Sealed Snap-Acting Pushbutton Switch
107-3001-EVX
Ref. #: MS-100849
Last Update: 11-27-06
www.mouser.com 1-800-346-6873
Dimensions: mm (In.)
Available from Mouser Electronics
Electrical Specifications:
•Rating: 1A/250VAC, 3A/120VAC or 28VDC
•Contact Resistance: 20mΩmax. initial @ 2-4VDC 100mA
•Insulation Resistance: 1,000MΩmin.
•Dielectric Strength: 1,500 V RMS@ sea level
(.50)
12.70
(.219)
5.56
1/4 - 40 UNS-2A
With standard locking ring. Without locking ring.
Epoxy Seal
(ø.116)
ø2.95
(.24)
6.10 (ø.25)
ø6.35
(ø.25)
ø6.35
(ø.094)
ø2.38
(.033)
.85
(.022)
.55
(.156)
3.96
(.080)
2.03
P.C. MOUNTING
PANEL MOUNTING
(.156)
3.96
(.047)
1.19
(.08)
2.03
(.078)
1.98
(.185)
4.70
(.03)
.76
3
2
1
(.409)
10.40
(.03)
.76
(.28)
7.11
(.346)
8.80
(.26)
6.60
SWITCH FUNCTION
ON MOM
2 NO
1 Comm.
3 NC
2 NO
1 Comm.
3 NC
POS. 1 POS. 2
1-3 1-2
Materials:
•Case and Bushing: Glass filled Nylon 6/6, flame retardant, heat stabilized (94v-0)
•Plunger: Glass filled Nylon
•Switch Support: Brass or Steel, tin plate
•Switch Support Retainer: Stainless Steel
•N.O. & N.C. Contacts: Brass, with gold plate over nickel plate
•Common Contacts & all Terminals: Copper alloy, with gold plate over nickel plate.
•Terminal Seal: Epoxy
Mechanical Specifications:
•Mechanical Life: 50,000 make-and-break cycles.
•Operating Temperature: -30˚C to 75˚C
•Cap Installation Force: 10 lbs. max. Permissible.
Note:
•RoHS Compliant by Exemption
Specifications are subject to change without notice. No liability or warranty implied by this information. Environmental compliance based on producer documentation.
