SD6030 Series
Low Profile Power Inductors
1207 BU-SB07328 Page 1 of 3 Data Sheet 4314
Description
•125°C maximum total operating temperature
• Low profile surface mount inductors
• 6.0 x 6.0 x 3.0mm surface mount package
• Ferrite core material
•Shielded drum core reduces EMI
• Inductance range from 2.7µH to 680µH
• Current range from 0.16 amps to 4.08 amps
• Frequency range up to 1MHz
Applications
•Notebook computers, digital cameras
• DSL modems, PDAs
• High power LED driver
• MP3, CD players, GPS receivers
• Cellular phones, smart phones
• Wireless notebook adapters
•Battery power, TFT-LCD bias supplies
• PCMCIA, Cardbus32, MiniPCI cards
Environmental Data
•Storage temperature range: -40°C to +125°C
• Operating temperature range: -40°C to +125°C
(range is application specific)
• Solder reflowtemperature: +260°C max. for 10 seconds maximum
Packaging
•Supplied in tape and reel packaging,2000 per reel
Part Number Rated OCL(1) Irms(2) Isat(3) DCR DCR K-factor(4)
Inductance µH ± 30% Amps Amps mΩ@20°C mΩ@20°C
(µH) (Typical) (Maximum)
SD6030-2R7-R 2.7 2.7 4.08 2.60 13 18 34
SD6030-3R3-R 3.3 3.3 3.54 2.40 18 24 30
SD6030-4R2-R 4.2 4.1 3.11 2.20 23 31 27
SD6030-5R0-R 5.0 4.9 2.81 1.90 28 38 24
SD6030-5R8-R 5.8 5.8 2.58 1.80 33 45 22
SD6030-7R8-R 7.8 7.8 2.38 1.60 39 53 19
SD6030-100-R 10 9.3 2.15 1.30 48 65 17
SD6030-120-R 12 11.3 1.99 1.20 56 76 16
SD6030-150-R 15 14.1 1.71 1.10 76 103 14
SD6030-180-R 18 17.1 1.65 1.00 82 110 13
SD6030-220-R 22 20.4 1.57 0.90 90 122 12
SD6030-270-R 27 26.0 1.31 0.85 130 175 11
SD6030-330-R 33 32.4 1.26 0.75 140 189 9.3
SD6030-360-R 36 34.4 1.19 0.70 157 212 8.7
SD6030-440-R 44 44.0 1.10 0.62 185 250 7.9
SD6030-520-R 52 52.0 0.99 0.58 226 305 7.2
SD6030-680-R 68 65.6 0.92 0.52 263 355 6.5
SD6030-820-R 82 81.6 0.80 0.46 343 463 5.9
SD6030-101-R 100 94.4 0.76 0.42 385 520 5.6
SD6030-121-R 120 110.1 0.70 0.40 517 620 5.6
SD6030-151-R 150 144.5 0.64 0.35 608 730 5.0
SD6030-181-R 180 175.7 0.55 0.32 817 980 4.5
SD6030-221-R 220 210.9 0.50 0.30 1000 1200 4.0
(1) Open Circuit Inductance Test Parameters: 100kHz, 0.1V, 0.0Adc.
(2) Irms: DC current for an approximate ∆Tof 40°C without core loss. Derating is necessary
for AC currents. Pad layout, trace thickness and width, airflow, and proximity of other heat
generating components will affect the temperature rise. It is recommended that the
temperature of the part not exceed 125°C under worst case operating conditions verified
in the end application.
(3) Isat amps peak for 35% rolloff (@25°C)
(4) K-factor: Used to determine B p-p for core loss (see graph).
Bp-p = K*L*∆I, B p-p(mT), K: (K factor from table), L: (Inductance in µH),
∆I(Peak to peak ripple current in amps).
(5) Part Number Definition: SD6030-xxx-R
SD6030 = Product code and size; -xxx = Inductance value in µH;
R=decimal point; If no R is present, third character = # of zeros.
-R suffix = RoHS compliant