SPEC NO: DSAN0652 REV NO: V.1A DATE: JUN/24/2013 PAGE: 1 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000241
57mm (2.3INCH) SINGLE DIGIT NUMERIC
DISPLAY
Part Number: SA23-12GWA Green
Features
z2.3 inch digit height.
zLow current operation.
zExcellent character appearance.
zHigh light output.
zEasy mounting on P.C. boards or sockets.
zMulticolor available.
zMechanically rugged.
zStandard : gray face, white segment.
zRoHS compliant.
Description
The Green source color devices are made with Gallium
Phosphide Green Light Emitting Diode.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAN0652 REV NO: V.1A DATE: JUN/24/2013 PAGE: 2 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000241
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA Description
Min. Typ.
Green (GaP) White Diffused
31000 65000 Common Anode, Rt.
Hand Decimal
*9000 *20000
SA23-12GWA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Green 565 nm IF=20mA
λD [1] Dominant Wavelength Green 568 nm IF=20mA
Δλ1/2 Spectral Line Half-width Green 30 nm IF=20mA
C Capacitance Green 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage
(DP) Green 8.8
(4.4)
10.0
(5.0) V IF=20mA
IR Reverse Current
(Per Chip) Green 10
(10) uA VR=5V
(VR=5V)
Parameter Green Units
Power dissipation
(DP)
250
(125) mW
DC Forward Current
(DP)
25
(25) mA
Peak Forward Current [1]
(DP)
140
(140) mA
Reverse Voltage
(Per Chip)
5
(5) V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3-5 Seconds
Notes:
1. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
SPEC NO: DSAN0652 REV NO: V.1A DATE: JUN/24/2013 PAGE: 3 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000241
Green SA23-12GWA
SPEC NO: DSAN0652 REV NO: V.1A DATE: JUN/24/2013 PAGE: 4 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000241
SPEC NO: DSAN0652 REV NO: V.1A DATE: JUN/24/2013 PAGE: 5 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000241
PACKING & LABEL SPECIFICATIONS SA23-12GWA
SPEC NO: DSAN0652 REV NO: V.1A DATE: JUN/24/2013 PAGE: 6 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000241
SPEC NO: DSAN0652 REV NO: V.1A DATE: JUN/24/2013 PAGE: 7 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000241
All design applications should refer to Kingbright application notes available at
http://www.KingbrightUSA.com/ApplicationNotes
