Radial lead type SEPF Series RoHS compliance New High voltage High capacitance High voltage type of SEPC series Adopt this series to the high voltage line of input DC/DC converter, etc. Lead free-flow is supported.2 S E P F Items Condition (V) - 16 20 25 32 Surge voltage (V) Room temperature 18 23 29 37 - () Leakage current1 M : 20 120Hz/20 Please see the attached characteristics list Rated voltage applied, after 2 minutes Please see the attached characteristics list 100kHz to 300kHz/20 Please see the attached characteristics list Equivalent series resistance (ESR) Characteristics of impedance ratio at high temp. and low temp. Products list Selection guide Guidelines and precautions for use Fundamental structure Characteristics Reliability Technical data Packing specifications SMD type Packing specifications Radial lead type -55 to 105 120Hz/20 Dissipation Factor (DF) OS-CON Line-up Specifications Rated voltage Capacitance tolerance Image of case size High voltage High capacitance Specifications Category temperature range () Series system diagram SEPF SEPC Based the value at 100kHz, 20 105 Z/Z20 0.75 to 1.25 C/C Within 20% of the initial value DF Within 1.5 times of the initial limit ESR Within 1.5 times of the initial limit 105, 2,000h, Rated voltage applied Endurance 60, 90%RH, 1,000h, No-applied voltage Damp heat(Steady state) Flow method (2605 X 10s) Resistance to soldering heat 0.75 to 1.25 -55 Z/Z20 SVPF LC Within the initial limit C/C Within 20% of the initial value DF Within 1.5 times of the initial limit ESR Within 1.5 times of the initial limit LC Within the initial limit (after voltage processing) C/C Within 5% of the initial value DF Within the initial limit ESR Within the initial limit LC Within the initial limit (after voltage processing) 1 In case of some problems for measured values, measure after applying rated voltage for 120 minutes at 105. 2 Please refer to page 13 for flow soldering conditions. SVPE SVPB SVPA SVQP SVP SEPF SEPC SEQP SEP Marking and dimensions Polarity marking Cathode 223 d Case No. Series SEPF 68 32 (SEPF) F SVPC D SVPD Conductive polymer type SVPS Rated capacitance 15min Rated voltage L Size list F RV (unit : mm) RV : Rated voltage 16 20 32 Size code 22 C55 C55 68 E7 E7 82 150 270 25 E7 C55 180 E7 E12 E7 330 F13 390 52 4min 19min E12 560 E12 1,000 F13 F13 D L max F d 0.05 6.3 5.5 2.50.5 0.45 8.0 7.0 3.50.5 0.53 E12 8.0 12.0 3.50.5 0.6 F13 10.0 13.0 5.00.5 0.6 0.5 3 32SEPF68M is 0.60.05 Radial lead type SEPF Series SEPF series characteristics list 55 E7 E12 F13 Rated voltage (V) Part number Rated capacitance (F) ESR (m) (max) 100kHz to 300kHz/20 Rated ripple current 100kHz (mArms) at 105 DF (% max) Leakage current (A)(max) After 2 minutes 32SEPF22M 32 22 35 2400 12 140 16SEPF150M 16 150 30 2590 12 480 32SEPF68M 32 68 25 3200 10 435 25SEPF82M 25 82 28 3000 12 410 20SEPF180M 20 180 25 3200 12 720 16SEPF270M 16 270 22 3300 12 864 25SEPF180M 25 180 16 4650 12 900 20SEPF390M 20 390 14 4950 12 1,560 OS-CON Line-up 16SEPF560M 16 560 14 4950 12 1,792 25SEPF330M 25 330 14 5000 12 1,650 Guidelines and precautions for use 20SEPF560M 20 560 12 5400 12 2,240 16SEPF1000M 16 1,000 12 5400 12 3,200 S E P F Selection guide Size code Coefficient 120Hz < f < 1kHz 0.05 1kHz < f < 10kHz 0.3 10kHz < f < 100kHz 0.7 100kHz < f 1 < 500kHz Image of case size Products list Packing specifications SMD type Packing specifications Radial lead type Fundamental structure Characteristics Reliability SVPF SVPE SVPS Conductive polymer type Frequency Technical data Frequency coefficient for ripple current Series system diagram SVPD SVPC SVPB SVPA SVQP SVP SEPF SEPC SEQP SEP 53