AQS225R2SZ - Panasonic - Datasheet.Directory

RF SOP 4 Form A Low on-resistance (AQS225R2S)

TYPES

* Indicate the peak AC and DC values.

Note: The packing style indicator “X” or “Z” is not marked on the relay.

RATING

1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)

Space-saving

SOP16-pin type

featuring lo w on-resistance

with 80V load voltage RF SOP 4 F orm A

Low on-resistance (A QS225R2S)

Output rating*

Package

Part No. Packing quantity

Load

voltage Load

current Tube packing style Tape and reel packing style Tube Tape and reel

Picked from the 1/2/3/4/5/

6/7/8-pin side Picked from the 9/10/11/

12/13/14/15/16-pin side

AC/DC

dual use 80V 70mA SOP16-pin AQS225R2S AQS225R2SX AQS225R2SZ

1 tube contains:

50 pcs.

1 batch contains:

1,000 pcs.

Item Symbol AQS225R2S Remarks

Input

LED forward current IF50 mA

LED reverse voltage VR5 V

Peak forward current IFP 1 A f = 100 Hz, Duty factor = 0.1%

Power dissipation Pin 75 mW

Output

Load voltage (peak AC) VL80 V

Continuous load current IL0.07 A Peak AC, DC

Peak load current Ipeak 0.2 A 100 ms (1 shot), VL= DC

Power dissipation Pout 600 mW

Total power dissipation PT650 mW

I/O isolatiom voltage Viso 1,500 V A C

Temperature

limits Operating Topr –40°C to +85°C –40°F to +185°FNon-condensing at low temperatures

Storage Tstg –40°C to +100°C –40°F to +212°F

mm inch

FEATURES

1. 4-channel (4 Form A) in a small

SOP16-pin package

The device comes in a miniature SOP

measuring (W) 10.37 × (L) 4.4 × (H)

2.1mm (W) .408 × (L) .173 × (H)

.083inch— approx. 50% of the footprint

size of 8-pin (2-channel) type.

2. Low C×R and high response speed

• Output capacitance: 4.5pF (typ.)

• On resistance: 10.5Ω (typ.)

• Turn on time: 0.04ms (typ.)

3. Applicab le f or 4 Form A use, as well

as 4 independent 1 Form A

4. Low-level off state leakage current

of typ. 0.01nA

5. Controls low-level analog signals

TYPICAL APPLICATIONS

For multi-circuit switching;

1. Measuring and testing equipment

IC tester, Liquid crystal driver tester,

Probe card, Bear board tester,

In-circuit tester, Function tester, etc.

2. Communication and broadcasting

equipment

3. Medical equipment

Ultrasonic wave diagnostic machine

4. Multi-point recorder

Warping, Thermo couple

4.4

2.1

10.37 .173

.083

.408

Compliance with RoHS Directive

SOP 2-channel type AQS225R2S

Footprint

Approx. 50%

PhotoMOS.book Page 211 Thursday, March 26, 2009 2:21 PM

RF SOP 4 Form A Low on-resistance (AQS225R2S)

2. Electrical characteristics (Ambient temperature: 25°C 77°F)

*Turn on/Turn off time

RECOMMENDED OPERATING CONDITIONS

Please obey the following conditions to ensure proper relay operation and resetting.

■ For Dimensions

■ For Schematic and Wiring Diagrams

■ For Cautions for Use

■ These products are not designed for automotive use.

If you are considering to use these products for automotive applications, please contact your local Panasonic Electric

Works technical representative.

For more information

REFERENCE DATA

Item Symbol AQS225R2S Condition

Input

LED operate current Typical IFon 0.9 mA IL = Max.

Maximum 3 mA

LED turn off current Minimum IFoff 0.3 mA IL = Max.

Typical 0.85 mA

LED dropout voltage Typical VF1.25 V (1.14 V at IF = 5 mA) IF = 50 mA

Maximum 1.5 V

Output

On resistance Typical Ron 10.5ΩIF = 5 mA

IL = Max.

Within 1 s on time

Maximum 15

Ω

Output capacitance Typical Cout 4.5 pF IF = 0

VB = 0 V

f = 1 MHz

Maximum 6 pF

Off state leakage current Typical ILeak 0.01 nA IF = 0

VL = Max.

Maximum 10 nA

Transfer

characteristics

Turn on time* Typical Ton 0.04 ms IF = 5 mA

IL = Max.

Maximum 0.3 ms

Turn off time* Typical Toff 0.07 ms IF = 5 mA

IL = Max.

Maximum 0.2 ms

I/O capacitance Typical Ciso 0.8 pF f = 1 MHz

VB = 0

Maximum 1.5 pF

Initial I/O isolation resistance Minimum Riso 1,000 MΩ500 V DC

Item Symbol Recommended value Unit

Input LED current IF5 mA

Ton

Input

Output 10%

90%

Toff

1. Load current vs. ambient temperature

characteristics

Allowable ambient temperature: –40°C to +85°C

–40°F to +185°F

2. On resistance vs. ambient temperature

characteristics

LED current: 5 mA;

Continuous load current: 70 mA (DC)

3. Turn on time vs. ambient temperature

characteristics

LED current: 5 mA; Load voltage: 80 V (DC);

Continuous load current: 70 mA (DC)

100

–40 –20 0 20 40 60

100

Ambient temperature, °C

Load current, mA

–40 –20 0 20 40 60

100

Ambient temperature, °C

On resistance, Ω

0.05

0.1

0.15

0.2

0.25

–40 –20 0 20 40 60

100

Ambient temperature, °C

Turn on time, ms

PhotoMOS.book Page 212 Thursday, March 26, 2009 2:21 PM

RF SOP 4 Form A Low on-resistance (AQS225R2S)

4. Turn off time vs. ambient temperature

characteristics

LED current: 5 mA; Load voltage: 80 V (DC);

Continuous load current: 70 mA (DC)

5. LED operate current vs. ambient

temperature characteristics

Continuous load current: 70 mA (DC)

6. LED turn off current vs. ambient temperature

characteristics

Continuous load current: 70 mA (DC)

0.05

0.1

0.15

0.2

0.25

–40 –20 0 20 40 60

100

Ambient temperature, °C

Turn off time, ms

0.5

1.5

2.5

–40 –20 0 20 40 60

100

Ambient temperature, °C

LED operate current, mA

0.5

1.5

2.5

–40 –20 0 20 40 60

100

Ambient temperature, °C

LED turn off current, mA

7. LED dropout voltage vs. ambient

temperature characteristics

LED current: 5 to 50 mA

8. Current vs. voltage characteristics of output

at MOS portion

Ambient temperature: 25°C 77°F

9. Off state leakage current vs. load voltage

characteristics

Ambient temperature: 25°C 77°F

1.5

1.4

1.3

1.2

1.1

-40 -20 0 20 40 60

8085

100

50mA

30mA

20mA

10mA

5mA

Ambient temperature, °C

LED dropout voltage, V

–2 –20

–40

–60

–80

–1.5 –1 –0.5 0 0.5 1 1.5 2

Voltage, V

Current, mA

200 40 60 80 100

10–3

10–6

10–9

10–12

Load voltage, V

Off state leakage current, A

10. Turn on time vs. LED forward current

characteristics

Load voltage: 80 V (DC); Continuous load current:

70 mA (DC); Ambient temperature: 25°C 77°F

11. Turn off time vs. LED forward current

characteristics

Load voltage: 80 V (DC); Continuous load current:

70 mA (DC); Ambient temperature: 25°C 77°F

12. Output capacitance vs. applied voltage

characteristics

Frequency: 1 MHz, 30 m Vrms;

Ambient temperature: 25°C 77°F

0.25

0.2

0.15

0.1

0.05

00 10 20 30 40 50 60

LED forward current, mA

Turn on time, ms

0.25

0.2

0.15

0.1

0.05

00 10 20 30 40 50 60

LED forward current, mA

Turn off time, ms

0 20 40 60 80 100

Applied voltage, V

Output capacitance, pF

13. Isolation vs. frequency character istics

(50Ω impedance)

Ambient temperature: 25°C 77°F

14. Insertion loss vs. frequency characteristics

(50Ω impedance)

Ambient temperature: 25°C 77°F

100

104105106107

Frequency, Hz

Isolation, dB

0.5

1.5

104105106107

Frequency, Hz

Insertion loss, dB

PhotoMOS.book Page 213 Thursday, March 26, 2009 2:21 PM