CUSTOMER DRAWING
TITLE:
T-FIT ADAPTER AND MOLDED BOOT KITS
Unless otherwise specified dimensions are in inches.
[Metric dimensions are shown in brackets] Raychem
Devices DOCUMENT NO.: T-FIT-2-12X
TOLERANCES:
0.00 ± 0.02 MM
0.0 ± 0.2 MM
0 ± 0.5 MM
ANGLES: ± 0°30’
ROUGHNESS
IN MICRON
Tyco Electronics Corporation reserves
the right to amend this drawing at any
time. Users should evaluate the
suitability of the product for their
application.
REV: AN REV DATE:
January 18, 2018
PREPARED BY:
YNGUYEN CAGE CODE:
06090 ECO NUMBER:
ECO-18-000887 SCALE: NTS SIZE:
A SHEET: 1 of 2
© 2007-2018 TE Connectivity Corp. All Rights Reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
KIT COMPONENTS:
A standard kit shall contain 1 piece each: Adapter, Boot, SolderShield® Splice, Atum tubing (Kit description ends in "A” only)
1. ADAPTER (STRAIGHT , 45 OR 95 DEGREE). Refer to TXR (XX) Adapter drawings for details where (XX) = Adapter Code.
Available Adapter Codes (XX): 15, 18, 21, 30, 32, 40, 41, 54, 61
2. MOLDED BOOTS. Available Sizes: 13, 23, 34, 44, 56, 67.
:
3. SolderShield® SPLICES. Available Sizes: 00, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 16. Use code 00 when a
non-pre-braided adapter is used. (Pre-Braided Code - 0).
4. SHIM TUBING. (KIT DESCRIPTIONS END WITH LETTER “A” ONLY)
EXPANDED AS SUPPLIED FULLY RECOVERED AFTER HEATING
CUSTOMER DRAWING
Unless otherwise specified dimensions are in millimeters.
(Inches dimensions are shown in brackets)
DOCUMENT NO.:
T-FIT-2-12X REV:
AN ECO NUMBER:
ECO-18-000887 DATE:
18-Jan-2018 SHEET:
2 of 2
If this document is printed it becomes uncontrolled. Check for the latest revision.
ADAPTER PART NUMBER KEY
40 08 -10-2306 10 A
Adapter Code A = Shim included
Blank = Shim not included
Adapter Shell Size Order Number Adapter entry size
Connector Man ufacturer Code (Code 18 Only) Device size designator
"-" = Not Applicable "00" for non-prebraided adapter, Code " 0"
1 = with pre-b raid adapter and a device Boot size designator
0 = Non-pre-braided adapter and no device
Adapter Angle: Field Separator
0 = straight
1 = 45 degree
2 = 90 degree
