JHS-142-PIN - M/A-COM Technology Solutions

Surface Mount Quadrature Hybrid,

200 - 400 MHz

Rev. V3

JHS-142

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Features

 Fully Hermetic

 Octave Bandwidth

 Low VSWR: 1.1:1 Typical

 Impedance: 50 Ohms Nominal

 Input Power: 5 Watts Max @ +25°C, Derated to 1

Watt @ +85°C

 Typical Phase Linearity: 3o from straight line

 MIL-STD-202 Screening Available

Description

3 dB Hybrids are ideal for dividing a signal into two

signals of equal amplitude and a constant 90° or

180° phase differential and for Quadrature combin-

ing or performing summation/differential combining.

SF-1

Pin Configuration

Pin No. Function Pin No. Function

1 A 3 D

2 B 4 C

Phasing Diagram

OUT

IN A B C D

A ISO -90° 0°

B ISO 0° -90°

C -90° 0° ISO

D 0° -90° ISO

Electrical Specifications1: Freq. = 200 - 400 MHz, TA = -55°C to +85°C

Parameter Test Conditions Units Min Typ Max

Insertion Loss 2 Less Coupling dB — — 0.5

Isolation — dB 18 — —

Amplitude Balance — dB — — 1.0

VSWR — Ratio — — 1.3:1

Deviation from Quadrature — ° — — 4

1. All specifications apply with 50 ohm source and load impedance.

2. Average of coupled output less 3 dB.

This product contains elements protected by United States Patent Number 3,484,724.

Surface Mount Quadrature Hybrid,

200 - 400 MHz

Rev. V3

JHS-142

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Typical Performance Curves

Ordering Information

Part Number Package

JHS-142 PIN SF-1

Surface Mount Quadrature Hybrid,

200 - 400 MHz

Rev. V3

JHS-142

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")

products. These materials are provided by MACOM as a service to its customers and may be used for

informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or

in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM

assumes no responsibility for errors or omissions in these materials. MACOM may make changes to

specifications and product descriptions at any time, without notice. MACOM makes no commitment to update

the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future

changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,

to any intellectual property rights is granted by this document.

THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR

WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR

INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR

OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY

OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN

THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,

WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.

MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM

customers using or selling MACOM products for use in such applications do so at their own risk and agree to

fully indemnify MACOM for any damages resulting from such improper use or sale.