BY396P thru BY399P Vishay General Semiconductor Soft Recovery Fast-Switching Plastic Rectifier Major Ratings and Characteristics IF(AV) 3.0 A VRRM 100 V to 800 V IFSM 100 A trr 500 ns IR 10 A VF 1.25 V Tj max. 125 C DO-201AD Features Mechanical Data * * * * * Case: DO-201AD, molded epoxy body Epoxy meets UL-94V-0 Flammability rating Terminals: Matte tin plated (E3 Suffix) leads, solderable per J-STD-002B and JESD22-B102D Polarity: Color band denotes cathode end Fast switching for high efficiency Low forward voltage drop Low leakage current High forward surge capability Solder Dip 260 C, 40 seconds Typical Applications For use in fast switching rectification of power supply, inverters, converters and freewheeling diodes for consumer and Telecommunication. (Note: These devices are not Q101 qualified. Therefore, the devices specified in this datasheet have not been designed for use in automotive or Hi-Rel applications.) Maximum Ratings (TA = 25 C unless otherwise noted) Parameter Symbols BY396P BY397P BY398P BY399P Units Maximum repetitive peak reverse voltage VRRM 100 200 400 800 V Maximum RMS voltage VRMS 70 140 280 560 V 100 200 400 800 V Maximum DC blocking voltage VDC Maximum average forward rectified current 0.375" (9.5 mm) lead lengths at TA = 50 C IF(AV) 3.0 A Peak forward surge current 10 ms single half sine-wave superimposed on rated load at TA= 50 C IFSM 100 A Maximum repetitive peak forward surge at f < 15 KHz IFRM 10 A TJ - 50 to + 125 C TSTG - 50 to + 150 C Operating junction temperature range Storage temperature range Document Number 88542 10-Oct-05 www.vishay.com 1 BY396P thru BY399P Vishay General Semiconductor Electrical Characteristics (TA = 25 C unless otherwise noted) Parameter Test condition Maximum instantaneous forward voltage Symbols BY396P BY397P BY398P BY399P at 3.0 A TA= 25 C TA= 100 C Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time at IF = 10 mA, IR = 10 mA, Irr = 1.0 mA Units VF 1.25 V IR 10 500 A trr 500 ns Maximum forward recovery time at 100 mA, di/dt = 50 A/s tfr 1.0 s Typical junction capacitance at 4.0 V, 1 MHz CJ 28 pF Thermal Characteristics (TA = 25 C unless otherwise noted) Parameter Symbols BY396P BY397P BY398P BY399P RJA Typical thermal resistance (1) Units 22 C/W Notes: (1) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length with both leads to heat sink Ratings and Characteristics Curves (TA = 25 C unless otherwise noted) 200 Resistive or Inductive Load 3.0 2.0 1.0 0.375" (9.5 mm) Lead Length TA = 50 C 10 ms Single Half Sine-Wave At Rated Load 100 10 0 0 20 40 60 80 100 120 140 1 10 100 Ambient Temperature (C) Number of Cycles at 50 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 4.0 Document Number 88542 10-Oct-05 BY396P thru BY399P Vishay General Semiconductor 100 10 TJ = 25 C Pulse Width = 300 s 1% Duty Cycle 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 TJ = 25 C f = 1.0 MHz Vsig = 50mVp-p Junction Capacitance (pF) Instantaneous Forward Current (A) 100 1.8 10 2.0 1 10 100 Reverse Voltage (V) Instantaneous Forward Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance Instantaneous Reverse Current (A) 10 TJ = 100 C 1 TJ = 50 C 0.1 TJ = 25 C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics Package outline dimensions in inches (millimeters) DO-201AD 1.0 (25.4) Min. 0.210 (5.3) 0.190 (4.8) Dia. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) Min. 0.052 (1.32) 0.048 (1.22) Dia. Document Number 88542 10-Oct-05 www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1