STP6NK90Z - STP6NK90ZFP STB6NK90Z N-CHANNEL 900V - 1.75 - 5.8A TO-220/TO-220FP/D2PAK Zener-Protected SuperMESHTMPower MOSFET TYPE STP6NK90Z STP6NK90ZFP STB6NK90Z VDSS RDS(on) ID Pw 900 V 900 V 900 V <2 <2 <2 5.8 A 5.8 A 5.8 A 140 W 30 W 140 W TYPICAL RDS(on) = 1.75 EXTREMELY HIGH dv/dt CAPABILITY 100% AVALANCHE TESTED GATE CHARGE MINIMIZED VERY LOW INTRINSIC CAPACITANCES VERY GOOD MANUFACTURING REPEATIBILITY 3 1 TO-220 2 TO-220FP 3 1 D2PAK DESCRIPTION The SuperMESHTM series is obtained through an extreme optimization of ST's well established stripbased PowerMESHTM layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications. Such series complements ST full range of high voltage MOSFETs including revolutionary MDmeshTM products. INTERNAL SCHEMATIC DIAGRAM APPLICATIONS HIGH CURRENT, HIGH SPEED SWITCHING IDEAL FOR OFF-LINE POWER SUPPLIES, ADAPTORS AND PFC LIGHTING ORDERING INFORMATION SALES TYPE MARKING PACKAGE PACKAGING STP6NK90Z P6NK90Z TO-220 TUBE STP6NK90ZFP P6NK90ZFP TO-220FP TUBE STB6NK90ZT4 B6NK90Z D2PAK TAPE & REEL November 2002 1/12 STP6NK90Z - STP6NK90ZFP - STB6NK90Z ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit STP6NK90Z / STB6NK90Z VDS VDGR VGS STP6NK90ZFP Drain-source Voltage (VGS = 0) 900 V Drain-gate Voltage (RGS = 20 k) 900 V Gate- source Voltage 30 V ID Drain Current (continuous) at TC = 25C 5.8 5.8 (*) A ID Drain Current (continuous) at TC = 100C 3.65 3.65 (*) A Drain Current (pulsed) 23.2 23.2 (*) A Total Dissipation at TC = 25C 140 30 W Derating Factor 1.12 0.24 W/C IDM () PTOT VESD(G-S) dv/dt (1) Gate source ESD(HBM-C=100pF, R=1.5K) 4000 V 4.5 V/ns Peak Diode Recovery voltage slope Viso Insulation Withstand Voltage (DC) Tj Tstg Operating Junction Temperature Storage Temperature -- 2500 V -55 to 150 C ( ) Pulse width limited by safe operating area (1) ISD 5.8A, di/dt 200A/s, VDD V(BR)DSS, Tj TJMAX. (*) Limited only by maximum temperature allowed THERMAL DATA D2PAK TO-220 Rthj-case Rthj-pcb Thermal Resistance Junction-case Max TO-220FP Unit 4.2 C/W 0.89 Thermal Resistance Junction-pcb Max (When 60 C/W mounted on minimum Footprint) Rthj-amb Thermal Resistance Junction-ambient Max 62.5 C/W Tl Maximum Lead Temperature For Soldering Purpose 300 C AVALANCHE CHARACTERISTICS Symbol Parameter Max Value Unit IAR Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by Tj max) 5.8 A EAS Single Pulse Avalanche Energy (starting Tj = 25 C, ID = IAR, VDD = 50 V) 300 mJ GATE-SOURCE ZENER DIODE Symbol BVGSO Parameter Gate-Source Breakdown Voltage Test Conditions Igs= 1mA (Open Drain) Min. 30 Typ. Max. Unit V PROTECTION FEATURES OF GATE-TO-SOURCE ZENER DIODES The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device's ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device's integrity. These integrated Zener diodes thus avoid the usage of external components. 2/12 STP6NK90Z - STP6NK90ZFP - STB6NK90Z ELECTRICAL CHARACTERISTICS (TCASE =25C UNLESS OTHERWISE SPECIFIED) ON/OFF Symbol Parameter Test Conditions Min. Typ. Max. Drain-source Breakdown Voltage ID = 1mA, VGS = 0 IDSS Zero Gate Voltage Drain Current (VGS = 0) VDS = Max Rating VDS = Max Rating, TC = 125 C 1 50 A A IGSS Gate-body Leakage Current (VDS = 0) VGS = 20V 10 A VGS(th) Gate Threshold Voltage VDS = VGS, ID = 100A RDS(on) Static Drain-source On Resistance VGS = 10V, ID = 2.9 A V(BR)DSS 900 Unit 3 V 3.75 4.5 V 1.75 2 Typ. Max. Unit DYNAMIC Symbol gfs (1) Ciss Coss Crss Coss eq. (3) Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Equivalent Output Capacitance Test Conditions Min. VDS =15V, ID = 2.9 A VDS = 25V, f = 1 MHz, VGS = 0 VGS = 0V, VDS = 0V to 720V 5 S 1350 130 26 pF pF pF 70 pF SWITCHING ON Symbol Parameter Test Conditions td(on) tr Turn-on Delay Time Rise Time VDD = 450 V, ID = 3 A RG = 4.7 ,VGS = 10 V (Resistive Load see, Figure 3) Qg Qgs Qgd Total Gate Charge Gate-Source Charge Gate-Drain Charge VDD = 720 V, ID = 5.8 A, VGS = 10V Min. Typ. Max. Unit 17 20 ns ns 46.5 8.5 25 nC nC nC SWITCHING OFF Symbol Parameter Test Conditions Min. Typ. Max. Unit td(off) tf Turn-off Delay Time Fall Time VDD = 450 V, ID = 3 A RG = 4.7 , VGS = 10 V (Resistive Load see, Figure 3) 45 20 ns ns tr(Voff) tf tc Off-voltage Rise Time Fall Time Cross-over Time VDD = 720V, ID = 5.8 A, RG = 4.7 , VGS = 10V (Inductive Load see, Figure 5) 11 12 20 ns ns ns SOURCE DRAIN DIODE Symbol Parameter Test Conditions ISD ISDM (2) Source-drain Current Source-drain Current (pulsed) VSD (1) Forward On Voltage ISD = 5.8 A, VGS = 0 Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 5.8 A, di/dt = 100A/s VDD = 36V, Tj = 150C (see test circuit, Figure 5) trr Qrr IRRM Min. Typ. 840 5880 14 Max. Unit 5.8 23.2 A A 1.6 V ns nC A Note: 1. Pulsed: Pulse duration = 300 s, duty cycle 1.5 %. 2. Pulse width limited by safe operating area. 3. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS. 3/12 STP6NK90Z - STP6NK90ZFP - STB6NK90Z Safe Operating Area For TO-220/D2PAK Safe Operating Area For TO-220FP Thermal Impedance For TO-220/D2PAK Thermal Impedance For TO-220FP Output Characteristics Transfer Characteristics 4/12 STP6NK90Z - STP6NK90ZFP - STB6NK90Z Transconductance Static Drain-source On Resistance Gate Charge vs Gate-source Voltage Capacitance Variations Normalized Gate Threshold Voltage vs Temp. Normalized On Resistance vs Temperature 5/12 STP6NK90Z - STP6NK90ZFP - STB6NK90Z Source-drain Diode Forward Characteristics Maximum Avalanche Energy vs Temperature 6/12 Normalized BVDSS vs Temperature STP6NK90Z - STP6NK90ZFP - STB6NK90Z Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform Fig. 3: Switching Times Test Circuit For Resistive Load Fig. 4: Gate Charge test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times 7/12 STP6NK90Z - STP6NK90ZFP - STB6NK90Z TO-220 MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 D1 0.107 1.27 0.050 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.067 F2 1.14 1.70 0.044 0.067 G 4.95 5.15 0.194 0.203 G1 2.4 2.7 0.094 0.106 H2 10.0 10.40 0.393 0.409 L2 16.4 0.645 13.0 14.0 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.2 6.6 0.244 0.260 L9 3.5 3.93 0.137 0.154 DIA. 3.75 3.85 0.147 0.151 D1 C D A E L4 H2 G G1 F1 L2 F2 F Dia. L5 L9 L7 L6 8/12 L4 P011C STP6NK90Z - STP6NK90ZFP - STB6NK90Z TO-220FP MECHANICAL DATA mm. DIM. MIN. A 4.4 inch TYP MAX. MIN. TYP. MAX. 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.5 0.045 0.067 F2 1.15 1.5 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 L7 9 9.3 0.354 0.366 O 3 3.2 0.118 0.126 B D A E L3 L3 L6 F2 H G G1 F F1 L7 L2 L5 1 2 3 L4 9/12 STP6NK90Z - STP6NK90ZFP - STB6NK90Z D2PAK MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 D1 E 8 0.315 10 E1 10.4 0.393 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 0.126 R 0.015 0 4 3 V2 0.4 10/12 1 STP6NK90Z - STP6NK90ZFP - STB6NK90Z 2 D PAK FOOTPRINT TUBE SHIPMENT (no suffix)* TAPE AND REEL SHIPMENT (suffix "T4")* REEL MECHANICAL DATA DIM. mm MIN. A DIM. mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 MAX. MIN. 330 B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA inch MAX. 12.992 0.059 13.2 0.504 0.520 26.4 0.960 1.039 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 MAX. F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.075 0.082 0.933 0.956 * on sales type 11/12 STP6NK90Z - STP6NK90ZFP - STB6NK90Z Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. (c) http://www.st.com 12/12