging makes the CPC1035N one of the world's smallest relays. It offers board space savings of at least 20% over the competitor's larger 4-pin SOP relay. Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Ordering Information Part # CPC1035N CPC1035NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) * For other packaging options consult factory. Pin Configuration + Control - Control 1 4 3 2 Load Load Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton Pb DS-CPC1035N-R14 toff e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION CPC1035N Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 350 5 50 1 70 400 1500 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms C C Derate linearly 3.33 mW / C Electrical Characteristics @ 25C Parameter Output Characteristics Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate 3 Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Input to Output Characteristics Capacitance, Input to Output 1 2 3 2 Conditions Symbol Min Typ Max Units t=10ms IL=100mA VL=350VP IL ILPK RON ILEAK - 30 - 100 350 35 1 mArms / mADC mAP A VL=50V, f=1MHz ton toff COUT - 25 2 1 - IL=100mA IF=5mA VR=5V IF IF VF IR 0.3 0.9 - 0.8 0.7 1.2 - 2 1.4 10 mA mA V A - - - 1 - pF IF=5mA, VL=10V ms pF Load current derates linearly from 100mA @ 25oC to 70mA @85oC. Measurement taken within 1 second of on-time. For applications requiring high temperature operation (greater than 60oC) a LED drive current of 4mA is recommended. www.ixysic.com R14 INTEGRATED CIRCUITS DIVISION CPC1035N PERFORMANCE DATA* Typical Turn-On Time (IF=5mA, IL=100mA, TA=25C) 25 15 10 5 0.60 0.70 0.80 0.90 Turn-On (ms) 1.00 10 5 Device Count (N) 15 10 5 Typical IF for Switch Dropout (IL=100mA, TA=25C) Typical Blocking Voltage Distribution (TA=25C) 0.24 0.25 0.26 26 0.27 0.65 0.70 0.75 0.80 LED Current (mA) 15 10 5 30 Turn-On (ms) 25 20 15 10 5 0 1.17 I F = 50mA I F = 30mA I F = 20mA I F = 10mA I F = 5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 Temperature (C) 100 120 Turn-On (ms) 1.4 20 15 10 0.65 0.70 0.75 0.80 LED Current (mA) 377.5 388.5 399.5 410.5 421.5 432.5 443.5 Blocking Voltage (VP) 0.85 Typical Turn-Off vs. LED Forward Current (IL=100mA) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 0 50 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 I F = 5mA I F = 10mA -40 -20 0 20 40 60 Temperature (C) 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) Typical Turn-On vs. Temperature (IL=50mA) Typical LED Forward Voltage Drop vs. Temperature 1.6 0.60 Typical Turn-On vs. LED Forward Current (IL=100mA) 0 1.8 25 0 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 32 5 0.55 35 31 30 20 0.85 Typical LED Forward Voltage Drop (IF=5mA, TA=25C) 27 35 Turn-Off (ms) 0.60 10 28 29 30 On-Resistance (:) 0.23 0 0.55 15 Turn-Off (ms) 0.22 Turn-Off (ms) 0 20 0 0.21 25 20 25 5 1.10 Typical IF for Switch Operation (IL=100mA, TA=25C) 25 Device Count (N) 15 Device Count (N) 0.50 Device Count (N) 30 20 0 0 LED Forward Voltage Drop (V) 35 Device Count (N) 20 Device Count (N) Device Count (N) 25 Typical On-Resistance Distribution (IF=2mA, IL=100mA, TA=25C) Typical Turn-Off Time (IF=5mA, IL=100mA, TA=25C) 80 100 Typical Turn-Off vs. Temperature (IL=50mA) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 I F = 10mA I F = 5mA -40 -20 0 20 40 60 80 100 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R14 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION CPC1035N PERFORMANCE DATA* Typical IF for Switch Operation vs. Temperature (IL=50mA) 3.0 3.0 1.5 1.0 2.0 1.5 1.0 0.5 0.5 0 0 -20 0 20 40 60 Temperature (C) 80 100 0 20 40 60 80 -50 -100 -2 -1 0 1 2 3 140 120 100 I F =10mA 80 60 I F =5mA 40 -20 0 20 40 100 80 100 420 415 410 405 400 60 80 100 120 -40 -20 0 0.012 0.010 0.008 0.006 0.004 0.002 20 40 60 Temperature (C) 80 20 40 60 Temperature (C) Energy Rating Curve Load Current (A) Leakage (A) 80 395 -40 Typical Leakage vs. Temperature Measured Across Pins 3&4 (VL=350V) 0 60 425 Temperature (C) -20 40 430 0.014 0 -40 20 Typical Blocking Voltage vs. Temperature Load Voltage (V) 0.016 0 Typical Load Current vs. Temperature 0 -3 -20 Temperature (C) 20 -150 10 -40 Blocking Voltage (VP) 0 20 Temperature (C) 180 Load Current (mA) 50 30 100 160 100 40 0 -20 -40 Typical Load Current vs. Load Voltage (IF=5mA, TA=25C) Typical On-Resistance vs. Temperature (IF=10mA, IL=50mA) 50 On-Resistance (:) LED Current (mA) LED Current (mA) 2.0 -40 Load Current (mA) 60 2.5 2.5 150 Typical IF for Switch Dropout vs. Temperature (IL=50mA) 100 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R14 INTEGRATED CIRCUITS DIVISION CPC1035N Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating CPC1035N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time CPC1035N 260C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R14 e3 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION CPC1035N MECHANICAL DIMENSIONS CPC1035N 4.089 0.203 (0.161 0.008) Recommended PCB Land Pattern 0.200 0.025 (0.008 0.001) 0.60 (0.0217) 6.096 0.102 (0.240 0.004) 3.810 0.076 (0.150 0.003) 0.432 0.127 (0.017 0.005) 5.60 (0.2205) 1.02 0.025 (0.040 0.001) Pin 1 2.54 Typ (0.100 Typ) 1.30 (0.0512) 2.184 Max (0.086 Max) 2.54 (0.10) Lead to package standoff: 0.0637 0.0383 (0.0025 0.0015) 0.762 0.102 (0.030 0.004) 0.381 TYP. (0.015 TYP.) CPC1035N device weight = 0.075 grams Dimensions mm (inches) CPC1035NTR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 (0.472) B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches) Embossed Carrier Embossment NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-CPC1035N-R14 (c)Copyright 2013, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 5/6/2013